The Best Drill Mills of 2023

Product Name : End Mill;Material : HSS

Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"

Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.

End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.

APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.

Package Content : 2 x 1/4 inch End Mill

Top Quality M2 HSS

Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes

Sizes 1, 2, 3, 4 and 5, 60° tip angles.

The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32

All collet chuck are high speed proved,high speed true balance in 15-20K RPM

Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in

Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets

Ideal for milling machine, drilling machine or holder, etc

90° Three edge chamfering cutter

Flutes : Three edge chamfering

Shank : Round handle

Specification : 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm

★Cross travel: 3.12" Longitudinal travel: 2.61"

★ Maximum jaw opening: 2.73"（80mm），Vise Specifications: 3"

★ Hand wheels feature machine-marked 0.1 mm increments for maximum precision 。Adjustment in X direction: 80mm. Adjustment in Y direction: 67mm.

★2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing

★Hand wheel with adjustable scale:A ring=1.5mm

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.

CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16", 3mm=1/8", 4mm=5/32'', 5mm=3/16", 6mm=1/4", 8mm=5/16", 10mm=3/8", 12mm=1/2"

STRONG and DURABLE:The end mill bits are made from Ultra-fine steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.

Precision proxxon engineering for top quality machinery

110 - 120V, 60Hz, 140W (0.1877hp), speeds 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm

The lathe functions as a compound table, with X-Y travel being longitudinal and cross-wise respectively

Three collets of sizes 15/64" - 5/16" and 25/64" (6, 8, 10mm) are included.

Works with 1/2" power drill speeds up quill (knee) operation function as a power feed; Works with 1/2" power drill speeds up quill (knee) operation function as a power feed

Heavy Duty made, hardened steel; Flats cut on shaft for stronger power drill grip

Works with 1/2" power drill speeds up quill (knee) operation function as a power feed

Fits most mill with 5/8" diameter hub

APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency.

U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

MATERIAL: high speed steel, high hardness, good wear resistance and durability.

10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in