The Best Automotive Replacement Fuel Hoses of 2023

Unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E85 and sour gas.

Provides a Constant Working Pressure to 50 psi Regardless of I.D

NOT for Fuel Injected Systems. A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.

Temperature range: -40°F to +257°F, -40°C to +125°C

Made in USA! Clamps included

VP 3044 - Filler Hose

VP 3042 - Replacement Jug Cap

VP 3045 - Replacement Vent Cap

Great way to customize your fuel or water jug

Cut in 10 foot spools.

ID: 6.35mm / 0.25" OD: 11.13mm / .438"

Max working pressure: 250psi.

Operating Temp: -40°F to 212°F

Safety performance: Excellent flame retardant, Outer braided has long service life, excellent inflaming and safer to use, to Ensure reduce the possibility of hose burst.

Upgrade Material: Using high-quality nylon fiber and stainless steel wire materials to replace the ordinary, More Flexible and More Wear-resistant.

Universal Application: Can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel.

Product Specification: inner hose: CPE synthetic rubber;The middle layer: 304 stainless steel wire mesh sleeve;The outer layer: High quality braided nylon,Working Temperature: -40 ℃ to +148.9 ℃; Working Pressure: 518PSI; Burst Pressure: 2070 PSI.

Warming Notes: AN6, Length: 5m/ 16ft, Outside Diameter:0.55inch (14.22mm), Inner Diameter: 0.34inch (8.71mm). Please double check the hose size before bidding, and Professional installation is highly recommended.

Package Dimensions: 6.35 H x 40.64 L x 16.51 W (centimetres)

Country of Origin : China

Fit type: Vehicle Specific

Package Weight: 0.566 kilograms

Nitrile tube that is spiral reinforced for enhanced durability

NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments

Vacuum rating of 24 in/Hg for sizes less than 1?2 in I.D., and 10 in/Hg for sizes 1?2 in to 3?4 in I.D. at ambient temperatures

Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications

Intended for use with fuels where MTBE concentrations are no greater than 15% by volume

Bringing Your Life Convenience: the fuel filler hose is ideal for assisting the fuel tank in off road and closed race refueling, can be applied for racing cars, garden mowers, pressure washers, motorcycles, ATVs, SUVs and other equipment that need adding flues

Control Flow: the gas can hose comes with practical thread port designs, which can be nicely connected to the tank and the car's nozzle hole, so you can always control when and how fuel flows from your hose kit, avoiding unnecessary spillage when dumping and keeping debris getting into your fuel container

Simple Installation: you only need to link the fuel filler hose with hose cover of the fuel pot (not included in the package) and tighten it, and then aim at the oil outlet at the tank and pour the fuel from an angle, saving your time and energy

Serviceable Material: these race fuel filler hoses are made of quality PVC material, stable and reliable to use, not easy to deform or break, can be kept and applied for a long time, giving you a satisfactory using experience

What You Can Receive: there are 2 pieces of racing fuel filler hoses in the package, measuring about 15 x 0.91 inches, the proper size for most racing gas can or fuel container; The sufficient quantity can efficiently satisfy your needs for daily usage and replacement

Nitrile tube that is spiral reinforced for enhanced durability

NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments

Vacuum rating of 24 in/Hg for sizes less than 1?2 in I.D., and 10 in/Hg for sizes 1?2 in to 3?4 in I.D. at ambient temperatures

Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications

Intended for use with fuels where MTBE concentrations are no greater than 15% by volume

Nitrile tube that is spiral reinforced for enhanced durability

NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments

Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures

Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications

Intended for use with fuels where MTBE concentrations are no greater than 15% by volume

Size: 3/8 inch ID; 5/8" OD; 10 feet Length, black

Use hose barbs and clamps, Ideal for transfer of petroleum products fuel lines for small engines

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

For use in mowers tractors snow blowers dirt bikes and just about all small engines

NBR Rubber Oil & Heat Resistance Fuel Gas Hose Liner, Works With Push-On Hose End Fittings