The Best Desktop Cnc Mill of 2023

Class leading values got even easier to use. Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box. An entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.

Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for immediate shutdown of your machine.

CAD/CAM software to design then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360 and Easel). If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.

Ultra-fine Carbide: This carbide end mill set is made of ultra-fine carbide material with high hardness, high strength, wear resistance, high speed cutting and bending strength

Titanium Coating: The corn milling cutter is coated with Titanium , which provides a smooth finish and reduces corrosion that greatly increases the endurance of the engraving bits

Wide Application: DRILLPRO Titanium coating end mill is widely use for carving, cutting, engraving, milling, slotting, sculpturing in materials, such as PCB, SMT, CNC, mold, plastic fiber, carbon fiber, hardwood and other precision parts

Durable & Economical: The cutting edge of end mill set is sharp, not easy to break and can maintain for a long time. You can use it to improve your work efficiency and save your cost

Cutting Edge Sizes:These spiral router bits include 10 different sizes: 0.8-3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), various sizes can meet all your needs

【Technic Parameters】Working Area: 126mm×88mm×38mm. Frame Size: 281mm×281mm×287.5mm. Control Software: Grblcontrol / Lite.fire. Power Supply: 5A, 24V(110V-240V). Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min. Spindle Chuck: ER11. Stepper Motor: 2-Phase 4-Wire stepper motor(1.3A 0.25N.m).

【Simple Assembly/Use】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive/CD which contains all the files. Please let us know if you need any help.

【Applicable Engraving Material/Shape】CNC 1310 nachine can engrave plastic, wood, acrylic, pvc, pcb and silimar materials , as well as copper, aluminum, and other kinds of soft metal materials. It's able to applicable for carving standard shape materials. Cylinder, curved surface and material of non-standard shape cannot be carved.

【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board has more fuctions such as support spindle PWM speed, limit switch, tool setting. Regarding the meaning of the control board ports, there are related descriptions on the back of the product.

【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.

♞【Upgrade Version CNC3018 Pro Max with offline controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual.

♞【Working area】30x18x4.5cm;Frame size: 42x35x27cm;Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux; Can't support Apple product ; Supporting files:G-code (.nc/.txt/.tape/.gcode)

♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min; Collet: ER11 3.175mm (Can be equipped with 0-7mm); Nema17 42 stepper motor 1.3A/0.25N.m

♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change the spindle to a 3pins module,also can carve the kraft paper, wood, leather(wallet), bamboo.

♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software

Compatible routers include DeWALT 611, Porter-Cable 450, Bosch 1 HP Model PR20 or similar style palm router (sold separately)

Includes SHARK SD110 CNC Machine, two (2) hold-down clamps, carbide V-bit, Vectric VCarve desktop design software, Vector Art 3-D sample pack, and Ready2Control software

Specifications: Table dimensions: 12'' x 18", XYZ travel: 12'' x 13'' x 3'', Overall dimensions: 19-1/2'' W x 20-1/2'' L x 18'' H

Ships fully assembled. Made in USA

【PREMIUM QUALITY】- With the external dimension of 26x24x22cm (10.2"x9.4"x8.7"), frames and fixed parts are made of 2020 aluminum profiles & black injection molding material. Working Travel: 16(X)x10(Y)x4(Z)cm (6.3"x3.9"x1.6").

【EASE OF USE】- According to the instructions, the machine is easy to assemble. Supports windows XP SP3, win7, win8, win10, (32/64) and Linux system.

【CONVENIENT CONTROL】- Simply connect to computers via USB port and controlled by GRBL. An offline controller is also included for easy remote control without computers.

【HIGH PERFORMANCE】- Comes with T8 screw rods driving units, three 42 stepper motors, and a 775 (12-36V)24V spindle motor with rotational speed of 10000r/min.

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.

Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.

Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.

Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

【Working area】 30x18x4.5cm ; Frame size: 40x33x24cm ; Type:USB Port Desktop cnc router;According to the instructions,the machine is easy to assemble.

【Spindle】775 spindle motor (12-36V) 24V: 7000r / min, 36V: 9000r / min ; 【Stepper motor】Fuselage length 34mm,Current 1.33A, 12v.Torque 0.25N/M

【Support System】Windows XP SP3, win7. win 8 (32/64 can be). Linux;

【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items.

【User Manual&Software】Our parcel include a 4G USB flash drive include english user manual & GRBL software

This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly.

It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern.

Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast assembly. A detailed manual will guide you put the enclosure together.

3018-SE is capable to carve and cut different materials such as plywood, MDF, PCB, acrylic and carve on soft metals surface like aluminum. It’s great for home DIY and small business.

The control board is based on open-sourced grbl software. It supports Windows XP/7/8/10, Linux, Mac OS. It requires knowledge to make G-code. Pls contact us for tutorials if you are new to G-code.

Small and beautiful - the accurate mill for lab, optician, jewelry, electronic and model building projects

Supplied with a stable base of cast iron, vertical column and compound table are of treated, high quality aluminum

All axes are play-free and have adjustable slides, headstock, made of die-cast aluminum

Balanced special motor and provides stability even at high operating speeds

Scope of delivery: 1x PROXXON MICRO Mill MF 70 including MICROMOT steel collet set and stepped clamp blocks of steel. Part number: 37110