The Best 300-watt Car Mono Amplifiers of 2022

High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote Car Audio Mono-channel Amplifier / Amplifier Class: AB

Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz

Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V

Total Harmonic Distortion: <0.05% / RCA Input: 2-channel / Fuse: 30A x 1

Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct

POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room

LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion

DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE

EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response

A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!

The Punch P300X1 is a small chassis (2.38” x 7.76” x 9.86”) full-range mono amplifier capable of producing 300 Watts into a 2-Ohm load

Perfect for use as a dedicated subwoofer or center channel amplifier (RMS Power Output: 200 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

Featuring Class A/B topology, RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

MRV-M500 - Alpine Monoblock 500W RMS Amplifier

Evolution to Class D digital platform

New snap-on terminal covers for easy installation

Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection

Dimensions (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''

The Punch P300X1 is a small chassis (2.38” x 7.76” x 9.86”) full-range mono amplifier capable of producing 300 Watts into a 2-Ohm load

Perfect for use as a dedicated subwoofer or center channel amplifier (RMS Power Output: 200 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

Featuring Class A/B topology, RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels

HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com

The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

4 Gauge Car Amplifier Wiring Installation Kit. (1) 17 High Grade RCA Cable. 17' 4 Gauge Translucent Blue Power Cables. 17' 18 Gauge Blue Remote Cable. 17' 16 Gauge Clear Speaker Wire. 3' 4 Gauge Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder.

Package Includes: (1) Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp.(1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA

Features of RXD-M0: Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp.Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).1 Ohm : 300 Watts x 1 Channel <1% THD+N.2 Ohm : 200 Watts x 1 Channel <1% THD+N.4 Ohm : 150 Watts x 1 Channel <1% THD+N.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).1 Ohm : 1200 Watts x 1 Channel.2 Ohm : 800 Watts x 1 Channel.4 Ohm : 600 Watts x 1 Channel.High-Speed MOSFET Power Supply.Optical Coupler Class "D" Technology.Studio-Grade Bipolar Output Stage Transistors.Now exclusively with "Professional Peak Limiter Circuitry" which guarantees distortion free musical playback at all levels..

Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit.(1) 17' High Grade Twisted Pair of 100% Copper RCA Cable.17' 8 Gauge Translucent Blue Super Flex Power Cables.17' 18 Gauge Blue Remote Cable.17' 16 Gauge Clear Speaker Wire.3' 8 Gauge Super Flex Ground Wire.Gold Plated AGU Heat Resistant Fuse Holder.60 Amp AGU Gold Plated Fuse.

7' Split Tube Loom.Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets.Soft abrasion proof insulating jacket allows for 100% improved flexibility.PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F