The Best Lighted Towing Hitch Covers of 2023

Fits 1-1/4 inch and 2 inch hitches

4-flat connector installed for quick wiring

Low illumination with tail lights on and High illumination with brake lights on

Long life LED light source

Easy hook up, no tools required

Spins freely in the wind as you drive

Triple chrome plated ABS plasic

Protects hitch systems from rust and corrosion

Fits 2” or 1-1/4” hitch receivers

Provides Easy Access - to truck beds, roof racks and SUV interiors. Once secured, the lighted hitch cover provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.

Lets Other Drivers See You - the lighted hitch cover features LED brake lights to provide added visibility for other drivers. When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights.

Sturdy, Ample Step- The 100% steel tube step measures 19” wide and 3.75” in diameter, with a high-impact, anti-skid step pad.

Universal Fit for Most Hitch Receivers - Fits 2” and 1-1/4” hitch receivers (includes reinforced plastic adapter), which are the most common sizes

Easy to Install - Installs in minutes/includes plug-and-play wire harness To install you simply loosen the three bolts and tighten around the factory exhaust pipe

CZC AUTO hitch cover light has 12LED for brake light, rear fog light function. Please noted: turning signal indicator lighting function can be realized if you purchase & install 2 items on your car.

Update of Wire Length: Red Len size:3" x 3" ,Wire length 18" (we increase the cable/wire available length to 18”instead of 10-1/2” for enough useable length wire). Fits standard 2" x 2" hitch receiver,but not fit special size truck ,like 2008 3500HD Chevrolet Truck

Foam gasket to ensure a snug fit ,NOT include hitch pin&clip

Super High visibility and Longer Lifetime LED advantage！

CLIENT SUPPORT: Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you.

▶Built-in super bright smoked lens LED brake light provides added safety when your hitch is not in use.

▶Lamp size: 3-1/4 x 3-1/4 inches to fit 2" standard tow hitch and function as tail brake light or rear fog light.

▶Comes with a hitch pin with lock and foam lining to ensure a snug fit.

▶Unlike current 9-LED brake light w/ bright mode only, the 15-LED has brake AND running tail light; will not blink with turn signals (only).

▶The 15 LED lights broadcast your intentions to everyone behind you, letting other drivers know when you're stopping, turning or changing lanes. The trailer hitch cover works with all 2" receivers and a foam lining ensures a snug fit.

*WARNING**PROFESSIONAL INSTALLATION REQUIRED & HIGHLY RECOMMENDED - Hardwiring IS required to use the reverse light.

Includes plug-and-play wire harness that requires a standard 4 Way Flat Plug for brake lights only. To use the reverse LED light function you need to splice the white wire into your car's reverse light bulb's positive wire. REVERSE BRAKE LIGHT WILL NOT WORK if you do not hardwire the white wire.
Will not work with newer vehicles with OEM LED tail lamps or aftermarket LED tail lamps or LED bulbs. Please contact us to make sure that this will work with your vehicle.

ALL-IN-ONE DESIGN- This 80 LED and 9 LED Reverse Bulb - 3 x 3” hitch cover light that provides Driving, Brake, and Reverse Lamp that works all together. These additional LED bulbs helps provide brighter and additional visibility for other drivers. Do not SETTLE for just a basic hitch cover light that only has one function or only 9-15 LED.

FITS MOST HITCH RECEIVERS - Fits 2 x 2 hitch receivers”. Note: May not be compatible for vehicles with original(OEM) or aftermarket LED tail lamps. Please check your vehicle if they may have aftermarket LED installed. Item may not work properly. May require a voltage stabilizer to use this product.

Please make sure to read the instructions and warning on images to ensure proper installation. Hard wiring is required to use the reverse light function. Item may not work properly if you have other aftermarket LED installed on your vehicle. Please message us if you have any questions.

Triple-chromed ABS plastic

Eyes can be wired to light-up red

Fits 1.25 in. and 2 in. hitch receivers

Protects hitch from rust and corrosion

Provides Visibility and Protection - The lighted Chevrolet Hitch Cover provides an added measure of visibility for other drivers while protecting your trailer hitch receiver from road grit and corrosion.

Light and Durable - Made from ABS with a protective black finish, the Chevrolet hitch cover won't rattle and can handle all the elements you care to throw at it

Just slide the hitch cover stem into the hitch receiver and secure with a hitch pin (not included), then plug the 4-pin electrical connector into the connector on your vehicle

Officially Licensed Chevrolet Product - This product has been reviewed and approved by Chevrolet to ensure it meets all brand standards. This is one of our most popular Chevrolet Wrangler and Chevrolet Renegade accessories

Easy to install

Fits 1-1/4 inch and 2 inch hitches

4-flat connector installed for quick wiring

Low illumination with tail lights on and High illumination with brake lights on

Long life LED light source

Easy hook up, no tools required

Easy installation / Changeable lens / Patented.

Universal fit for both 1.25" & 2" trailer hitch receivers (locking pin sold separately); plugs into a standard 4-way electrical harness.

Housing is made of powder-coated durable ALUMINUM not plastic. Lens is made of ABS and is changeable. 1-Year Limited Warranty.

SMD's offer better illumination than LED's and are designed for maximum legal brightness and last 100K+ hours.

Separate yourself from the rest...illuminate your ride with the BEST! Packaged weight: 0.88 lb.