The Best Battery For Resmed Airsense 10 of 2023

This bundle includes everything needed to attach to ResMed S9 CPAP machine. Package includes: Pilot-24 Lite, Output Cable for ResMed AirSense 10, Output Cable for ResMed AirMini, AC Adapter Cable for ResMed AirMini, Fabric Carry Case, Product Manual and Quick Start Guide. DOES NOT INCLUDE A POWER ADAPTER. (The Pilot-24 Lite can be charged directly with AC power cord/adapters of Resmed S9, ResMed AirSense 10, ResMed AirMini.

New in 2018 - the Medistrom Pilot-24Lite! A revolutionary small Uninterruptible Power Supply (Backup Battery) for various 24V PAP devices. Ensures that your devices seamlessly continue to receive power even during a power outage.

Compatible with most CPAP, APAP, and some BiPAP devices on the following platforms: ResMed S9, ResMed AirSense 10, ResMed AirMini, *3B Medical Luna, *Philips Respironics DreamStation Go Travel PAP and *Apex Medical iCH. NOT COMPATIBLE WITH VENTILATOR PAP DEVICES. (*cable kits sold separately).

Features a built-in LED Flashlight and USB Port for charging portable devices such as smart phones, tablets, MP3 players, cameras etc.

Can be used as a portable, standalone power source. Take it travelling and use it to power your compatible PAP device when the mains power isn't available. Provides 1-2 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief all disabled. Will provide approximately 19,000mAh for your handheld electronic devices.

💎【DC Battery Backup for CPAP Users】: CPAP battery backup (K6) is specially designed for CPAP/BiPAP devices such as Airsense 10/Aircurve 10/Resmed S9/Dreamstation/System One/HDM Z1/Transcend Mini/Resmed Airmini. Huge capacity 337Wh/93600mAh ensure you still get several nights charge with this CPAP Battery Pack even you are out for tent camping or you're stuck in a power outage, Perfect power companion for outdoor camping, road trip any emergency power shortage.

💎【Multi 12V/24V Outputs for Various CPAP】: This battery backup is widely compatible with 90% CPAP machine.It has three kinds of outputs: 1) 1* DC24V/4A is compatible with Resmed airsense 10 supplies/Aircurve 10/ S9 and Airmini(Note:(cable for Airmini is not included,inquiry seller to buy); 2) 2* DC12V/5A is compatible with Philip Dreamstation/REMstar System One/HDM Z1/,etc; 3) 4*USB 5V/2.1A for smartphone/tablet and other USB-charged devices.

💎【AC/Solar/Car Recharge】:1)The CPAP backup battery can be fully recharged in 6-7 hours from wall outlet; 2) The CPAP Power Bank is full recharged from solar panel for 8 hours (40W,not included); 3) The K6 CPAP battery pack can be recharged by car(Tip:Need DC to AC Car Power Inverter ,Car inverter is not included).

💎【Portable & Powerful】:With huge capacity (336.96Wh/93600mAh),The CPAP Battery backup is only 5LBS,9.6*9.1*2.6 inch,Super Handy Compared with AC 110V power station.The DC power bank has much higher efficiency & less power loss than AC power station.It can power your CPAP for more than 40-50 hours without humidifier & heater on. Plenty of Power but lighter weight, same capacity but longer lasting time, it is the best choice for power backup during sudden power outage or outdoor power supplement.

💎【Safety Guaranteed】: the CPAP battery backup(K6) built in high quality Samsung battery cell to ensure its stability. Battery management system(BMS) protect from over/low-voltage, high/low temperature,overcurrent/shortcircuit and more, ensuring complete protection for you and your devices.

KFD products are CE / FCC / RoHS certified, tested by the manufacturer to match and / or exceed the OEM specifications

Warranty: 30 Days Free Exchange /36 Months Warranty; ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠️❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V.

Input: DC 12V-24V~12A Max Output: 24V 3.75A 90W;Connector Size:Check Photo; ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A; When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work.

Compatible With Resmed S10 Series ResMed Airsense 10 Air sense S10 AirCurve 10 Series CPAP and BiPAP Machines; ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier; Resmed Model: R270-7468 R2707468 IP21 R370-7296 R3707296 DA90D24 37006 370006 IP22

Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W; ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier ; ResMed Air Sense 10 Autoset Model#1104485 & ResMed 90w AC Adapter IP22 Model#370001 & REF Model NO. 370006 R370-7407 R3707407 DA-90F24

World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty.

UpBright New Global 24V 3.75A 90W AC / DC Adapter Compatible with ResMed Airsense 10 Air sense S10 AirCurve 10 Series CPAP and BiPAP Machines 24VDC 90 Watt 90W OEM Original Genuine Resmed S10 370001 IP22 1104485 24VDC 3.75A DC24V 24.0V 90 Watts Power Supply Cord Cable Battery Charger Mains PSU ⚠️!!! (✅w/ OD: 7.4mm Round Tip. ❌NOT 3-Prong Connector. Please Check For Compatibility With Your Unit. Thanks.)

Compatible with: ResMed Airsense 10 Series: AirSense 10 AirSense10 Air Sense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 Auto Set for Her CPAP Machine with HumidAir Heated Humidifier

Compatible with: Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W; ResMed AirCurve 10 Series CPAP and BiPAP machine: Airsense 10 Air sense S10 AirCurve 10 S Air Curve 10S S10 BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier; ResMed Air Sense 10 Autoset Model#1104485 RESMED AIRSENSE S10 CPAP 37203 & ResMed 90w AC Adapter IP22 Model#370001 24VDC 90 Watt 24.0V 3750mA 90 W 24 VDC 3.75 A Power Supply

Compatible with: Medistrom Inc. Pilot-24 Lite Model: 645759689818 P24MPLBP1 Pilot-24Lite Pilot24 Lite 5722 CPAP Portable Battery & Backup Power Supply (✅for ResMed AirSense 10 AirMini) 24V 2.75A - 3.75A Power Supply Charger

HZPOWEN products are CE / FCC / RoHS certified, tested by the manufacturer to match and / or exceed the OEM specifications.

Input: 100-240VAC 50/60Hz; Output: 24V 3.75A 90W

90W AC DC Adapter for Resmed S10 Series ResMed CPAP and BiPAP Machines

Service: 30 Days Money Back Guarantee and one year warranty. Please contact us with any questions or concerns.

⚠️⚠️⚠❤Attention: ⚠️⚠️⚠❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V.

⚠️⚠️⚠❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A; When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work.

Input DC: 12V-24V~12A Max Output:24V 3.75A 90W

Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier; Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W; ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier

Introducing the new Medistrom Pilot-24 Lite! A revolutionary small Uninterruptible Power Supply (Backup Battery) for various 24V PAP devices. Ensures that your devices seamlessly continue to receive power even during a power outage.

Compatible with most CPAP, APAP, and some BiPAP devices on the following platforms: ResMed AirSense 10, ResMed AirMini, *ResMed S9, *3B Medical Luna, *DreamStation Go Travel PAP and *Apex Medical iCH. NOT COMPATIBLE WITH VENTILATOR PAP DEVICES. (*cable kits sold separately)

Features a built-in LED Flashlight and USB Port for charging portable devices such as smart phones, tablets, MP3 players, cameras etc.

Can be used as a portable, standalone power source. Take it travelling and use it to power your compatible PAP device when the mains power isn't available. Provides 1-2 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief all disabled. Will provide approximately 19,000mAh for your handheld electronic devices.

Package includes: Pilot-24 Lite, Output Cable for ResMed AirSense 10, Output Cable for ResMed AirMini, AC Adapter Cable for ResMed AirMini, Fabric Carry Case, Product Manual and Quick Start Guide. DOES NOT INCLUDE A POWER ADAPTER. (Out of the box, the Pilot-24 Lite can be charged directly with the ResMed AirSense 10 AC Power Adapter or ResMed AirMini AC Power Adapter with the use of the AC Adapter Cable for ResMed AirMini.

Nicer-S products are CE / FCC / RoHS certified, tested by the manufacturer to match and / or exceed the OEM specifications

Compatible models: Resmed S10 Series, ResMed Airsense 10 Air Sense S10 AirCurve 10 Series CPAP and BiPAP Machines

Worldwide Input voltage: AC 100~240V 50~60Hz；Output: DC 24V 3.75A

If you are not satisfied with the product,You can always get in touch with us,We will refund the whole money or send a new as a replacement to you.