The Best Bonded Angle Grinder Wheels of 2023

【50 PACK】This is for a pack of 50 pieces of our cutting wheels.Outer diameter:4.5inch inside diameter:7/8 inch, operating up to 13,300 RPM. optimized for 4.5"angle grinders.

【MATERIAL】Proprietary aluminum oxide grain for long life and fast cutting.double fiberglass mesh reinforced for further safety and durability.

【PERFORMANCE】Thin 0.045" cutting wheel design for fast burr free cutting. Perfectly compatible with all 4-1/2 angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S.

【APPLICATION】Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and other ferrous metals.

【SAFETY TIPS】Please use all necessary protective gear when you use these cutting discs.

VALUE PACK: 40 60 80 120 grit Assorted, 4-1/2 Inch Diameter, 7/8 Inch Arbor, Type #27, 13300RPM maximum speed

HIGH PERFORMANCE: Premium resin-bonded aluminum oxide abrasive produces high performance: durable, good abrasion resistance, anti-static and anti-clogging

Fiberglass backing providing durability and reinforcement

Assorted grit flap discs satisfying all your blending, sanding and finishing requirements from coarse to fine

Widely used for rust, paint, ferrous metals, stainless steel, non-ferrous metals, wood and plastics; Fits most 4.5” Angle Grinders, such as DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more

Size: Diameter is 4-1/2“, Arbor is 7/8”, the flap disc is standard size and suitable for most air and electric grinders.

Specification: Type #27, the grinder sanding discs are better for smoothing and blending surfaces. Maximum speed 13300 revolutions per minute (RPM), the wheels perform well.

Package contains: 40/60/80/120 grit angle grinder sanding discs, 10 x 40 grit, 5 x 60 grit, 3 x 80 grit, 2 x 120 grit, the combination better matches your requirement.

Fiberglass backing: Fiberglass backing plate absorbs vibrations and reduces smear during use. It provides durability and reinforcement.

Application: These grinding discs are effective for smoothing, blending, finishing surfaces or contours. It is available for paint, stainless steel, wood, plastics, ferrous and non-ferrous metals. The abrasive wheels fit for DEWALT DCG414B, DWE402, Bosch 1375A, Makita 9557PBX1, Black & Decker BDEG400, G950 and PORTER-CABLE PC60TAG, PCE810 etc.

🛠️【PERFECT SIZE】Perfectly compatible with all 4-1/2 inch(115mm) angle grinders with 7/8 inch(22.2mm) arbor. Thickness:0.045 inch(1.2mm). Operating up to 13,300 RPM.

⚙️【 PRECISE AND QUICKLY】0.045 inch ultra thin design for fast burr free and precise cutting perforamce with minimal material loss.

🦾【SAFETY - AVOID WHEEL SHATTER】Metal cutting discs are made of aluminum oxide grains. More safe than other wheels that may shatter or prematurely wear. Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

🔧【DURABLE】Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting longer, faster and reliably than other wheels that may shatter or prematurely wear.

🔩【MULTIPLE UESES】Cutting discs are designed for hard and continuous use on all metal, fiberglass, iron, plastic, steel and stainless steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing and other ferrous metals for aggressive cutting action.

The package includes: 2 pieces of diamond grinding wheels.Inner diameter : 22mm ( 0.86 Inch)/Diameter of Grinding Wheel: 100mm(4 inch)/Thickness of Grinding Wheel Disc Body: 29mm(1.14 inch)/Thickness of Gear: 7mm(0.28 inch)

4 Inch grinding wheel 12 Segs heavy duty angle grinder wheels, made of high quality of diamond, use long life

The 4” diamond grinding wheel features air holes designed to aid in maintaining and cooling the cutting pattern and reducing wear

Suitable for grinding machines and angle grinders.

Suitable for dry or wet grinding of concrete, granite, stone, marble, tile, masonry and some other construction material to smooth uneven surfaces and remove flashing.

This sanding wheels pack includes 8 flap discs of multiple grit: 40 60 80 120 grit and 6 cutting discs, satisfying your requirements from all your cutting, blending, sanding and finishing requirements

Each Disc is bonded with fiberglass backing to absorb tool vibration and offer additional durability and reinforcement

Zirconia Alumina abrasives feature a superior cut rate and service life to aluminum oxide abrasives; They are durable, aggressive cut, good abrasion resistance, anti-static and anti-clogging

Wide Application: Flap Disc is widely used for rust, paint, ferrous metals, stainless steel, non-ferrous metals, wood and plastics; Thin Cutting Wheel is designed for fast burr free cutting, quickly and effortlessly cutting through All Metal, Steel and Stainless Steel

4-1/2" Diameter with 7/8" Arbor, 13300RPM maximum speed, fits most 4.5 Inch Angle Grinder, such as DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more

✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and stainless steel.

✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting in metal and stainless with safety and longer service life.

✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr free cutting with minimal material loss, make cutting project more precise and efficient.

✅ Great Performance: Perfectly compatible with all 4-1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,000 RPM and 80M/S.

✅ Versatile Applications: Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and all other ferrous metals.

[Diamond technology] 1 equals 100, EZARC diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels.

[All in 1 Metal Solution] Ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal with over 100X longer life than bonded cutoff wheels in metal cutting applications.

[Avoid Injury] Solid steel wheel body greatly reduces risk of shatter and injury for added safety, diamond cutting edge is 100% contaminant-free, it does not wear down like bonded abrasives, reducing dust particles for a cleaner work station.

[Industrial Quality] Quality Assured accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.

[Accurate Cutting] Maintains original wheel diameter throughout the life of the blade for better control and precision cutting.

[Diamond technology] 1 equals 100, EZARC diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels.

[All in 1 Metal Solution] Ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal with over 100X longer life than bonded cutoff wheels in metal cutting applications.

[Avoid Injury] Solid steel wheel body greatly reduces risk of shatter and injury for added safety, diamond cutting edge is 100% contaminant-free, it does not wear down like bonded abrasives, reducing dust particles for a cleaner work station.

[Industrial Quality] Quality Assured accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.

[Accurate Cutting] Maintains original wheel diameter throughout the life of the blade for better control and precision cutting.

3M Precision-shaped grain engineered to cut faster than competitive ceramic products, offering significant productivity gains

Triangular shaped ceramic grain wears evenly, runs cool, and optimizes mineral breakdown, for extra-long life

Reduces changeouts and downtime in robotic and pressure-assisted applications

Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys

Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.Must be used with ANSI-approved guard that fits the size of the wheel