The Best Lab Autoclaves of 2023

Max temperature is up to 134℃, suitable for 4-6 minutes rapidly autoclaving.

Automatic autoclaving controlled by computer.

Over-temperature, over-pressure automatic protection.

Safety protection for water lacking.

Fully stainless steel structure.

Pressure adjustment: adjust the inter pressure. If over standard value automatic vent.

Avoid overheat protect device: When inter temperature overheat, power break electric current automatically.

Temp and Press display: LED several windows. Di~sinf~ection principle: Uses the vapor power emissions cold air / 2 time.

Material: Stainless steel #304. Boiler chamber surface with burnish.

Surface deal with: The machine foundation and the shell use high temperature baking varnish processing.

☑️CHAMBER SIZE : stainless steel #304 ; 18Liter ;

POWER : 1100VAC, TEMP CONTROL DESIGN : chip control

☑️ 121℃/0.12Mpa ; 134℃/0.22Mpa

☑️TIME : 121℃ 30Min /134℃ 10Min

☑️ Heating-over protection ;

【Durable Material】:This autoclave adopts fine 304 stainless steel material,which is resistant to acid and alkali,enjoy a long service life.(Search B08S6PFC67 for the replacement Insert Module Elements )

【Overpressure Protection】:Overpressure auto-discharging 0.145-0.165Mpa.And there is self inflating type seal to make sure excellent sealing effect,tempereture and pressure can be hold.

【High Efficiency】:The highest working temperature126°C-128°C/258.8 -262.4℉,widely used in cleaning medical instruments,dental material ,scientific research tools and so on.

【Dual Heating System】:Dual heating system of coal and electric,the immersion electric heat pipe heating, less power consumption, heating up fast.

【Dual Gague】:Dual scale numerical indication pressure gauge to show the pressure,which help you to know about and read the data easily.

[LABORATORY QUALITY ] - The multi-functional lab autoclave is suitable for cleaning tools, glassware, solutions and culture media.

[EASY OPERATION] - The high temperature steam autoclave can use flame or electricity elicit the same effect.

[EFFICIENT] - With fast heating, this portable autoclave can reach high temperatures and pressures, greatly reducing the cleaning time.

[SECURITY DESIGN] - Equipped with two valves. The safety valve would automatically deflated when device overpressure. The machine will automatically cut off to ensure safety and save energy when the water runs out.

[PARAMETER] - Capacity of this steam autoclave is 5.4 L (9.4-in diameter and 4.7-in high). It’s working temperature is 121-126 degrees Celsius (250~259°F) and working pressure is 0.14-0.17Mpa (20.3~24.6 psi).

Your purchase includes One Tuttnauer 1730 Valueklave sterilizer with 3 Trays

Sterilizer chamber dimensions – 7” x 13” | Chamber volume – 2 Gallon | Tray Size – 11.6” D x 4.7” W x 0.8” H | Standard Cassettes Capacity – 2 half | Voltage/ Frequency – 120V/50-60Hz

Fast cycle time- 11 minutes from a hot start

Automatic shut off at the end of both the sterilization and dry cycles

[FUCTION] - The multi-functional lab Autoclave can clean tools, solutions and culture media. Suitable for laboratory, research Institute, public health centers, etc.

[EASY OPERATION] - The high temperature steam autoclave can use flame or electricity elicit the same effect. It’s easy to operate after simple learning.

[EFFICIENT] - Since fast heating, this device can reach high temperatures and pressures, greatly reducing the cleaning time. It is safe and reliable.

[SECURITY DESIGN] - The lid is equipped with safety valve and releasing valve for the safety valve would automatically deflated when device overpressure. The machine will automatically cut off to ensure safety and save energy when the water level is lower than the heating tube.

[PARAMETER] - Capacity of this high pressure steam autoclave is 14.8 L (11-in diameter and 9.4-in high). It’s working temperature is 121-126 degrees Celsius (250~259°F) and working pressure is 0.14-0.17Mpa (20.3~24.6 psi).

💎The highest working temperature126°C-128°, overpressure auto-discharging 0.145-0.165Mpa

💎Dual scale numerical indication pressure gauge

💎Self inflating type seal，dual heating system of coal and electric

💎Operating easy and security reliable

💎Tips： Pls add enough water(at least 3.5 L) and do not make it work longer than 60mins per time to keep the Autoclave live longer.

Maximum temperature: up to 134 ℃, suit for 4-6 minutes rapidly sterilizing.

Automatic controlled by computer, easy to operate.

Fully stainless steel structure.