The Best Metabo Power Rotary Tools of 2023

SDS Plus Rotary Hammer for drilling, chipping, and hammeriing

MOTOR: 7. 5 Amp motor that produces 2. 4 ft/lbs of impact energy for powerful hammering with fast drilling

POWER: 0-4, 300 full-load impact rate delivers forcible hammering

APPLICATIONS: Ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering

MODES: 3-modes of operation; drilling only, hammering only and hammer drilling for flexibility within a range of applications

SPEED CONTROL: Electronic variable speed control gives the tool a no-load RPM of between 0-1, 110 and 0-780 in reverse

ANGLE ADJUSTMENT: Available on mode selector dial to change the chisel bit to different angles

LIGHTWEIGHT: Only 6. 7 lbs and compact for better maneuverability and less fatigue

HANDLE: Double-molded 360 degree side handle for comfortable operation and better control

EASY BIT REPLACEMENT: One-push bit mounting makes changing out bits quick and easy

Hitachi Power Tools is now Metabo HPT. Same Tools. New Name

Powerful 10 amp motor produces 6.3 ft. lbs of impact energy for tough jobsite applications

2800 Full load max impact rate to quickly remove stubborn materials

620 No-load RPM for faster drilling speed

Soft over-molded Handle for added comfort and control, less fatigue

Two modes of operation allow for greater versatility by providing the option of hammer drilling or hammer only

Large trigger switch for easy grip and control

INCLUDED: Tool Body Only (battery & charger sold separately)

POWER: High impact energy of 1.9 ft-lbs and 1,050 RPM/3,950 BPM for high drilling speeds and great demolition performance

APPLICATIONS: Capable of drilling 1-In holes into concrete and 1/2-In holes into steel

SAFETY: Reactive Force Control senses when a tool bit is overburdened stops the motor

3-MODES: Drilling only, hammering only and hammer/drill for flexibility within a range of applications

LED: Built-in white LED to provide plenty of light in dark spaces

BIT MOUNTING: One-push bit mounting makes changing out bits quick and easy

MOTOR: Brushless Motor Technology for higher efficiency, increased run time and longer lifetime of the tool

DEPTH GAUGE: Consistently drill depths

LIGHTWEIGHT: Only 6.8 lbs (without battery) for less fatigue during extended use

【Multipurpose Rotary Tool Set】The high-performance and low-noise rotary tool combined with 55 most popular power rotary tool accessories for DIY fine work, Not for Heavy-duty Projects. Whenever you think of carving, sanding, grinding, polishing or cutting, you'll find this electric rotary unit is a must for creating your resin crafts. Owning one is like having a whole toolbox

【5-Speed Setting】The cordless rotary tool can realize 5-speed adjustment(5000/7000/9000/12000/15000 RPM),which makes it easier to adjust to a suitable speed to meet the power demand in different scenarios. It allows you to sand in stages safely and carefully. Even people without any experience can easily get started and control the speed easily. Micro rotary tool make your creation handy

【Compact Lightweight】Powerful but small and light, just like holding a pen while in use, for ultimate control and precision as well as for comfort

【Quick USB Charging, Longer Running Time】Rotary tool cordless comes with 3.7V 2.0Ah rechargeable lithium battery, can work continuously for 200 minutes. One charge can be used for multiple times, and the range is stress-free. Battery powered rotary tool make your work one after another. (The indicator light will turn green when it is fully charged)

【Rotary Drill with LED Indicator】The upgraded small cordless rotary tool has a blind spot lighting LED design. Reduce backlight shadows and overcome the adverse effects of dark areas on the use of the drill for resin, and provide you with a better experience

18V MultiVolt Hammer Drill (DV18DBFL2): This Hammer Drill boasts 0-1,800 RPM and up to 620 in-lbs of torque and is equipped with a 1/2” keyless ratcheting metal chuck to minimize bit slippage while in use

18V MultiVolt Triple Hammer Impact Driver (WH18DBDL2): By incorporating a third impacting anvil as opposed to the two-anvil system, the Triple Hammer delivers a high torque of 1,832 in-lbs

36V MultiVolt Circular Saw (C3607DA): This award-winning cordless circular saw features the power for the pro job site and a cut capacity of 2-7/16” at 90 degrees to tackle the toughest jobs

18V MultiVolt Reciprocating Saw (CR18DBL): Featuring an impressive stroke length of 1-17/64” and up to 2,500 SPM, this lightweight tool takes cutting speed to the next level

18V MultiVolt Work Light (UB18DJL): This work light lasts over 51 hours of run time (with a 36V/18V 2.5Ah battery)

BRUSHLESS MOTOR: More run-time, increased power, and extended durability with essentially no maintenance

Rotary Hammer with 1-1/2-Inch spline shank

MOTOR: Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity

POWER: Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete

APPLICATION: Great for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods

LIGHTWEIGHT: Only 14.1 lbs for less fatigue

MODES: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob

LOW VIBRATION: Only 18.8m/s2 (full load) for more comfortable operation in hand

LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment

SAFETY: Safety clutch shuts down rotation in the event of a bound bit for improved user protection

HANDLE: Adjustable 360 degree side handle provides better control and can be removed easily

Same Accessories. New name. Hitachi Power Tools has renamed to Metabo HPT

Self contained unit with a HEPA Filter captures 99. 97% of particles 0. 3 microns and larger

12. 36 CFM airflow rate

Translucent collector box with 300 ml filter capacity

3-Second vacuum run-off time for effective extraction of additional particles

Powered by Li-Ion battery when unit is connected to the tool

Capacities: 11/64' to 25/32' effective bit diameter, 1-31/32' to 3-15/16' effective bit length, 3-11/32' max effective hole drilling depth

Made in Germany

World Class production facilities and techniques

Absolute focus on quality by our employees at every Stage of production

Manual, Hybrid and fully automated assembly systems

German engineering and ingenuity

💪【POWERFUL MOTOR】13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal.Heat resistant copper wire motor allows long working time without burning the machine.

💪【3 Function Modes】Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) .Compared with single function switch design, the double function switch design can extend service life.

💪【ERGONOMIC DESIGN】360° adjustable handle applies to different work and the upgraded double layer anti-vibration system designed to decrease the vibration effectively, and reduce fatigue. Anti-dust bottom structure extend the hammer’s use life.

💪【WHAT YOU WILL GET】SHIELDPRO hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, grease,2 pcs of spare carbon brush and portable toolbox.

💪【WIDE APPLICATION】SHIELDPRO is suitable for professional or daily home users. And it is suitable for wood, masonry, concrete, brick and metal.Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. SHIELDPRO provide 24 months warranty service.

Made in Germany

World Class production facilities and techniques

Absolute focus on quality by our employees at every Stage of production

Manual, Hybrid and fully automated assembly systems

German engineering and ingenuity