The Best Digital Angle Gauge of 2023

This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level

High visibility reverse contrast display improves visibility in dimly lit work environments

Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces

V-groove edges enable optimal alignment on conduits and pipes for bending and alignment

0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery

0 to 180-Degree range is useful when accounting for kickback in pipe bending applications when bending to 90-Degree or more

Display auto-rotates when upside-down for easy viewing

【Great Accuracy and Consistency】Angle gauge provide an accuracy of ±0.1° and resolution of 0.05°. It works well in measuring or setting angles, checking relative angles, measuring bevel angle of miter saw, automobile test and repair, or used as a digital level.

【Upgraded Angle Gauge with Horizontal Bubble】The digital angle finder with a V-groove magnetic base instead of a flat base, which can be more stably fixed on round pipes and other metal surfaces. And it increases a bubble vial, which can be used to determine the level when there is no battery.

【Versatility - 4 Units of Measurement】Compared to others, our digital angle finder magnetic provides 4 display units, can switch freely from degree(°)，percentage(%), mm/m, in/ft. Besides, with data storage function, "Erro" indicator function, "Zero" switches relative angle etc. Multi practical functions of this angle gauge allow users to be more efficient and make their job easier.

【High-visibility Reversible Display, Easier to Read】Specially designed with high visibility auto-rotating display, which has higher definition digitals. No worrying about hard viewing even with poor eyesight or using in dark areas.

【Wide Application】Widely used in house decoration, building construction, automobile testing and repair, road and bridge slope detection, etc. The protractor is portable and convenient, whether you are a beginner, construction worker, decoration designer, maintenance worker, craftsman or other professionals, Inkuen angle gauge is a great helper and choice for angle measurement and adjustment.

This Is No Ordinary Angle Measuring Tool: You're probably familiar with digital angle gauges but not like this one; It comes with a built in level, large, easy to read, light up LED screen, and buzzer alerts when it’s within ±1° at the horizontal or vertical position (±0.1° at 0° and 90°)

Get Accurate Measurements With Ease: The digital level and angle gauge may be small in size, but it's big on convenience; This angle finder tool measures, sets, angles, and will also tell you if a surface is level; It quickly measures angles from 0 to 360° (4*90°) in ° degrees, % percent, mm/m, IN/FT slope or pitch and has a hold function to freeze the measurement

Blending Convenience With Comfort: The pocket level and angle finder features sturdy V groove aluminum edges, a strong magnetic base, and is water and dust resistant (IP42 rated); When upside down, the LED display auto rotates, so you'll always have a clear view; All of this in a device that fits in your pocket or the storage bag that comes included

Used In Many Commercial & Residential Settings: Turn to this mini digital level angle gauge for straightforward tasks like leveling pictures on a wall and more complex jobs like working with landscape drains, gutters, or measuring pinion angles on a car; This tool is used for woodworking, plumbing, construction, machinery, telecommunications, automotive, and more

Premium Tools That Are Built To Last: Giant Viking tools are known for their affordability, quality and reliability. So reliable, that we back this digital angle cube with a 3-year-replacement-warranty. If it let’s you down, we’ll replace it. No questions asked.

Large backlit digital display shows current angle

Intuitive design makes operation simple while LEDs and digital display provide visual feedback

Audible feedback when target angle is reached

Automatically powers off when not in use for 2 minutes

Low battery indicator

【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory.

【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces.

【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement.

【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes.

【Packing contains】Digital angle gauge*1, 1.5V Alkaline battery*1, storage pouch*1, instruction*1

DUAL FUNCTIONALITY -- this tool can be used as both a bevel gauge and a digital level for carpentry. As a bevel gauge, it measures angles for woodworking. The AccuMASTER is compact, allowing it to fit into tight spots so you can get measurements you need to Perfect your project. It can also be used in welding, fabrication and even automotive tire alignment

EXACT & EASY TO READ -- the AccuMASTER' s bright backlit StayGlow(tm) display will never leave you in the dark. The display features large numbers, making it easy to read. No more eye-balling important measurements — this handy tool gives exact numbers so you can make the most precise of cuts with confidence. It automatically shuts off after 3 minutes of inactivity, plus its improved MEMS sensor further increases battery life so it’s always ready for use, no matter how long it’s been in the tool drawer.

STRONG MAGNETIC BASE -- with its powerful magnetic base, this digital protractor can easily and firmly attach to miter saw, band saw, and table saw blades. You can also use it on fences, tables, and any other metallic surface. Thanks to its strong magnet, you no longer have to worry about holding the tool in place while taking measurements.

CERTIFIED IP54 RATING -- this woodworking tool is IP54 dust and water-resistant so it can be used in any professional woodshop, garage, or backyard shed. This measuring accessory is just what you need to go from a novice woodworker to a master carpenter. No matter your experience level, this tool will help you complete any project.

VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws

TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly

DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant

ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms

Press the ZERO button to calibrate the angle gauge to any reference surface.

Resolution: 0. 1 degrees

use 1 AAA batteries for superior battery life.

Range: +/- 180 degrees

ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction.

SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects.

DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool.

WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery.

GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively.

TWO MEASUREMENT MODES & FOUR UNITS: This equipment displays absolute angles and relative angles in degrees, %, mm/m and IN/FT. Turn on the equipment to directly enter the absolute measurement mode, and press the ZERO button to switch to the relative measurement mode.

EASY TO READ: The upgrade super-large LCD display with backlight and reversible display has black background and the measured value with green light, which can be clearly read in the environment with sufficient light or dark light; The measured value can be automatically turned over and displayed along with the turning over of the equipment, which is easy to read.

CALIBRATION FUNCTION: The equipment has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles. The measuring range is 4×90°; The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so that it can be calibrated by yourself in case of deviation of accuracy caused by various factors. Please refer to the user manual for details of calibration method.

POWERFUL BUILT-IN MAGNETIC BASE and V-GROOVE DESIGN: The powerful built-in magnetic base can be easily and firmly connected to any metal surface, including the most common table saw, which is easy to save time and effort to obtain more accurate measurement results; V-groove design can be easily placed on curved surfaces such as pipes.

MORE FEATURES: Battery power shortage prompt; Audible buzzer (the alarm will be given within the level of ±1°, and the frequency will change with the distance from the horizontal or vertical position); Automatic turn off after 3 minutes without any operation or movement to extend the battery life; The protection bag with a belt loop is attached to protect the equipment surface from wear and you can carry it anytime and anywhere.