The Best Fein Power Rotary Tools of 2023

Please do not use it for Heavy-duty Jobs; It is 4V that only suitable for light jobs.

Please check the MW324 if you need more powerful Cordless Rotary Tool.

[Versatile 62Pcs Accessories] This rotary tool comes with 62pcs accessories, which can be used to do all kinds of home projects or crafting jobs. A safety guard is Included, which is a special protection for pets' nail trimming.

[Compact＆Light weight] The length is only 6 inches for easy handling with less fatigue. And it comes with a carrying bag and Customized Storage Case for easy carrying and storing.

[45min Fast Charging] Micro USB connector makes charging more convenient, you can charge the 4V cordless rotary tool on anywhere and at any time. And it just needs 45min to full charge. Once full charge can be used for 3 hours.

[3 Variable Speeds] From 5000rpm, 10000rpm to 15000rpm that can satisfy your demand for DIY and handicrafts. NOTE: Please use the first or second low-speed gears to trim your pet's nails.

[What You Will Get] You will get 1 x 4v Cordless Rotary Tool; 1 x USB Charging Wire; 1 x Accessory Case; 62 x Accessories; 1 x Carrying Bag.

【High Stability】Our rotary tool uses copper chucks which improve the lock fit between the chuck and the connecting rod, not easy to fade. With deepen chuck design, the accessories are not easy to loose, and the stability is higher.

【3 Speed Adjustment with Safety】3.7V Mini multi-function tool generate strong and stable power with 3 variable speed modes can be controlled from 6000/14000/21000 rpm. Intelligent micro-control technology is applied to prevent over current, over voltage, overheating or short circuit. It will disconnect itself 3s later when the shaft is stuck to prevent the motor from burning out.

【Large Battery Capacity】 With a large capacity of 2000mAh battery, this power rotary tool equipped with a 2A 1m Type-C fast charging cable, it can be fully charged within 1-1.5 hours and be used for about 2 hours. When the battery is low, the LED indicator will flash to remind you to charge. You can charge while using it. Note: Please fully charge the main device before use when not charging

【Comfortable Grip】 Vastar multipurpose rotary tool is both aesthetic and ergonomic, with a housing surface made of ABS plastic and TPU rubber, which offers a comfortable grip without hand fatigue, even after prolonged use. Thanks to the advanced sound insulation technology, the noise is significantly reduced during operation.

【Widespread】 Equipped with a clear storage case in which the 51 small accessories of the multiuse rotary tool can be sorted, stored and easily transported, which allow you to quickly and easily switch between different accessories for a variety of light DIY jobs such as drilling, carving, grinding, polishing, rusting, manicuring and cutting. Ideal choice for DIY crafting project or small home improvement jobs

Notice----Do not fit Fein Starlock，Bosch MX30(Bosch MX30EC-31), Bosch Quick Release tools ; Do not fit Fein Supercut

Superior Value Oscillating Saw Blades kit--20 Pcs contain 6 different kinds of saw blades, for cutting wood, metal plastic and other materials, each type of saw blade is specific for a particular purpose. Our oscillating saw blades can meet a variety of needs, which could be used for workshop ,household or other place.

Tougher and Thicker Than Most--Made of alloy steel and high carbon steel , our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period.

Special Design for Precision cutting--Built-in length markers on two sides, one side is inch and other is centimeter, ensure you can get accurate cuts easy and fast while you working with it. 2 kinds of special design precision saw blades have longer wavy tooth that is specifically designed to provide faster, cleaner cuts in wood and plastic.

Universal Compatible System--Our quick release saw blades are compatible with many oscillating tools in the market, such as Fein Multimaster, Ryobi, Milwaukee, Hitachi, Black & Decker, Chicago, Craftsman and More

The powerful 480W motor turns bits at speeds ranging from 5000 to 32000 RPM, delivering the performance you need for numerous tasks.

The three claw chuck with high precision and high concentricity, can hold more accessories stably and accurately. Chuck range: 0.6-6.5mm.

6 step adjustment speeds allow the user to adjust the tool's power output to suit the task at hand, ranging from delicate grinding to aggressive and taxing jobs like grinding metal.

User-friendly design, lightweight and easy to hold. 35pcs practical attachments included in the set to meet your various DIY application requirements.

Multi-use rotary tool grinder for carving, cutting, grinding, slicing, taring, polishing, punching and many DIY craft and small family projects.

12 SPEED SETTINGS: This fully adjustable tool will switch from 11,000 to a whopping 18,000 OPM for a variety of applications, from the delicate to the heavy duty

DURABILITY: The all-metal gear case will help this tool resist common impacts on the job, prolonging its longevity

HANDLING: A rubberized mold covering the handle allows you to keep a firm grip of this multi-tool, improving handling even in slippery conditions

LED LIGHTING: Illuminate your work subject with the help of the onboard LED panel, located at on the head of the tool so it works from any angle

REDLINK TECHNOLOGY: The M18 batteries that plug into this tool have technology that allows cross-communication between the two platforms. This means that when the batteries know when the tool is close to overheating, and they’ll ease the amount of power they give out. This, too, improves the longevity of the multi-tool

Length 11-7/8 inches

Multipurpose rotary tool – From woodworking, carpentry, car care to jewelry making and more; The versatile 7760 Lite is the diyer’s go-to solution for small home improvement jobs, and crafting projects. Includes 10 accessories to kick start your projects right out of the box.

Quick accessory changes – With the patented EZ twist nose cap, accessory changes are easy and done without the need of a wrench. Collet size is 1.8”.

Variable speed - Seamlessly adjust to the ideal speed from 8,000 to 25,000 for optimal control & maneuverability

Easy battery charging - The rechargeable 4V Li-ion battery & convenient USB charger ensures that it’s ready whenever you are, Battery Size: 4-volt, Battery Amp Hours:2 Ah

Battery life indicator - LED light illuminates to notify you when the battery needs to be charged

Portable & lightweight - 360 degree soft grip material allows for comfort & precise control. Cordless design offers the freedom to take it anywhere

Compatible - Can be used with most Dremel accessories and a selection of attachments

What’s in the kit - 7760 Lite 4V Li-on cordless rotary tool, 10 piece accessories, accessory case, USB charging cable & power adaptor, user manual, quick start guide, 2 year warranty card

【Multipurpose Rotary Tool Set】The high-performance and low-noise rotary tool combined with 55 most popular power rotary tool accessories for DIY fine work, Not for Heavy-duty Projects. Whenever you think of carving, sanding, grinding, polishing or cutting, you'll find this electric rotary unit is a must for creating your resin crafts. Owning one is like having a whole toolbox

【5-Speed Setting】The cordless rotary tool can realize 5-speed adjustment(5000/7000/9000/12000/15000 RPM),which makes it easier to adjust to a suitable speed to meet the power demand in different scenarios. It allows you to sand in stages safely and carefully. Even people without any experience can easily get started and control the speed easily. Micro rotary tool make your creation handy

【Compact Lightweight】Powerful but small and light, just like holding a pen while in use, for ultimate control and precision as well as for comfort

【Quick USB Charging, Longer Running Time】Rotary tool cordless comes with 3.7V 2.0Ah rechargeable lithium battery, can work continuously for 200 minutes. One charge can be used for multiple times, and the range is stress-free. Battery powered rotary tool make your work one after another. (The indicator light will turn green when it is fully charged)

【Rotary Drill with LED Indicator】The upgraded small cordless rotary tool has a blind spot lighting LED design. Reduce backlight shadows and overcome the adverse effects of dark areas on the use of the drill for resin, and provide you with a better experience

357pcs Rotary Tool Accessories Kit: Including a carefully selected assortment of woodworking tools and accessories. Very suitable for sanding, polishing, cutting, sharpening, drilling, cleaning, carving, etc. Can be used for wood, glass, ceramic tiles, plastic, metal, etc.

Compact Storage Case: A sturdy and durable plastic case, easy to carry and hang. All accessories are organized, easy to place and light in weight. Various drill bits can be organized in order to prevent dispersal and mess.

Multi-Purpose: Ideal for home improvement, hobby, craft and whenever you need to polish, grind, drill, cut, engrave and more. This kit is universal fitment for all major brands.

Great for DIY Gifts: APEXFORGE 357pcs Rotary Tool Accessories Kit is great for DIY craft and small family projects. It’s a great gift for those who like hand crafts, and also a perfect present for Christmas, Birthday, Thanksgiving Day, Fathers' Day, etc.

2-year Quality Promise: Please contact us if you encounter any questions/concerns about anything. Our dedicated customer service team will always react within 24 hours.

Power Tools and Accessories

Country of manufacture: China

Manufacturer: Milwaukee

Powerful Motor - Unmatched performance under load

1/8-inch Collet - Compatible with all current rotary tool accessories

Variable Speed (5,000-32,000) - Up to 10-percent faster than the competition

Compact and Lightweight - Only 9.5-inch long and 1.3-pounds

Milwaukee Durability – Grinder style exhaust ports and protected front bearing deliver up to 10X the tool life

【Big Power】The rotating speed can reach 18,000 RPM ! Strong & Steady Power and Large Torque, Good for small and light crafts & projects (NOT suitable for large or heavy projects/crafts)

【Small Body & Ergonomic Design】Small & lightweight body, ergonomic design, easy and comfortable to hold in the hand, letting you perform detail intricate work smoothly and effortlessly

【High Quality & Long Life】Pure Copper Collets for firm clamping; High Quality Copper Motor with strong power, smooth rotation and long use life.

【101-Piece Accessories】Includes 3 engraving bits, 5 grinding stones, 2 sanding drums, 2 mandrels, 2 wire brush wheels, 2 drill bits, 2 collets, 1 sanding wheel, 3 steel cutting wheels, 12 felt wheels, 16 sanding bands, 15 sanding disc, 36 cutting wheels.

【Widely Uses】Works for metal, glass, wood, plastic, etc. Can be used for sanding, polishing, grinding, engraving, cutting, drilling, derusting and more. Perfect for handmade crafts and home repair works.