The Best Automotive Replacement Engine Computers of 2023

Just plug into the OBDII port under the dash and drive

Compatible with GM vehicles built from 2005 to current that feature Active Fuel Management (AFM) and 2019 and newer vehicles feature Dynamic Fuel Management (DFM)

Eliminates hesitation on acceleration and annoying exhaust buzz caused by AFM activation

Enables vehicles with AFM/DFM to stay in V8 mode at all times without reprogramming or re-flashing the vehicle's onboard computer (ECU)

Shut off Auto Start/Stop Feature

Intel Iris Pro Graphics

2.7 GHz Quad-Core Intel Core i5 Processor (Turbo Boost up to 3.2 GHz) with 6MB L3 cache

21.5-inch (Diagonal) LED-backlit Display with IPS Technology; 1920-by-1080 Resolution

1TB Hard Drive, 8 GB (Two 4 GB) of 1600MHz DDR3 Memory

This Certified Refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear, by a specialized third-party seller approved by Amazon. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer

Ignition Coils are engineered for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast and easy installation with superior performance and reliability. Designed and manufactured to operate reliably under all operating conditions and throughout the entire engine speed range for peak engine spark performance

Ignition Coils generate the spark for your vehicle's engine. However, ignition coils would fail due to age, overuse, or simply manufacture defects. A failing ignition coil may result in misfires, rough idle, reduced fuel efficiency, and the appearance of the check engine light. Therefore, it is important to replace your ignition coils as soon as your car starts showing these symptoms to improve the efficiency and drivability of your vehicle

Compatible with Ford Mercury Mazda 2001-2008 Escape; 2005-2007 Five Hundred; 2005-2007 Freestyle; 2000-2005 Taurus; 2005-2008 Mariner; 2005-2007 Montego; 2000-2004 Sable; 2001-2011 Tribute. Compatible with V6 3.0L engine; Compatible with Ford Mercury Mazda 01 02 03 04 05 06 07 08

Part Numbers Compatible with 1L8212029AB, 1L8U12A366AA1L8Z12029AA, 52-1787, IC386, 1L82-12029-AB, 1L8E-12A366-AC, 1L8U-12A366-AA, 5C1617, AJ0318100, AJ0918100, C1561, XS2Z12029AAAJ0318100a, AJ03-18-100, AJ0318100B, AJ0918100, AJC118100, FD495, XS2Z12029AA, 1L8Z-12029-AA, 1L8Z-12029-AB XS2Z-12029-AA, DG-500, FD502, DG513, 5C1449, L8E12A366AB, 1L8Z12029AB, DG539, DG-513, 5C1449, AJ0318100, 8M2E-12A366-AA, C1458, E261, E264, AJ09-18-100, FD-495, FD-502

1-Year Warranty – Please do not hesitate to contact us for replacement. The number of ignition coils in the car depends on the car engine, model, and year. Do not assume all vehicles are the same. Please enter your vehicle in your Amazon Garage above to see if this part is compatible with your vehicle

As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit

Tested with automated, computerized equipment or bench-tested, depending on application, to ensure functionality

100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life

On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements

Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%

On-car vehicle validation testing ensures product fits and functions properly

OE components with high failure rates are 100% replaced

All electronic modules are 100% tested to ensure they meet OE requirements for the application

Advanced robotic equipment ensures precision made units and consistent high quality with every part

Every unit is 100% tested to ensure quality and reliability

Ideal replacement - this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models

Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking

Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer

Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).

6 different Push pin rivet for many brand vehicles.

Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.

Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.

PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

TURN OFF CHECK ENGINE LIGHT: MS300 check engine code reader can read, clear generic, manufacturer-specific and pending codes. It enables you to figure out why CEL is on like a pro and turn off check engine light instantly after proper repair.

MECHANIC APPROVED: MS300 OBD2 scanner works with most OBDII compliant(OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM, and CAN) sedans, SUVs and light trucks post-1996 for US cars, post-2000 for EU-based and Asian cars.

DIAGNOSE IN SECONDS: MS300 auto code reader features easy to use 2 button design to read, clear DTCs to help home mechanics locate car problems fast. With an intuitive interface and easy-to-read backlit screen, this diagnostic code reader is easy to use.

SMOG CHECK: MS300 car code reader retrieves I/M Readiness status to check emission-related systems like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP to help your vehicle ready pass the annual smog check.

NO BATTERY NEEDED: MS300 OBDII scan tool communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly- no battery needed. Please follow the correct usage order: Engine off- Plug MS300 in- Turn Ignition On.

RETRIEVE VIN NUMBER: MS300 engine code readers can retrieve VIN (Vehicle Identification Number) on 2002 and newer vehicles supporting Mode 9 for quick vehicle identification and cut time spent locating the cause why the check engine light is on.

Retrieves generic and manufacturer specific Diagnostic Trouble Codes (DTC), includes definitions lookup software on CD and displays DTC definitions on screen

Features an easy-to-read backlit LCD screen, multilingual menu and DTC definitions and standard 16-pin OBD-II connector--no additional cables are needed

Retrieves VIN (Vehicle Identification No) on 2002 and newer vehicles that support Mode 9

Supports the CAN (Controller Area Network) protols and all other current OBD-II protocols

Works with most OBD-II compliant U.S., European and Asian vehicles (OBD-II is standard on all cars sold in U.S. post-1996)

As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit

All modules are fully tested with automated computerized test equipment to ensure functionality and reliable

Complete resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life

On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements

Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent

As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit

Tested with automated, computerized equipment or bench-tested, depending on application, to ensure functionality

Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life

On-car vehicle validation is done to test durability and performance

Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.