The Best Lab Water Baths of 2023

HIGH-PRECISION TEMPERATURE: The JoanLab Thermostat Water Bath has a wide temperature range, ranging from room temperature to 100°C. The distinguishability is 0.1°C. The digitally controlled temperature can be set along with a built-in timer, which ranges from 0-999 minutes.

LARGE CAPACITY: The water bath’s 160mm x 160mm x 130mm stainless steel interior chamber has a large 3-liter capacity. The beaker hole’s size can be conveniently changed depending on the project and the user’s needs.

DUAL DISPLAY: Dual digital display for fast display of PV and ST temperatures. The double-row ble LED display makes the numbers much more clear and softer.The large LCD digital display is easy-to-read and features intuitive controls for setting the temperature and time. It is covered with protective frames to prevent damage from overflowing uwater and is set at an incline for user comfortability and ease of use.

LAB QUALITY: The thermostatic water bath is made from lab quality materials built for use year after year. The water bath’s liner and cover plate are made from high-quality 304 stainless steel to prevent rust and corrosion. The interior chamber is also designed without joints or welds to further eliminate rust, corrosion and leakage and to enable easy cleaning.

Direct from Manufacturer-JOANLAB is a manufacturer which has more than 11 years experience in the field of lab products. We back the water bath with a 1 Year Warranty.

【Laboratory General Equipment】The water bath is a general laboratory equipment with a heated water chamber, which is used to cultivate samples at a constant temperature.

【Well Designed】Cancave panel design protects the panel from damage by overflowed water; Silicone cover rings allow selectable opening.

【Accurate】High accuracy of temperature control: Accurate electronic temperature probe, high accuracy.Temperature range: room temperature to 100°C with increment of 0.1°C.

【Widely Used】Uniform heating: Porous heating, uniform heating, to meet different needs.

【Digital Display】Double line display shows both the actual temperature(PV) and set temperature (SV).Control panel has an inclined angle to increase the comfort of operator. Double-row blue LED display screens shows bright and soft digitals.

PVC Weight Ring for Stabilizing Flasks in water bath.

For stabilizing 250-2000 ml flasks.

Inner diameter: 2.25" (56 mm).

Weight: 1 lb 3 oz.

HIGH-PRECISION TEMPERATURE: The JoanLab Thermostat Water Bath has a wide temperature range, ranging from room temperature to 100°C. The distinguishability is 0.1°C. The digitally controlled temperature can be set along with a built-in timer, which ranges from 0-999 minutes.

LARGE CAPACITY: The water bath’s 350mm x 150mm x 140mm stainless steel interior chamber has a large 3-liter capacity. The beaker hole’s size can be conveniently changed depending on the project and the user’s needs.

DUAL DISPLAY: Dual digital display for fast display of PV and ST temperatures. The double-row ble LED display makes the numbers much more clear and softer.The large LCD digital display is easy-to-read and features intuitive controls for setting the temperature and time. It is covered with protective frames to prevent damage from overflowing uwater and is set at an incline for user comfortability and ease of use.

LAB QUALITY: The thermostatic water bath is made from lab quality materials built for use year after year. The water bath’s liner and cover plate are made from high-quality 304 stainless steel to prevent rust and corrosion. The interior chamber is also designed without joints or welds to further eliminate rust, corrosion and leakage and to enable easy cleaning.

Direct from Manufacturer-JOANLAB is a manufacturer which has more than 11 years experience in the field of lab products. We back the water bath with a 1 Year Warranty.

EXPLORE volume, buoyancy, flow, and more with this wet and wild water science kit!

EXPERIMENT at the bathtub, sink, or water table!

LEARN with seven hands-on kids' experiments printed on waterproof cards!

READY for endless experiments thanks to durable plastic construction!

Great for any toddler ages 3+

A water bath toy activity center that attaches to the tub and generates a double chain reaction of surprising water effects.

2 bath tub water play accessories: A test tube container with 1-10 numbered volume marks and a detachable funnel for filling, pouring and playing. Test tube holder attaches to tub for playing and storing.

Pour water into the water gauge funnel to spin gauge and create 10 water sprays. Water causes eyes to roll, a stream from the mouth, and spins the propellor for endless hours of fun and learning

Boosts fine motor skills and hand eye coordination for toddlers and preschool aged children.

Encourages independent play and scientific exploration. Supports STEM by putting physics & mathematic concepts into play

TEMPERATURE RANGE: 20 to 100°C (68-212°F)

ACCURATE: Temperature fluctuation: +/- 0.5°C

FAST RAMP UP: 20°C to 37°C in 10 minutes. The water bath can run continuously as long as water is inside the vessel. As a safety measure it will shut off after 2 hours if the temperature is above 60°C

EASY TO USE AND EASY TO READ: Press the Power button, then + or - to set desired temperature. Water temperature clearly shown on digital display

SMALL AND COMPACT: External dimensions of 7.5x5.5x11 in with cover, Internal water vessel dimensions: 6.5x4x4 in

HIGH-PRECISION TEMPERATURE: The JoanLab Thermostat Water Bath has a wide temperature range, ranging from room temperature to 100°C. The distinguishability is 0.1°C. The digitally controlled temperature can be set along with a built-in timer, which ranges from 0-999 minutes.

LARGE CAPACITY: The water bath’s 300mm x 300mm x 140mm stainless steel interior chamber has a large 12-liter capacity. The beaker hole’s size can be conveniently changed depending on the project and the user’s needs.

DUAL DISPLAY: Dual digital display for fast display of PV and ST temperatures. The double-row ble LED display makes the numbers much more clear and softer.The large LCD digital display is easy-to-read and features intuitive controls for setting the temperature and time. It is covered with protective frames to prevent damage from overflowing uwater and is set at an incline for user comfortability and ease of use.

LAB QUALITY: The thermostatic water bath is made from lab quality materials built for use year after year. The water bath’s liner and cover plate are made from high-quality 304 stainless steel to prevent rust and corrosion. The interior chamber is also designed without joints or welds to further eliminate rust, corrosion and leakage and to enable easy cleaning.

Direct from Manufacturer-JOANLAB is a manufacturer which has many years experience in the field of lab products. We back the water bath with a 1 Year Warranty.

Temperature range: room temperature +10 to 100°C with increment of 0.1°C; Heating power: 300W, 110V

Double line display shows both the actual temperature(PV) and set temperature (SV)

Water chamber size: 16x16x13cm (~6x6x5inch); Product dimension: 8x8x8.5 inch

Cancave panel design protects the panel from damage by overflowed water; PP cover rings allow selectable opening

One year warranty with US-based customer support.

PRECISE HEATING: Recirculating pump cycles the water to keep it within 0.3°C of set temperature

POWERFUL: 800 Watts heater quickly heats up the water

PROGRAMMABLE: Timer is programmable from 0 to 24 hours

EASY TO USE AND READ: Heats up to 100°C in 0.1°C increments. Digital display clearly shows the current temperature

NOTE: This water bath can only be run continuously for 24 hours at most for safety reasons. After that time the settings need to be reset.