The Best Edge Clamps of 2023

3-WAY EDGING CLAMP: This 3-way edging clamp is ideal for your workshop. It features a malleable iron reinforced frame with a black oxide spindle and handle for durable & strong hold & even pressure

ERGONOMIC DESIGN: This clamp is ideal for easy and secure fitting of moldings and trim. It features heavy duty swivel saddles and a throat depth of 2.75"

MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials.

THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches.

SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair.

CUT ANY ANGLE: BORA Track Clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate

EASY SET UP: Attach the track clamp to the top or bottom of the rail for maximum grip. Easily tighten or adjust the clamp with the speed nut and lock it in place

NON-MARKING GRIP: Each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations

SOLID, SECURE HOLD: The strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose

VERSATILE: Sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power

GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill

LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut

MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy

SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts

ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide

100 INCHES OF CUTTING: With your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts

Includes 24-inch & 50-inch WTX Clamp Edges, 50" Extension with connectors, Saw Plate

WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability

Adjustable channel on saw plate fits a wide variety of straight edges up to 3.5” wide

Fits right- and left-handed circular saws

Ruled extrusion allows for easy measurements

Locking handle grabs work surfaces for a secure edge that won't budge

**Replacement set for BORA 543400 4-piece set

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.

Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.

How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.

The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

TRACK SAW PRECISION: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time

100” OF CUTTING CAPACITY: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.

STOP THE GUESSWORK: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.

REDUCE TEAR OUT: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish

CUT ANY ANGLE: Attach the additional two Track Clamps to the Clamp Edge for pro level angle cutting capability

CIRCULAR SAW GUIDE FOR LARGE SHEETS: The BORA clamp edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw

CLAMPS FIRMLY: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project

EXTREME DURABILITY: Made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use

USE WITH ANY CIRCULAR SAW: This guide is compatible with any brand of circular saw, not just BORA tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the BORA NGX 50-inch aluminum extension.

PREMIUM QUALITY: The BORA clamp edge straight cut guide is designed for heavy-duty use in the toughest conditions. Its durable construction and precision engineering ensure an accurate cut every time.

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.

Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.

How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.

The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

Clamping end moves with handle for easy adjustability from one side

Locking handle grabs work surfaces for a secure grip that won’t budge

Made of heavy-gauge, rigid aluminum for extreme durability

Use with circular saws, routers, Jig saws, and other portable power tools

Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

Proprietary rubber band is made from a tough, tear-resistant material, with three extra-strength splines molded into it

Rubber band conforms to any shape and will not mar delicate materials

Spring clamp is made of high-strength nylon with fiberglass fill for added durability

Pivoting jaws accommodate angled pieces and allow full pad contact regardless of stock thickness

Handles are over-molded with an easy-to-grip rubber for greater comfort and control