The Best Brazing Rods of 2023

REPAIRS: With rods twice as long as the competition, Alumaloy repairs or fabricates virtually anything made of aluminum, pot metal, or galvanized steel. Use something as simple as a propane torch on up. No Flux needed! You can repair boats, props, storm doors, gutters, antiques, tools, condensers, molds, rims, air conditioning lines, refrigeration coils, bell housing, pontoons, transmission cases, and so much more.

EASY TO USE: Alumaloy is as EASY as 1-2-3. Simply clean the base metal, heat the base metal, NOT THE Alumaloy ROD, repair your way into hundreds of dollars of savings. Please refer to instructional video.

NO WORRYING: Alumaloy melts at 728 degrees Fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion. Alumaloy even repairs pot metal; one of the most difficult non ferrous metals in the world to repair!

PERMANENT: Alumaloy is specially formulated to make strong permanent repairs that can last a lifetime. Specs include: Tensile Strength lbs/ sq.in 39,000, Compression Str.lb/sq.in 60,000, shelf life is indefinite. Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Each rod is approximately 1/8" x 18" long.

MADE IN THE USA: Alumaloy is an environmentally friendly product. Giving you the ability to repair more and throw out less. Saving money and the planet at the same time. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Alumaloy is proudly made in the United States of America!

Bronze flux coated brazing/welding rods ideal for everyday repairing of steels, cast iron

Contains 12-inch rods

Tensile strength: 60, 000 PSI

Working temp: 1, 620-degree Fahrenheit

Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.

Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.

Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.

No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.

Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.

Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up

Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings

Balanced zinc and copper alloy

Flux is required

Melting point is 1620 degrees Fahrenheit

Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F.

Each 0.5 lb tube contains 19 sticks of 14" brazing rods.

Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F.

Enhanced metallicity: The addition of silver will improve the metallic plasticity, increase the strength and strengthen the toughness of the metal in the welded joint.

Wettability: The addition of silver will improve the wettability of the welded joint, thus allowing perfect filling of every gap.

Package Weight: 0.01 pounds

Brinnell hardness: 100

Working temp: 700-750 degrees

Made in United States

For general purpose brazing rod for repair of most ferrous and or non-ferrous metals

For use with oxy-acetylene torch only

No flux required

For use with lawn equipment, sheet metal, tanks

Includes 4 19.5" brazing rods

0.050 in. x 1/8 in

Rod shape is flat. Solidus temp is 1190 and the Liquidus temp is 1475

Silver 15% Copper 80% Phosphorous 5%

Compatible With Major Brands

One rod, 3 applications. Simple to use with only a propane torch.

Approximately 22 sticks per tube

Stronger than aluminum, harder than mild steel, excellent corrosion resistance

No flux required. Welds zinc base metals, Brazed aluminum

★Package Include: The package includes 20pcs welding rods, which is convenient to replace. Such economical and practical welding rod kit is commonly used for welding copper tubes of air conditioners and refrigerators

★Good Fluidity & Easily Use: Standard processing with 2mm diameter, the low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space

★Extensive Applications: Our round welding rod is suitable for electromechanical instrument industry. And it is mainly used for refrigerator copper tube, air conditioner copper tube welding, copper product welding

★Stable Working Performance: This round phosphor copper welding rod adopt phosphor copper material, has stable working performance and is widely used in various MIG welding equipment

★Regulatory Compliance: This welder rod is entitled with high performance according to strict rule. The rod is designed and manufactured according to international standard, strictly follow factory quality control