The Best Automotive Replacement Fuel Inlet Repair Fittings Gaskets of 2023

Flange repair ring 1 piece stainless Steel - 115485

This is highly durable

This is manufactured in United states

Closet ring

Fits under most closet flanges

Stainless Steel

Each ring raises the flange 3/4-Inch off the floor

Closet ring

Fits under most closet flanges

Stainless Steel

Each ring raises the flange 3/4-Inch off the floor

Used to install and tune Edelbrock carburetors

Manufactured from quality materials

Fitting is made of brass

Size of the fitting is 5/8-20 and 3/8 with male threads

Fitting can be rotated 360 degrees and allows to aim your fuel inlet towards the front or rear of the carburetor

Replaces Tecumseh part numbers 33263 and 33861

Fits V80, VM70, VM80, VM100 and HM70

Contains one mower blade

Replaces Tecumseh part numbers 33263 and 33861

Nitrile tube that is spiral reinforced for enhanced durability

NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments

Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures

Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications

Intended for use with fuels where MTBE concentrations are no greater than 15% by volume

1.125 pieces of different sizes rubber grommets, packed in a clear plastic organizer case with snap close lid, portable and easy to store, grommets prevent metal on metal contact for safe pass through connections on firewalls and junctions.

2.Main character: Rubber O-Ring loop, which is Corrosion resistant, high temperature resistant, wear resistant. These o-ring with oil resistant, UV resistant, super-flexible structure and super-thick wall design, can be used in the long term.

3.Mutifuctional tool: Can be used for water seal, oil seal, shaft seal, fixed seal, hole seal, guide ring, dustproof seal, rotary seal.

4.Widely uses: Water pipe, spraying, automobile, chemical pipe, cylinder, decoration, machinery, bearing, valve, doors and windows, electrical appliances, roller, used in automobile, electric appliance, machinery, industry, construction, household and other fields.

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability.

【Size】3/8"Barb x 3/8"Barb x 3/8"Barb, Can be connected with 3/8" Hose ID.

【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose.

【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.

【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc.

Restores carburetor to proper operation

A necessary safety item for preventing fuel leaks

Includes O-ring (where applicable)

Fits carburetors of different styles and with differently sized fuel inlets

Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

Genuine OEM Tecumseh part

Replaces old part number 631470

Fits specific Tecumseh models

Please note: Consult your machine's manual before ordering to ensure correct replacement parts

Meets or exceeds all original equipment specifications

Application-specific design ensures a perfect fit

Engineered for the sealing repair environment

Unsurpassed quality you can trust

The OUTER THREADS on the BULKHEADS are REVERSED, so they tighten backwards. This is because pressure from liquid, on the inside of the fermenter (tank or liquid containment system) would otherwise over time loosen the nut if it were just a standard thread. The left-hand thread will not allow it to loosen even with that pressure.

VARIETY: Not only does the bulk head come in multiple sizes to fit any accessory you might have but we also have the option for food grade quality or industrial strength EPDM quality gaskets.

EASY TO INSTALL: A Weldless Option to add threads to any tank in seconds but you can also easily remove them to clean your equipment hassle free.

MULTI-FUNCTIONAL & LONG LASTING: Product is made with SS304 Industry standard steel. Inner and outer threads on our bulk head allow multiple attachment options. Stainless steel bulkheads are strong and damage resistant giving you a superior choice compared to other brass-based options which can rust or corrode.

OFFERS EXTENSIVE SELECTION (PATENT PENDING): We offer one of the most extensive selection of fittings and gasket grades in the industry. Available in diameters from 1/2” to 1”, every fitting is produced to exact specifications. Gaskets come in Food Grade and EPDM options. In addition, all of our SS304 seals have been tested. PATENT PENDING.