The Best 1-ohm Car Mono Amplifiers of 2023

Premium black series with configurable adjustments

1 ohm

Excellent for voice as well as bass

3000 watts

Mono

Wattage output:

4 ohms: 750 x 1

2 ohms: 1,500 x 1

1 ohm: 3,000 x 1

Wired bass knob included

Efficient Class-D amplifier

Variable 12dB crossovers provides control to dial in perfect sound

KickEQ 6dB variable bass boost for those additional low frequencies

Variable 12dB crossovers provides control to dial in perfect sound

24dB subsonic filter for protection from potentially damaging frequencies

maximum power of 5.000W in a single-channel, running at a 1-ohm impedance, with frequency responses at a rate from 8Hz to 250Hz

unique efficiency and performance for automotive audio systems.

5000 Watts Class D Mono Amplifier

Item Package Weight: 11.0 pounds

Features: Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Mono Car Amplifier, Metal Bass Remote Included, 1 Ohm: 1000 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (74.1% efficient), 2 Ohm: 600 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (84.5% effic

Peak: 4000 Watts @ 1 Ohm (Only use this power as reference if matching with amps that do not have an RMS rating), High-Speed MOSFET Power Supply, Class D Technology, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry

Phase Control Switch, Full IC-Controlled Protection Circuitry, Adjustable 0-18dB Bass Equalizer, Mute and Delay Soft Start System, Status Mode LED Indicator, Minimum THD at Rated Power: <0.1%

S/N Ratio: >90dB, Under Voltage Protection at 9V, Over Voltage Protection at 16V, Radiation cooling keeps the amp running at high volumes for hours straight, Extruded aluminum heatsink, Frequency Response: 10Hz - 300Hz

Damping Factor: >150 @ 100Hz, Fuse: 40A*3, Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money, Dimensions: (L x W x H) 14" x 8.5" x 2.24", Weight:7.8 lbs

Package Includes: (1) Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp.(1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA

Features of RXD-M0: Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp.Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).1 Ohm : 300 Watts x 1 Channel <1% THD+N.2 Ohm : 200 Watts x 1 Channel <1% THD+N.4 Ohm : 150 Watts x 1 Channel <1% THD+N.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).1 Ohm : 1200 Watts x 1 Channel.2 Ohm : 800 Watts x 1 Channel.4 Ohm : 600 Watts x 1 Channel.High-Speed MOSFET Power Supply.Optical Coupler Class "D" Technology.Studio-Grade Bipolar Output Stage Transistors.Now exclusively with "Professional Peak Limiter Circuitry" which guarantees distortion free musical playback at all levels..

Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit.(1) 17' High Grade Twisted Pair of 100% Copper RCA Cable.17' 8 Gauge Translucent Blue Super Flex Power Cables.17' 18 Gauge Blue Remote Cable.17' 16 Gauge Clear Speaker Wire.3' 8 Gauge Super Flex Ground Wire.Gold Plated AGU Heat Resistant Fuse Holder.60 Amp AGU Gold Plated Fuse.

7' Split Tube Loom.Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets.Soft abrasion proof insulating jacket allows for 100% improved flexibility.PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.

BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.

MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.

HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.

CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.

The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.

The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.

The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.

Max Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 1 ohm: 1200 watts x 1 chan.

Dimensions: 9"W x 13.25"L x 2.5"H, 1-year Manufacturer's Warranty

Harmony Audio HA-A400.1 Car Stereo Class D Amp Mono 800 Watt Subwoofer Amplifier

Amp is Stable down to a 1 Ohm Load!

Includes Remote Mount Bass Control Knob!

Includes Speaker Wire to RCA Adapter to Connect to an OEM Factory Radio

POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms. DIMENSIONS: The OX3KD is 12.3 inches in Depth, 7 inches in Width and 2.3 inches in Height. It weighs 6.5 lbs.

CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power

WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality