The Best Benchtop Sander of 2023

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt

Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM

The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke

Onboard storage maintains organization of all accessories and sandpapers

Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM

Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor

Attach the dust collector of your choice to the onboard dust port to minimize clean-up

VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.

LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.

EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.

POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.

PORTABILITY: Built-in handles make machine relocation easier.

Motor: 1/2 HP, 120V, single-phase, 3600 RPM

Belt size: 4" x 36"

Disc size: 6"

Table size: 6-1/4" x 9"

Cast-iron base

Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc

Belt tilts anywhere from 0 to 90 degrees

Sturdy cast iron base prevents any heavy vibrations

4.3 Amp motor provides up to 3600 RPM

Tension release lever provides for simple changes between sandpaper grits

Multi-functional Use - With a powerful motor, it can be used for small & large sanding operations on various materials. It can intricate contour sanding and shaping to fast stock removal. Belt/Disc Sander is a two-in-one sanding station. DIY woodworkers can use the disk for exacting edge work and the belt for flattening surfaces, creating contours and smoothing inside curves

Adjustable Table Top & Belt Angle - Set the 4" by 36" belt to the horizontal position, the vertical position, or anywhere in-between. With the beveling table top, sanding at an angle is easy and convenient

Two-in-One Sanding Station - Belt and disc sanding allows the user to sand a variety of lengths and angles. The adjustable tabletop and belt angle let you sand up to 90 degrees. Sand miter angles with the miter gauge

Dust Collection Port - Our disc sander is equipped with a dust collection port, which can minimize clean-up of saw dust and debris. It can keep your work environment more clean

Tool-Free Belt Changes - Station is able to change between sanding belts with ease by simply releasing the tension adjustment lever found on the side of the machine. Belt tracking will stay secure with tension spring adjustment.

Sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change damage belt like before

Motor direct-drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards

The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & track control. To ensure a better experience, we suggest matching with our Y-Fitting Hose

Sturdy cast aluminum base with rubber foot prevents vibrations. Side Al table can tilt & fix work on both disc & belt

Two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc. Angle adjustable work table with miter gauge used on the sanding disc

5-3/4 inch round cast aluminum table tilts up to 60 degress for bevel sanding

Uses 1 inch wide x 30 inch long sanding belts, Removable belt support platen for finishing intricate or curved work

Belt tracking and tension adjustment keeps belts on rollers and makes belt changes easy

Heavy duty metal frame with outlets for attaching standard vacuum cleaner hoses

1/3hp, 120v AC quiet-running induction motor

4.3 Amp Induction Motor for Quiet, Smooth Performance

Quick-Release Belt Change System

Belt Tracking Knob for Easy Belt Adjustment

Heavy Cast-Iron Base with Pre-Drilled Holes

Includes: (1) 80 Grit 4'x36" Sanding Belt, (1) 80 Grit

CALIFORNIA PROPOSITION 65 WARNING: Cancer and Reproductive Harm

[HORIZONTAL & VERTICAL SANDING] The spacious 4” x 36” belt platform raises and lowers from 0-90° to accommodate almost any project

[BEVEL EDGES] The sanding table adjusts from 0-45° for smoothing out beveled edges—you’ll have the nicest picture frames in the business

[HEAVY INDUCTION MOTOR] Powerful 4.3-amp motor provides plenty of power to sand down all your woodworking projects

[EASY BELT CHANGES] Quick-release tension lever lets you easily change out sandpaper grits for different projects

[SAFETY SWITCH] Prevents accidental starts so you can confidently leave your shop when you’re done for the day and not have to worry

[WHAT’S INCLUDED] Comes with: 1pc hex key, 1pc miter gauge, 1pc sanding disc, and 1pc sanding belt