The Best Desktop Cnc Router of 2023

♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual.

♞【Working area】30x18x4.5cm;Frame size: 42x35x27cm;Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux; Can't support Apple product ; Supporting files:G-code (.nc/.txt/.tape/.gcode)

♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min; Collet: ER11 3.175mm (Can be equipped with 0-7mm); Nema17 42 stepper motor 1.3A/0.25N.m

♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change the spindle to a 3-pins module,also can carve the kraft paper, wood, leather(wallet), bamboo.

♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software

New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. The base height is raised to 4cm for better stability. Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle, no need to modify G-code to ramp up to full speed.

Controller Software: The Genmitsu 3018-PRO uses GRBL, a high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make GRBL an industry standard, so there’s no lack of support and resources available when you get stuck. Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files.

Optional Upgraded Parts: Super Size your 3018 CNC to a 3040 by getting a Genmitsu 3040 Y-Axis Extension Kit (B08P2S3JWP). The 3040 Aluminum Spoilboard (B08VNLP24C) and 3040 MDF Spoilboard (B08WZ8RV3Y) for this extension kit are also available to buy.

Support: Assembly Instructions and User Guide could be found at the Product Guides and Documents Section below. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.

[PREMIUM QUALITY] - With the external dimension of 40x30x24cm (15.7"x11.8"x9.4"), frames and fixed parts are made of 2020 aluminum profiles & black injection molding material. Working Travel: 300(X)x180(Y)x45(Z)mm (11.8"x7.1"x1.8").

[EASE OF USE] - According to the instructions, the machine is easy to assemble. Supports windows XP SP3, win7, win8, win10, (32/64) and Linux system.

[CONVENIENT CONTROL] - Simply connect to computers via USB port and controlled by GRBL. An offline controller is also included for easy remote control without computers.

[HIGH PERFORMANCE] - Comes with T8 screw rods driving units, three 42 stepper motors, and a 775 (12-36V)24V spindle motor with rotational speed of 10000r/min.

[VERSATILE USE] - Used to engrave all types of plastics, soft aluminum, woods, acrylics, PVCs, PCBs, etc.

【Working area】 30x18x4.5cm ; Frame size: 40x33x24cm ; Type:USB Port Desktop cnc router;According to the instructions,the machine is easy to assemble.

【Spindle】775 spindle motor (12-36V) 24V: 7000r / min, 36V: 9000r / min ; 【Stepper motor】Fuselage length 34mm,Current 1.33A, 12v.Torque 0.25N/M

【Support System】Windows XP SP3, win7. win 8 (32/64 can be). Linux;

【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items.

【User Manual&Software】Our parcel include a 4G USB flash drive include english user manual & GRBL software

🛠️【2-IN-1 CNC 3018 Pro】 - Designed for the absolute beginner, this machine is a great tool for starting CNC learning. It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module.

🛠️【Offline Controller】- The offline controller is 1G Capacity. You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.

🛠️【New Control Board】- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty.

🛠️【Versatile】- Capable of cutting all types of plastics, woods, acrylics(Only suitable for spindle milling cutter engraving), PVCs, and PCBs, the MYSWEETY can be used on a wide range of projects and materials.

🛠️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!

【Attentive Quality Service】ONE-YEAR warranty and Lifetime service. Multi-channel contact information has been being available, and a large amount of various materials related to CNC practical operation have been summarized and sorted to ensure that any customer inquiries about CNC machine and operation can be handled quickly and conveniently. Such as: Candle, LaserGRBL, Easel, Fusion360 etc.

【Focus on Precision & Performance】Use stainless steel screws, a full set of high-quality bearing parts and high-precision screw/polished rod to extend the service life of the machine and ensure the engraving effect of the machine. The new shock-absorbing 3D punching spindle clamp effectively relieves the vibration of the high-speed spindle.

【Humanized Design】Equipped with an upgraded GRBL1.1 motherboard.Three new large handwheels can be accurately positioned to eliminate tedious software adjustments.Four bottom rubber feet are shock-absorbing.And non-slip to avoid scratching the desktop, equipped with a 1000RMP silent spindle to protect your ears.Pre-installed X&Z- Axis reduces installation difficulty and saves time.

【Widely Practical Functions】2-in-1 CNC machine, equipped with 775 spindle motor and 5.5 W laser module, and presented LaserGRBL and Candle dual open source software. There are two modes of operation, PC and offline controlling, which can be switched at will. Can be widely used in Windows, Linux systems. Can also use LightBurn, Easel, Inkscape, ArtCAM and other operations and CAM Drawing software to draw G-code files.

【Obviously Preponderance】The new 3018PRO which upgraded completely has a more stable and reasonable mechanical structure, and the spindle holder and bottom bearings are made of premium 3D die-cast plastic for durability. Presented genuine Lasergrbl and Candle, simple operation, comprehensive functions, applicable to CNC entry learning, friendly to novices. Debugging at will, high engraving precision, engraving effect and drawing design highly match. Suitable for a variety of carving materials

This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly.

It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern.

Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast assembly. A detailed manual will guide you put the enclosure together.

3018-SE is capable to carve and cut different materials such as plywood, MDF, PCB, acrylic and carve on soft metals surface like aluminum. It’s great for home DIY and small business.

The control board is based on open-sourced grbl software. It supports Windows XP/7/8/10, Linux, Mac OS. It requires knowledge to make G-code. Pls contact us for tutorials if you are new to G-code.

Class leading values got even easier to use. Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box. An entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.

Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for immediate shutdown of your machine.

CAD/CAM software to design then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360 and Easel). If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.

♞【Upgrade Version 3018 Pro】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers; The CNC3018 PRO machine is very easy to install,stable structure.

♞【Working area】 30x18x4.5cm;Frame size: 40x33x24cm;Type:USB Port mini desktop cnc router【Spindle】 775 spindle motor (12-36V) DC24V:10000r/min【Stepper Motor】Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m

♞【System requirements】 Windows XP SP3,Win 7,Win 8,Win 10 (32/64 can be) Linux; Can't support Apple/Mac product.

♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material,also can work on soft metal like copper,brass,aluminum and other similar metal materials, but can not carve hard metal, jade or other very hard texture of the items.

♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software;