The Best Marine Subwoofers of 2023

Built-in blue LED lighting; 600 watts maximum power handling; 180 watts RMS; 4-Ohm single voice Coil

High impact asa plastic grille; mica-injection polypropylene Cone woofer; santoprene rubber surround

Meets or exceeds both ASTM B117 (Salt Fog Exposure) and ASTM D4329 (UV Exposure); stainless steel mounting hardware included

Mounting hole requirement: 8-7/8-inches; mounting depth: 4 1-2-inches

Gold Plated speaker terminals

Injection-molded polypropylene cone produces defined, high-resolution low frequencies from the excellent self-damping and bass reproduction

Large diameter voice coil delivers an increase in real power and efficiency, providing a truly high-quality sound experience

High-quality basket construction delivers enhanced durability when exposed to the harsh marine environment

Experience multicolor RGB LED lighting to enhance your onboard entertainment experience

8 inch high performance subwoofer for your boat, car, or ATV, with 250 watts of RMS power handling

Put heart thumping bass in your vehicle by land or sea

Low profile design saves space needed for sub enclosures

Features Dynamic Balance technology for richer, cleaner, more full range sound

IP56 marine rating makes this sub resistant to water, dirt, salt fog, UV, and humidity

8'' Slim Marine Woofer - Phase Shift Switch : 0 or 180° - Thermal , Short and Overload Protection Circuits - Dimension : 14.5''(D) x 9.5''(W) x 3''(H)

RCA Low Level Input - Adjustable Input Sensitivity : 0.2V-3V - Fuse : 2 x 15A - Weight : 10.5 LBS

High Level Input - 0 to +12Db Variable Bass Boost (@ 45Hz) - Max Power : 1000 Watts

Green and Red LED Power Status Indicator - Low Pass Filter (50-150 Hz) - RMS Power : 300 Watts

Remote Level Control - Soft Delay Remote Turn-On - RMS Power of Amplifier : 100 Watts

8'' Slim Marine Woofer RCA Low Level Input High Level Input Green and Red LED Power Status Indicator Remote Level Control Phase Shift Switch : 0 or 180° Low Pass Filter (50-150 Hz) Soft Delay Remote Turn-On Thermal , Short and Overload Protection Circuits 14.5''(D) x 9.5''(W) x 3''(H)

Rockville MS10LW 10" marine subwoofer with LED (White). Max Power: 2400 Watts. RMS Program Power: 1200 Watts

RMS Power: 600 Watts. Polypropylene cone with Rubber edge. 2.0" 4 Layer dual voice coil

Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend)

Magnet 80 Oz double stacked magnet. Frequency response: 30Hz-4Khz

Impedance: Dual 4 ohms. Sensitivity: 90dB

Magnet structure - 60 oz

2" voice coil - 4 ohms - 30hz-2.0Khz - 88Db

Min. Mounting depth - 4.5" mounting diameter - 8.75"

Free space resonance: 28Hz, frequency response: 30Hz - 2Khz

12-Inch Dual 2 ohm Shallow Mount Subwoofer

Peak Power: 800 Watts | RMS Power: 500 Watts

Shallow Mount Design - Mounting Depth: 4.92"

High Performance Pressed Paper Cone Stitched to Premium Foam Surround

Sensitivity: 86.7 dB | Fs: 35.3 Hz

Frequency Response: 25 Hz - 300 Hz

12 inch high performance subwoofer for your boat, car, or ATV, with 370 watts of RMS power handling

Put heart thumping bass in your vehicle by land or sea

Low profile design saves space needed for sub enclosures

Features Dynamic Balance technology for richer, cleaner, more full range sound

IP56 marine rating makes this sub resistant to water, dirt, salt fog, UV, and humidity

Marine Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts

Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case

Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz

Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow

Stable at 1 ohm | Remote Subwoofer Level Control Included

Highly Efficient Heatsink Design allows for Maximum Reliability & Performance

Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it

Dimensions: 15” x 9. 75” x 3”. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles

: sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality