The Best Clock Kits of 2023

DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself

Size: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches; Jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel

Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment

Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts

5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect

Good for repairing, replacing or making a clock.

Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Movement total shaft length: 23 mm (29/32 inch), thread length: 15 mm (19/32 inch).

Clock Movement suitable for 9 - 13 mm (23/64 - 1/2 inch) thickness clock panel.

Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm)

Total shaft length: 28 mm (1-1/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel

Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length; Note: please check the size before buying

Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself

Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent

Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm).

Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.

Center of hole hand size: hour hand is approx. 187 mm (7.4 inch); Minute hand is approx. 260 mm (10.2 inch); Second caps is approx. 7 mm (0.28 inch).

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

We Ship same or next day USPS first class mail. DELIVERED in 2-4 Business Days

Tested on over 3,000 Grandfather clocks, Wall clocks as well as mantle clocks over the past 10 years Compleat Oiling kit includes everything you need to clean and re-oil a clock movement without exspensive equipment Including detailed instructions.

The perfect kit for cleaning and servicing clock, Model Trains, Drones or any other machanical items

Perfect for Cuckoo Clocks, Grandfather Clocks, Wall clocks, Mantle clocks and all mechanical clocks

This oil will not gum up, collect dust, eat through lacquors or varnishes. Long lasting, stays were you put it

The Potato Clock uses a pair of ordinary spuds to power a digital clock.

This kit includes a digital clock, wires and prongs; two potatoes are all that's needed to create a working clock.

This kit is ideal for young science enthusiasts, and offers a valuable lesson on the transformative power of green science.

Detailed assembly instructions included.

No batteries required.

Challenge your child's imagination with 4M toys and kits.

4M educational toys cover a wide range of educational subjects and include science kits, arts and crafts kits, robotics kits, and more.

4M offers a wide range of toys and kits to let you build a clock, crochet a placemat, or turn your room into a planetarium--all in the name of making learning fun.

This kit contains a digital clock, and the instructions and everything you need (minus the spuds) to run it

Does not include potatoes

Watch your child's delight and sense of accomplishment with the clock they create

Turn the kids onto the notion of leaving a smaller carbon footprint

No batteries required

Long spindle quartz clock: good handwork DIY clock replacement movement parts with hook, which meet your installation needs

Movement size: total shaft length is 31 mm (1-1/ 5 inch); Thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel

Hand length: total hour hand length is about 86 mm (3.4 inches); Total minute hand length is about 116 mm (4.6 inches); Second caps is about 7 mm (0.3 inches)

Easy to install: the clock movements kits installation is very easily; Long spindle, delicate design and looks elegant, simple, replacement part suit well to different styles clock frame

Compatible clock: applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc.; Suitable for repairing, replacing or making a clock

100 Assorted spring bars

One Jaxa type case opener

12 Bits for the Jaxa type case opener

One Presto type hand remover

2 Watchband link pin removers

Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm).

Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.

Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length.

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.

Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.

DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.

Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.