The Best Car Mono Amplifiers of 2023

Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse

Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect

Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Specs - Dimensions: 9.1” x 10.4” x 2.3”, Weight: 4.4 lbs.

Warranty - BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality

The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Features: Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Mono Car Amplifier, Metal Bass Remote Included, 1 Ohm: 1000 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (74.1% efficient), 2 Ohm: 600 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (84.5% effic

Peak: 4000 Watts @ 1 Ohm (Only use this power as reference if matching with amps that do not have an RMS rating), High-Speed MOSFET Power Supply, Class D Technology, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry

Phase Control Switch, Full IC-Controlled Protection Circuitry, Adjustable 0-18dB Bass Equalizer, Mute and Delay Soft Start System, Status Mode LED Indicator, Minimum THD at Rated Power: <0.1%

S/N Ratio: >90dB, Under Voltage Protection at 9V, Over Voltage Protection at 16V, Radiation cooling keeps the amp running at high volumes for hours straight, Extruded aluminum heatsink, Frequency Response: 10Hz - 300Hz

Damping Factor: >150 @ 100Hz, Fuse: 40A*3, Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money, Dimensions: (L x W x H) 14" x 8.5" x 2.24", Weight:7.8 lbs

1500W Maximum Power Monoblock Amplifier

Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road

Compactly built so this amplifier can fit perfectly into any trunk

Efficient Class-D amplifier

Variable 12dB crossovers provides control to dial in perfect sound

KickEQ 6dB variable bass boost for those additional low frequencies

Variable 12dB crossovers provides control to dial in perfect sound

24dB subsonic filter for protection from potentially damaging frequencies

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 1000 Watts x 1 Channel <1% THD+N. - 4 Ohm: 600 Watts x 1 Channel <1% THD+N.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 4000 Watts x 1 Channel. - 4 Ohm: 2400 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz.

Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.

Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 100 Amp Maxi Fuse. Dimensions: (W x H x L) 9" x 2.4" x 15.5"

AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.

SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.

INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.

RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.

GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels

HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com