The Best Lcr Meters of 2023

Used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc

Can also be used to detect infrared wave forms and Zener Diode, it has the function of self-calibration

The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the "IR" light, then press the button in the remote control)

One key operation, automatically detect and shutdown, and you can press the Multi-function button to close the detector

Fine workmanship and good performance.Durable and easy to use

Power Supply: The meter can be powered by included Φ5 DC power supply cable and mini USB cable. You can also install 4×AA batteries. Each way makes the meter work. Note: the AA battery is not included.

Measuring Range: Capacitance 0.01pF-100mF, inductance 0.001uH-100H, frequency 500KHz/500Hz-50KHz.

High Precision: Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF; 1% of inductance range 1uH~1H, 5% of range 1H~100H

Easy to Calibrate: just press the button "ZERO" to calibrate, open circuit calibration in capacitance measuring mode, short circuit calibration in inductance measuring mode.

Applications: This portable and handheld tester 1×handheld LC meter, 1 pair of alligator clip test leads, 1×LCR Kelvin alligator clip test lead, 1×mini USB cable, 1×manual

Test ranges:Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube, ESR, Resistance, Adjustable potentiometer

Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.

High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal)

128*64 big Backlight LCD display,only 2mA when stand by.

Auto power off function to avoid unnecessary waste, saving battery power, improved battery life

This LCR-T7 Transistor Tester Built-in high capacity rechargeable lithium ion battery. Lithium ion battery voltage detection.

Used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc

Automatic detection of zener diode 0.01-30V, self test with automatic calibration

The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the "IR" light, then press the button in the remote control)

One key operation. Auto power off (timeout settable).

100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz/50kHz/75kHz/100kHz test frequency, 0.3/0.6 Vrms test level, 0.30% accuracy

Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR

4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead

Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R); reset function: open/short circuit calibration; mode: series and parallel

2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs

🏆【Upgrade】:TC-T7-H is an upgraded of LCR-T7,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, BJT, resistor and capacitor and other components, etc.

🍀【Built-in Battery】:Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged.

👍【Add IR Decoder】: After the component detection is completed, the infrared remote control at the tester "IR" test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.

🥂【Auto shut-down Function】: Our advanced electronic transistor tester with automatic shutdown and manual shut-down function.use accessories, more convenient and efficient to complete your project.

✔️【Warranty & Guarantee】: 6 month extended warranty and 24/7 friendly customer service. Any situations, please feel free to contact us by email, especially when you need the manual.

This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).

This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.

Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.

The "Sorting"mode could help the user to make a quick sort for a bunch of components.

Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.

Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2.

High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5); (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty forward voltage drop of diode;Forward voltage of DC:Approx.1mA;Reverse DC voltage:Approx.2.8V

Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation.

Multi-function: Auto power off; Data Hold function; Low Power Indication; ZERO ADJ for Capacitance.

New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip; The black pen is connected to the negative pole and the red test lead is connected to the positive pole

Fluid LCR and Impedence measurements with hold function, Automatic or manual component type.

Automatic or manual test frequency, DC, 1kHz, 15kHz or 200kHz.

Enhanced measurement resolution: 0.2uH, 0.2pF and 0.2 Ohms.

Easy menu system for user settings.

Full 1 year Manufacturers Warrenty

40000 Counts resolution on primary and 10,000 counts resolution on secondary display

L, C, R and Z primary Measurements; automatic calculation of secondary parameters D, Q, Theta, and ESR

0.5 Percent basic accuracy

Relative mode; data hold and min/max/average recording

1 Year warranty