The Best Auto Phone Holder of 2023

EASY ONE TOUCH MECHANISM: Press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. The mount’s arms will close automatically, holding your device securely while you drive. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism.

WIDE COMPATIBILITY: New larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.

MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located near the bottom foot

TELESCOPIC ARM: The improved telescopic arm now extends from 5 inches to 8 inches (as opposed to the Easy One Touch 4 which only extended to 6.5inch) and pivots 260 degrees. This enables a myriad of customized viewing angles while you’re on the road.

ADJUSTABLE BOTTOM FOOT: You can easily and securely adjust the bottom foot by squeezing the spring button.

🚓【Qi 10W Fast Charging】— Adopts high charging efficiency upgraded independent coil, Qi wireless fast charging provides up faster charge than most wireless car chargers mounts in the market. GAXLAKO

🚓【Infrared Auto-sensing & Single-handed Operation】— When put the phone near 3 cm to the infrared auto-sensing area of the car phone holder, the width of the holder can be flexibly adjusted to hold phones of size from 4.0"-6.0" automatically.

🚓【Air Vent Phone Holder Mount】— Compared with windshield or dashboard mount, the air vent mount is much easier for you to reach the phone in the car and causes less distraction during driving.No Tools Needed.

🚓【Quality Material & Easy to Install】— Anti-scratch & anti-slip rubber material base padding for a secure and safe grip, allowing for a worry-free journey. You can securely install this phone holder on almost any vehicles air vents with a hassle-free mounting that is managed in seconds, with absolutely no tools required.

🚓【Compatibility】— Works with most smartphones, regardless of size or shape. Wireless charging for Qi-enabled and Quick Charging devices only.

[Qi Wireless Car Fast Charger] Qi certificated, the 15W wireless car charger mount is for LG V50/V40/V30+/V30/V40,ThinQ G8/G8S/G7; 10W for Samsung Galaxy S20+/S20/Note 10+/Note 10/S10+/S10; 7.5W for iPhone 13 pro max/13 pro/13/12 Pro/12/11/11 Pro/11 Pro Max /SE /XS /X/XR/8 Plus/8. And other Qi-enabled cell phone with up to 5W standard charging. Note: iPhone 12 Mini is not supported.

[Auto-Sensing & Smart Charging] After connecting to the cable, Joyroom car phone holder mount wireless charging will automatically clamp when your phone is dropped in. A gentle touch on the 2 sides button of the car charger can make the arms open, which make your driving easier and safer. When your phone is fully charged, the wireless charging car mount will automatically power off to protect the battery of your phone.

[Super Stable Base] Joyroom phone mount for car wireless charger's base is equipped with a powerful suction cup and professional 3M adhesive (high temperature resistant). The base's suction cup has been tested thousands of times, it can absorb more than 20 pounds of objects without dropping. Even if passing speed bumps or driving on mountain roads, you don’t need to worry about it falling. In addition, the bracket arm and clip are equipped with silicone pads for anti-slip and anti-vibration.

[Flexible Angle & Case Friendly] With retractable & foldable bracket and 360° rotatable head, it never block your driving sight, you can adjust it to a position that makes you comfortable. Joyroom car mount wireless charger supports charging through phone cases up to 4mm thick. Please note that cases made of metal, external attachments such as magnets, credit cards, grips, and stands will interfere with charging.

[2 In 1 Design] Combines the wireless phone charger & car phone mount, allows for a secure hands-free experience. Keep you away from the tangled locating cords or cables. Joyroom car phone holder mount charger is suitable for Windshield, Dashboard, Air Vent installation, and makes GPS and phone call more convenient

Casiab已经备案至本店铺，跟卖必投诉 15W Fast Charging -- Adopts high charging efficiency upgraded independent coil,Qi wireless fast charging provides up faster charge than most wireless car charger mount in the market.

Air Vent Phone Holder Mount -- Compared with windshield or dashboard mount, the air vent mount is much easier for you to reach the phone in car and causes less distraction during driving.No Tools Needed.

Compatiblity-- Works with most smart phones, regardless of size or shape. Wireless charging for Qi-enabled and Quick Charging devices only.

Convenient -- Wireless Automatic Sensor Car Phone Holder Charger Combines Air Vent Mount, Convenient viewing and wireless charging on the driving.

Useful -- Get the most out of your phone while driving with this wireless charging mount that allows easily viewing of your smartphone with no need to constantly plug into power.

[Stick - Sticker - Stickiest] This universal cell phone car mount uses Torras's third-generation suction cup, with three layers of super glue, which makes the mount sticks firmly to your car dashboard or windshield.

[Strong Muscular Arms] Based on a year-long test, we found the most suitable wrapping angle for the car mount. The designed arm is more wrapping than the normal mounts. It hugs the "child" tightly like a father's thick arm. Such a strong arms is a perfect choice most of the phones, especially for the heavy duty phones, such as iPhone 12 pro max / iPhone 11 pro max / Samsung Galaxy Note S21 Ultra.

[Skidproof! Scratch-proof!] Torras never ignores every detail, even the small silicone pads, which have been rigorously tested. For most of the silicone pads on the market, we use the latest vacuum nanotechnology, which can adjust the shape of the silicone according to the size of the phone, ensuring that there is no gap between the phone car holder and the phone! So you needn’t to worry about your phone suddenly falling off during the journey!

[3 In 1 Multi-function] With the latest powerful suction cup and air vent clip, this car phone mount could be installed on car dashboard, windshield or air vent securely. Even on the off road, it won't stop working; Great choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.

[Military Grade PP Material] Say goodbye to the easy-scratched plastic panel car mount .Adopt top quality PC and bite structure, passed the latest 17 shaping process. High quality and perfect appearance! It's not only a car holder in your car, but also a great decoration!

[Super Secure Car Phone Holder] Unique streamlined inward shrinking clamp, hug your phone tightly, never fall off; Press the lock mechanism of the suction cup, it will make the car phone mount tightly locked on the dashboard; With the extra sticky pad, it helps create a smooth surface when the dashboard is not flat; Triangle air vent clip, as solid as a rock, you can rotate the wrench to tighten it according to the thickness of the vent; The supporting pieces will lock it from fall down.

Broad Vision: Qifutan cell phone car mount features a 16cm/6.2in aluminum long gooseneck that sends your phone much closer to you. It can be mounted on the dashboard or windshield firmly. Most importantly, you can bend it in every direction to avoid obstructing the view

Secure Steady Installation: Qifutan car mount for iphone 13/12/11 features an extra-strong vacuum suction cup with a layer of super sticky gel, a locking lever, and an anti-shake stabilizer. It sticks securely and easily on the dashboard or most flat surfaces and removes the phone car mount without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, then let it air dry.)

One-Hand Operation: Press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. Make your operation more fluently. Fit well for the smartphone which’s the width between 4''-7''in and the most thickness

Smooth Contact: The car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. Perfect choice for most cars, vehicle, pickup trucks, SUVs, trucks, taxis; a good assistant for Uber, Lyft drivers

Ideal Viewing Angle: The car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle. It is favorable for navigation and sending and receiving phone calls. You can enjoy a more convenient and secure drive

【Quick One Touch Lock/Release】: VICSEED car holder phone mount adopts the latest designed Quick One Touch Lock Mechanism Allows Quick One Hand Open and Close Operation. You will feel unprecedented convenience. Car phone holder made of the aviation material “PTFE”, so it could work well for you in extremely harsh environments

【Never Fall Off, Double Stable Vent Clip】: VICSEED product manager designed the first car phone mount with a combination of "Hook Shape" and "Three Grasp Points" on amazon. [ Stronger & Tighter ] The clip hook will catch one of the car air vent blades to achieve absolute fixation. This car phone holder has “Three Grasp Points” with thickened shockproof sponge and rubber, which could hold the phone steadier than others. Even on some rough roads, it can hold your phone firmly

【Ultimate Protection, Hold The Phone Firmly】: Say goodbye to the easy scratched and fall plastic panel mount. VICSEED iphone car holder adds a high-density and excellent resilience rubber pads, stable support feet, firm & anti-scratch clamp arm offer a secure grip for your cellphone to ensure your mobile device is safe from wear and fall. The unprecedented design makes leaves zero scratches on mobile devices

【Universal Compatibility Phone Holder for Car】: VICSEED iphone car mount is one of the most compatible holders on Amazon. The upgraded clamp arm can be perfectly adapted to mobile phones with thick cases. The adjustable foot design is compatible with all 4.0"-7.0" smart phones. Fit for iPhone 12/ 12 Pro/ 12 Pro Max/ SE/ 9/ 11 Pro Max/ 11 Pro/ 11/ XS MAX/ XS/ XR/ X/ 8/ 8 Plus/ 7/ 6. Also compatible with Samsung Galaxy Note 10/ Note 10+/ S20/ S20 Plus/ S10/ S10e/ S10+/ S9/ LG Google etc

【Extreme Flexibility & Convenience】: 360° rotating and pivoting ball joint gives you the best viewing angle and allows quick switching between portrait and landscape view. VICSEED car iphone holder car mount gives you an easy and safe driving journey.

100% Designed, Engineered, and Manufactured in the USA by WeatherTech!

Designed using interchangeable base cups allowing you to customize the perfect snug fit.

The adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases.

Base allows phone to rotate 360°, adjustable for viewing from any seat position.

Open access bottom lets you easily charge your mobile device while it is in place.

Knob tightens easily and securely locks position

👍Attach to The A/C Vents Solidly, Never Slip & Fall: Car phone holder mount is designed as “hook shape”, though rotate the knob to attach & hook the louver tightly, built-in metal and ensure it won't break the air vent and hook, even bumpy road. LISEN cell phone holder car is BORN FOR STURDY & PRACTICABILITY, It solves the problem that common clips on the market are easy to Slip & Droop over time. PLEASE NOTE THAT THE LENGTH OF THE CLIP IS ADJUSTABLE BY TURNING THE "WHEEL" KNOB.

👍Perfectly Compatible with Horizontal & Vertical Vents: The Metal hook clip of cell phone mount for car is 50% longer than the ordinary one. It can be compatible with 99% Horizontal & Vertical vents, which solves the common other holder problems of poor compatibility and is easy to fall on the market. we upgrade the iPhone car holder to meet all the needs of the car vent. Note: Round vents are incompatible, like Mercedes-Benz, Wrangler, Truck, Honda Civic, etc.

👍Strong Clamp Arm, Rock Solid Grip! : Cell phone car holder that has a most strong clamping force of up to 48 LB (equivalent to 70 iPhone 13 pro max) on the market. Benefit from the thickest threaded anti-skid pad, precision gears, and springs, and the deepest clasp depth (0.7 inches), It which completely solves the common problems of cellphone pop up, shaking, sliding, and falling, and protects it in all directions safe, grip the phone tightly around even on bumpy roads.

👍Hold All Thick Case & Big Phone: Car cell phone holder has the thickest non-slip pad & the 1.09in clasp length, enough to accommodate 4-7 inch all phone Apple iPhone 13/ 13 Pro Max / 13 Mini / 13 Pro / 12 5G/ 12 Pro Max / 12 Mini / 11 Pro Max / XS / XR / XS Max / 8 Plus / 7 Plus / SE / 6s / 6 Plus / Samsung Galaxy S20+ /Note10 / S10 /S9+ / S8 Note 8 S7 Edge; Sony; Huawei; Motorola; Nokia, and friendly to all thick case【compatible with Otter box case, Battery case, MagSafe case, Spigen, etc】

❤️TOP TEAM SUPPORT, 3 YEARS HASSLE-FREE❤️: Phone mount car is Officially-Certified, if the product arrives doesn‘t fit a car or gets broken within 3*12 months, please directly contact LISEN for a satisfied solution. Cell phone holder car is easy to use, just use two fingers to press to clamp/release, no change the posture and position. (Package Includes: 1*phone holder car, 1*Hint paper,1*2022 upgrade metal hook clip, 1*User Manual).

👍 THE EASIEST OPERATION & JUST SLIDE IN AND GO: Just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation and a strong stable hold without button to press. Easy to drop phone in and pick phone up with two fingers.

👍 UPGRADED AIR VENT HOOK: This car vent phone holder mount is designed as "Hook shape" and form "Three grasp points" which can firmly hook around the a/c vent for no slippage or movement. It solving the market's common problem of falling forward and off the air vent constantly when going over bumps or turns. NOTE: THE LENGTH OF CLAMP BETWEEN 0.41-0.98IN. THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT.

👍 AUTO LOCK, NO MORE FALL :This gravity slide-in car phone holder creatively features the Auto-lock arm-slots that stretch on the side can auto adjust to hold phone more firmly without fears of bumps, Special curve of arms fit phone better. The phone was all-round protected by silicone rubber on the inside clamps. NOTE:MAXIMUM THICKNESS OF DEVICE IS 14MM (0.5IN).

👍 UNIVERSAL COMPATIBILITY: This universal car cell phone holder will firmly hold all the smart phones (4-7in) even with thicker case (≤14mm) compatible with iPhone 13 12 pro max/ 11 pro max/XR/X/8/7/6/5, Note 20 10/ Galaxy S10+/ S9/ S8 /S7 /S6 and more. NOTE:WE RECOMMEND USING THE SMALLER PHONE(＜4.7inch) WITH PHONE CASE

👍 NO BLOCK VENT & SAFER DRIVING: This car vent phone mount with folding back structure is very neat and keep it small when not in use, only 1/2 card size and 3 inches away from the vent to still allow air flow. You can have a wider sight and adjust this gravity car phone holder up/down or left/right. NOTE: THE HORIZONTAL MODE IS NOT SUPPORTED.