The Best Analog Multiplexers of 2023

Function: Use 16 ADCs to collect 16 analog signals.

Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.

Analog output: DIG;Channel control: S0-S3

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.

16 BNC Video Inputs - Each input accepts and supports Analog CCTV, AHD, HD-TVI, and HDCVI cameras.

Dual Monitor Output Supported - VGA and HDMI ports may be used at the same on two separate monitors.

Multiple Viewing Modes - Users can select from multiple grid displays including Full Screen / Single Camera, Grid View / 16 Cameras, Picture-in-Picture, Horizontal & Vertical Split Screen, and Auto Sequencing.

Wireless Infrared Remote Control and Power Supply Included

NTSC and PAL Video Formats Supported

Support 2 channel 1080P CVI/AHD/TVI Camera or Analog Camera.

Transmit Over SYV75-3 Single core coaxial cable.

Max distance: 1300 Feet (400m).

The HD multiplexer converter 2 video signals into digital signal and transmit over single Coax cable.

The CCTV multiplexer used for the locations that don’t have enough coaxial cable resource and projects need to save cost for cabling.

★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

★2V to 6V operation

★6ns break-before-make @ 4.5V,"On" resistance: 70 Ohms @ 4.5V

★Wide operating temperature range: -55C to 125C

★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above

To achieve fast turn-on and off the circuit, an unlimited number of switching;

Conducting and cutting process does not produce noise, no spark, no electromagnetic interference;

Compared with electromagnetic relay products, longer life;

The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature, operating current of up to 15A, power up to 400W, to meet the most use of the equipment;

A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient.

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).

It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!

Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.

The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).

Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.

Analog output: DIG;Channel control: S0-S3

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.

To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!

Use 16 ADCs to collect 16 analog signals.

Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.

Analog output: DIG;Channel control: S0-S3

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.

This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)

This is a breakout board for the very handy 16-Channel Analog Digital Multiplexer Demultiplexer CD74HC4067. This chip is like a rotary switch it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins.

The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).

The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!

Package Included:11Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)

Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.

The 74HC4051 is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).

The 74HC4051 is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).

When E is low, one of the 8 switches will be selected by S0-S2 (low-impedance state). When E is high, all switches enter a high-impedance state, directly ignoring S0-S2.

VCC and GND are the supply pins for the digital control terminals (S0-S2, E). The VCC to GND range of the 74HC4051 is 2.0V-10.0V. The analog input/output terminals (Y0-Y7, Z) of the 74HC4051 swing between the upper limit VCC and the lower limit VEE, and VCC-VEE should not exceed 10.0V.

As a digital multiplexer/demultiplexer, the VEE will be connected to GND (typically grounded).