The Best Circular Saw Track System of 2023

CUT ANY ANGLE: BORA Track Clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate

EASY SET UP: Attach the track clamp to the top or bottom of the rail for maximum grip. Easily tighten or adjust the clamp with the speed nut and lock it in place

NON-MARKING GRIP: Each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations

SOLID, SECURE HOLD: The strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose

VERSATILE: Sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power

Plunge-cutting circular saw for cutting solid wood and plywood when paired with the Kreg 62" Guide Track

Powerful 12-amp, 120-volt variable speed motor with load compensation

Safe with fully-shrouded , retracting blade, riving knife, electronic blade brake, and anti-kickback control

Blade-left design is optimized for right-handed users, and provides superior cutting visibility and control

High-capacity cutting with 2 1/8" maximum cut at 90° and 1 1/2" at 45°

Zero clearance TrackSaw(TM) cutting system delivers straight, splinter-free, precise cuts

For use with TrackSaw(TM) dual edged tracks for perfectly straight cuts

Continuous Anti-Kickback mechanism and riving knife prevent kickback when engaged

Straight plunge mechanism for optimal ergonomics

Enclosed low profile guard gives a 90% dust extraction capability

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

Designed to cut a wide range of materials without changing blades

Powerful 15 amp, hi-torque motor accurately cuts with an adjustable 2 - 1/2 inch depth

Includes 40 inch track, ergonomic soft grip handles, dust extraction port & adaptor, and premium 7-1/4 inch blade

0-45˚ bevel tilt with pivot for compatible and precise cutting capabilities

Manufacturers 3 year limited warranty

TRACK SAW PRECISION: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time

100” OF CUTTING CAPACITY: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.

STOP THE GUESSWORK: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.

REDUCE TEAR OUT: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish

CUT ANY ANGLE: Attach the additional two Track Clamps to the Clamp Edge for pro level angle cutting capability

Aluminum guide track for cutting solid wood and plywood with the Kreg Plunge Saw

Versatile track cuts precisely alone or on the Adaptive Cutting System Project Table

Precise zero-offset design aligns track edge with exact cut location

Splinter-free cutting with anti-chip strip that hugs the blade and cutline

Secure positioning using two anti-slip strips that hold track in place without clamps

Standard kit includes everything needed to mount virtually any circular saw 6.25" - 8.25" (Specialty plate for 10"+)

Universal Adapter Plate is machined to precisely fit the double-bevel design of the track

Anti-Chip Strips prevent tear-out on the top surface of your cut, provide line-of-cut indication, and anti-slip capability

Self-aligning dovetail connectors allow easy, hassle-free expansion for longer cuts

CUSTOMER MUST MOUNT ADAPTER PLATE - REQUIRES DRILLING HOLES IN YOUR METAL SAW BASE

Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts

Create 45-degree bevel cuts in boards up to 1-5/8 inches thick

Perfect for ripping boards or for performing internal plunge cuts

Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor

Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps

CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cut

GUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips

EASY SAWING: Take your saw to the material instead of having to take your material to the saw

VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make accurate cuts

BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System

Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels

Simply align the guide Track with your marks to make accurate cuts

Hold track in place without clamps thanks to anti-slip guide strips

Prevent splintering with anti-chip strips that support material during the cut

Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,