The Best Car Enclosed Subwoofer Systems of 2023

High-flow, low-noise port design.

Constructed with 5/8-Inch MDF

11 AWG input terminals

Dimensions: (inches)13.5" x 27.375" x 5.25" (bottom) x 3.25" (top)

SILVER POLYPROPYLENE CONE: This is for rigidity w/ good internal damping, to deliver a more accurate & well-rounded low-end. It is also known for its weather resistance, which is ideal for the temperature extremes common to automobile applications

EXTRA DEEP ALIGNMENT: Car Subwoofer Bandpass Speaker System has a bandpass with an alignment of extra deep bass. It was made with extra deep bass to be able to produce a loud sound that makes you feel the vibrancy and have fun listening in your car

RUBBER EDGE SUSPENSION DESIGN: This speaker system was designed a specially treated black rubber edge suspension, so the only vibrations you’ll be hearing will come from your music. A specially treated rubber surround is also ready for a beating

BANDPASS DESIGN: Bandpass enclosures give you the best of both worlds. The two 10-inch subs are mounted inside a sealed chamber, which then delivers sound to the ported chamber through four specially tuned ports and into your vehicle

1000 WATTS PEAK POWER: This drop-in system is designed to create some serious bass, with monster 1,000 watts of power handling and its bandpass design. As an added bonus, the built-in neon accent lighting gives it an attractive custom look

1,000-watt subwoofer enclosure features two 10-inch subs in a custom bandpass box

Subwoofers feature silver polypropylene cones, rubber surround, and high-temperature aluminum voice coil

Bandpass design with four tuned ports for deep, efficient bass delivery

Built-in neon accent lighting for added visual appeal

Frequency response of 35 Hz to 1 kHz

Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it

Dimensions: 15” x 9. 75” x 3”. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles

: sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality

Built-in MOSFET 200 W max. monaural amplifier

Built-in variable Crossover (50-150Hz).

Low Pass Filter for DVD 5. 1

Compact Hideaway Size (2. 5" Tall)

Perfect for - Saving space, Convertibles, Cargo vehicles, Speaker, and RCA level inputs

Voice Coil Type: Dual Voice

Voice Coil Bobbin: Kapton

Voice Coil Wire: Copper

Damper: Poly Cotton

Gasket: PP

LOUD SUBWOOFER: 4-ohm subwoofer enclosure with 400 watts of RMS power and 800 watts of max power; Dimensions (L x W x H): 10.625 x 16.56 x 10.75 inches

HEAVY-DUTY DESIGN: Durable ABS tube design stands up to heavy use and the elements with an advanced heat management system

EASY MOUNTING SYSTEM: Mount either horizontally or vertically in your vehicle with the included mounting hardware

SPRING-LOADED SPEAKER: Spring-loaded speaker terminals and grilles included

FEATURES: Features integrated CompR woofer and reflex sub; Type: Single truck; RMS power: 400 watts; Peak power: 800 watts; Final impedance: 4 ohms; Sensitivity: 85.7 dB

The Punch P300-10 is a self-contained all-in-one solution featuring a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier

The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x D1 x D2): 13.3” x 18” x 8.9” x 5.9”

Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control included

Closed-loop design ensures optimum performance between woofer, amplifier and enclosure with easy integration in aftermarket or OEM audio systems using RCA or speaker level signals

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system

BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module

LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your car stereo sound system

HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual

LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source

The product is a car subwoofer with excellent tension and unique design. With the support of double ten-inch woofers, you can create a shocking bass sound field for your car.

Tuned by a senior sound engineer, it has strong and elastic low frequency, which makes every note vibrate in your ear.

The two-in-one configuration of the power amplifier and the loudspeaker makes the installation in one step and saves the space inside the car. It has an ultra-thin thickness of 6.7 inches and can be placed in a variety of ways, such as the back of the seat, the bottom of the seat, and the rear trunk.

We provide you with high-quality super-long cables and control wires, so you don't need to buy other accessories.

Our products have been tested strictly and have reliable quality, and we provide you with a 12-month warranty.

The Punch 300-8P is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket system

The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 11.4" x 17.6" x 5.6"

Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch

The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller