The Best Body Repair Paint Curing Systems of 2023

1500 watts of curing power over a 2 x 3 coverage area - ideal for small area repairs

Heavy-duty stand adjusts to over 6 high for curing hoods and roof Lines

With conveniently located on/off switch

Fit Type: Universal Fit

It uses gold-coated short-wave tubes and gold-coated reflectors with 97% high reflectivity and strong antioxidation

Powerful penetration directly into the inner layer of paint. Completely dries two-pack paints within 15 minutes and polyester putty in 5 minutes

Portable design; convenient for curing feather edges, small spots or drying in hard to reach areas. Switch beside the handle for convenient starting and shutting down

Can be used to soften trim mouldings when replacing windscreens or removing strips. Heat up aluminum to repair aluminum-body vehicles, pull a dent, or remove

Input voltage (50/60Hz), 110V ×1Ph, life span up to 6000 hours

CURING AREA------This paint baking lamp can solidify 30*15cm (11.8*5.9 in), and the working temperature can reach 60-80¡ãC (140-176¡ãF). Equipped with a powerful 1000W shortwave infrared lamp, which can make heat flow back through conduction coating.

HANDEL DESIGN------The curing lamp is light and handy, can be easily controlled manually, and has great flexibility and convenience. The heating process is clean, without hot air and secondary pollution.¨It is recommended to use about 0-10 minutes each time

INFRARED SHORT WAVE------Infrared shortwave adopts quartz halogen infrared tube, high luminous efficiency, strong penetrability, less visible light, low glare; heating directly from the inside, shortening the curing time, and high working efficiency

HEAT DISSIPATION PERFORMANCE------This paint lamp is made of aluminum alloy, the front uses aluminum alloy mesh, and the back uses aluminum alloy sheet with countless small holes, which greatly enhances the heat dissipation function and effectively improves the service life

WIDELY APPLICATION------Infrared curing lamps are widely used in car spray booths, partial paint drying, putty drying, and car spray booths. It is an ideal tool for on-site repair, engine drying, strip removal, and drying. And we are the production factory, if you need other models of machines or if you have any operational problems, please contact us in time .

Efficient Far Infrared Heating: Adopted the technology of far-infrared radiation heating, heating speed of this infrared lamp cure time is 60% to 80% faster, and it only heats objects within its infrared range, efficiently utilizes the energy. Its aluminum alloy frame and 304 bright stainless lamp reflector are sturdy and durable.

Large Drying Area & Automatic Temper Monitor: This electric paint dryer lamp can baking an area about 80x80 cm/3.1x3.1inch, and the working temperature is adjustable range from 104-167 ℉ (60-70℃). Fitted with the powerful 2000W short wave infrared lamps to let heat pass back through the coating via conduction.

Security Assurance & Environment Protection: Infrared paint removal has automatic overload protection for security assurance. And the infratech heaters release no hot air and without secondary pollution, which is more friendly to the environment. The stand with four wheels can move flexibly in drying any part of the objects, more convenient for auto paint drying.

Easy Installation & Operation: Our heater body suit equipped with rotating lamp housing and stable adjustable metal tube construction, ball-bearing rollers with the parking brake, it is very convenient to assemble, use and replace. Working distance of this baking heater is 60-80 cm. Input Voltage 110-120V. With 0.1 - 1.7 M lifting height.

Various Application: Our infratech curing lamps are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, and it is the ideal paint tool for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying.

2 * 1000 Watts of shortwave infrared

Speeds cure time 60% to 80% faster. 60-70 。C

60 minutes timer with selectable 2 minute half-power purge timer

110 voltage

Adjusts to suit virtually any job with 0% to 100% solid state power control

【Shortwave Infrared Heat Lamp】 Shortwave infrared has high luminous efficiency and strong penetrating power.Anti-interference. High thermal efficiency penetrates the paint layer, drying from the inside out, Therefore, the surface gloss of the paint is high and the coating adhesion is strong.Greatly reduce wrinkles and tears and avoiding rework.

【DESIGN WITH REFLECTOR】The interior uses a specially designed reflector with high reflectivity, which makes the heat distribution more uniform and increase curing area ,shortens the curing time; Shortwave infrared tube with high luminous efficiency, strong drying ability

【HIGH HEAT DISSIPATION PERFORMANCE】The infrared paint lamp is made of aluminum alloy, the front uses aluminum alloy mesh, and the back uses aluminum alloy sheet with countless small holes, which greatly enhances the heat dissipation function and effectively improves the service life.

【EASY OPERATION】The infrared paint curing lamp equipped with rotating lamp housing and stable adjustable metal tube construction, it is very convenient and safe.

【VARIOUS APPLICATION】The infrared baking lamps are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, and it is the ideal paint tool for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying.

✨【Curing Area】This paint baking lamp can cure 65*50cm , and the working temperature can reach 60-130°C (140-206°F). Equipped with a powerful 2000W shortwave infrared lamp, which can make heat flow back through conduction coating.

✨【Timing Function】0-90 minutes intelligent timing function, automatically stop curing and heating at that time, which can effectively avoid curing and heating for too long and causing damage (set the time as needed)

✨【Infrared Shortwave】Infrared shortwave adopts quartz halogen infrared tube, high luminous efficiency, strong penetrability, less visible light, low glare; heating directly from the inside, shortening the curing time, and high working efficiency

✨【Heat Dissipation Performance】It adopts anti-corrosion aluminum alloy shell, metal mesh cover and 2 metal side covers with cooling hole design. It is more durable than plastic shell at high temperature and improves the heat dissipation efficiency to avoid high temperature damage.

✨【Widely Application】Infrared curing lamps are widely used in car spray booths, partial paint drying, putty drying, and car spray booths. It is an ideal tool for on-site repair, engine drying, strip removal, and drying. And we are the production factory, if you need other models of machines or if you have any operational problems, please contact us in time

6 * 1000 Watts of shortwave infrared, 220-230V, Speeds cure time 60% to 80% faster, Adjusts to suit virtually any job with 0% to 100% solid state power control

0.16 - 2.2 M lifting height can work in the top of station wagon, New Iridium enhanced quartz halogen element puts more energy into the work and less into visible light, Curing Area: 71" * 40"

90 minutes timer with selectable 2 minute half-power purge timer, Element puts more energy into the work and less into visible light, Low light, low glare also improves shop safety

Industry most versatile stand even lets you cure the top of pickups, Large and wide chassis can horizontally enter the buttom of the vehicle through the tire, Red color coat, WALL PLUG NOT INCLUDED

Efficient Far Infrared Heating: Has adopted the technology of far-infrared radiation heating, heating speed of this infrared lamp cure time is 60% to 80% faster, and it only heats objects within its infrared range, efficiently utilizes the energy. Made of metal structure, durable and sturdy.

Large Drying Area & Automatic Temper Monitor: This electric paint dryer lamp can baking an area about 120x100 sq.cm/47.2x39.3 sq.inch, and the working temperature is adjustable range from 104-212 ℉(40-100 ℃).

High-Security: Lamp power 3000W, 60Hz. Besides the automatic security overload protection ensures the security. This heater lamp release no hot air and secondary pollution.

Easy Installation & Operation: This heater body suit equipped with rotating lamp housing and stable adjustable metal tube construction, ball-bearing rollers with the parking brake, it is very convenient and safe.

Various Application: Our infratech-heaters are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, the heater, printing drying machine, and various drying equipment, furniture paint, and other fields.

Efficient Far Infrared Heating: Has adopted the technology of far-infrared radiation heating, heating speed of this infrared lamp cure time is 60% to 80% faster, and it only heats objects within its infrared range, efficiently utilizes the energy. Made of metal structure, durable and sturdy.

Large Drying Area & Automatic Temper Monitor: This electric paint dryer lamp can baking an area about 120x100 sq.cm/47.2x39.3 sq.inch, and the working temperature is adjustable range from 104-212 ℉(40-100 ℃).

Security Assurance: Lamp power 3000W, 60Hz. Besides the automatic security overload protection is for security assurance. This heater lamp release no hot air and secondary pollution.

Easy Installation & Operation: This heater body suit equipped with rotating lamp housing and stable adjustable metal tube construction, ball-bearing rollers with the parking brake, it is very convenient and secure.

Various Application: Our infratech-heaters are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, the heater, printing drying machine, and various drying equipment, furniture paint, and other fields.