The Best Internal Grooving Inserts of 2023

☞ Inserts Material : Carbide inserts with CVD Coating. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance.

☞ Insert Applicaiton: Suitable for Stainless steel parts processing.

☞ Inserts Feature: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up. Vacuum hardening, exquisite craftsmanship, easy cutting.

☞Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces .Vacuum hardening, exquisite craftsmanship, easy cutting.

☞Package includes: 10pcs SP200 Gold Grooving cut-off inserts

Model: MGIVR2016-2 MGMN200-G

About holders:made of High-Quality Alloy Steel 40CR, Using Free Forging Process, with Higher Mechanical Properties. Prompt Work Efficiency.

Coated:CVD MT-TiCN+Tic+Al2O3

Mainly used for semi-finishing of steel.

Package:10pcs insert(1box)+1 boring bar

Model：1PCS MGIVR2016-2 + 1PCS MGIVL2016-2 + 2PCS MGMN200-G NC3020

Shank Diameter: (5/8" inch / 16*16mm) ; Overall Length：( 6.3" inch / 160mm)

Grooving holder : Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade.

Insert : Turning inserts exquisite workmanship, high strength, high toughness, stable and durable.

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Minimum bore determined when matched with insert. .575" Minimum bore with threading inserts and grooving inserts .063" and smaller. .640" Minimum bore with grooving inserts .064" and greater.

This bar is compatible with grooving and threading inserts. Bar includes: MGC1 Clamp, F31 Screws and W31 Wrenches.

6:1 Diameter to Length Extension Ratio. 3" maximum extension recommended for this bar.

U.S. Patent 6,722,825 and 6,974,282.

CORRECT OVER-SUPINATION: Correct Plus is a 3/4 orthotic that helps correct over-supination

REALIGN FEET: Gently shifts foot back into correct alignment

PREVENT FOOT PROBLEMS: over-supination can contribute to plantar fasciitis, tendonitis, shin splints, and more

NATURAL LEATHER: Correct Plus is made with natural, vegetable tanned leather and comfortable latex rubber

HAND MADE IN GERMANY from Natural Vegetable Tanned Leather

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Designed for CNC, Swiss and conventional machines. Toolholder includes: C Clamp, S3808 Screw, W1005 Wrench and P0305 Pin.

This toolholder is compatible with grooving, turning, chamfering and threading inserts. Use inserts beginning with 'L'.

When used for cutting undercuts along an internal shoulder, select: Left hand inserts for M03 rotation or Right hand inserts for M04 rotation.

U.S. Patent 6,688,816 and 6,824,333.

UN-60 degree full profile threading insert

Right hand cutting direction

Tolerance class is 2A/2B

Screw pitch is 16 TPI

Thickness is .143"

Use with Large series toolholders.

GTN-2(QC1402) Width: 0.079"

Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

For cut-off and grooving

For cutting all steel and stainless steels and non-ferrous materials

10pcs With a plastic box for convenient storage

See Downloads section below item photos for detailed product information, technical information and compatible inserts.

Minimum bore determined when matched with insert. .575" Minimum bore with threading inserts and grooving inserts .063" and smaller. .640" Minimum bore with grooving inserts .064" and greater.

This bar is compatible with grooving and threading inserts. Bar includes: MGC1 Clamp, F31 Screws and W31 Wrenches.

4:1 Diameter to Length Extension Ratio. 2" maximum extension recommended for this bar.

U.S. Patent 6,722,825 and 6,974,282.