The Best Fire Hose Fittings of 2023

Male connector to connect a hose to a female thread

Male threads on one end and female threads on the other end for connecting two fire hoses

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Country of origin: China

Hex nipple fitting 1-1/2" female National Pipe Taper (NPT) threaded connection on one end and a 1-1/2" male National Standard Thread (NST) or National Hose (NH) connection on the other

Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Suitable for use in general firefighting applications. With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench

Hex tube fiting as a short length of pipe with threaded ends for connecting threaded pipes

In the package: 2 inch nozzle, 2 x Aluminum 2 inch Fittings.

[ Awesome Converts ] Used for connecting propane gas appliances to natural gas supply.

[ Multi-Suitability ] Perfect for Weber, Charbroil grill, patio heater, pizza oven and more gas appliances.

[ Flexible Hose ] 12 feet 3/8-inch inside diameter hose with 3/8" male quick disconnect plug X 3/8" female flare.

[ Brass Fittings ] 3/8" quick connect/release fitting, make it easy to attach and remove this gas hose as needed.

[ Durable & Safe ] This natural gas hose kit features solid brass fittings and long lasting rubber hose to provide safety and no leakage.

2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant

Female side - 2-1/2" NH / NST. The female will only connect to a male 2-1/2" NH / NST

Male side - 2" NPT. The male will only connect to a female 2" NPT or 2"NPSH

Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Pin lug for quick disconnect.Super Quality Brass Fire Equipment

Thermoplastic 1.5 inch nozzle with NPSH threads attached to a 1.5 inch aluminum female camlock

Adjusts from straight stream to fog for multipurpose use. Maximum 100 psi pressure (water only)

Camlock Material - Aluminum. Brass stem of nozzle for resistance to corrosion

Aluminum 1 1/2" camlock and groove nozzle has the option of a shut-off, fog pattern or a straight stream. Heavy-duty 1 1/2 inch nozzle with NPSH thread

Provides consistent volume at any spray angle. This nozzle will only connect to a 1-1/2" male camlock hose

【RV Owner Must Have】 Connect propane appliances directly to your RV propane supply. No need to hook up extra tanks.

【Compatible】 Fit for propane fire pit, patio heater, camping grill, Camp Chef stove and other propane appliances with 3/8" male flare fitting

【Perfect Length】 12-foot long, more flexible to move grill anywhere you want.

【Well Built】 Made from high-quality rubber and sturdy brass to prevent leaks.

【Standard Brass Connector】1/4" male quick-disconnect fitting x 3/8" female flare fitting.

Hex nipple fitting 1-1/2" NH to 1-1/2" NPT Double Male Fire Hose Adapter

Male to male adapters are used to bridge two female hose, pipe or valve fittings.

Suitable for use in general firefighting applications. With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench

Hex tube fiting as a short length of pipe with threaded ends for connecting threaded pipes

Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Package weight :0.2 lbs

Package height :11.684 cm

Package length :10.668 cm

Package width :10.921 cm

◆Hydrant Cap including Cap & Chain

◆Quick access when fire hose connections are needed

◆Provides protection against foreign material into the FDC threads

◆Durable plastic meets code and detours theft of fire department connection caps

◆Fits some standpipe systems and connections