The Best Micro Atx Case of 2023

【Door Opening Design】With the magnetic suction opening designed, the MOROVOL computer case is easy to install and remove computer accessories. The visual tempered glass on the side of the gaming case, is exquisite and allows you to showcases gorgeous RGB lighting.

【SPACIOUS STORAGE INTERNAL】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports motherboards of Micro-ATX,ITX; Internal Bays: 2 x 3.5 HDD's and 1 x 2.5 SSD's.

【POWERFUL COOLING SYSTEM】2 MVP 120mm RGB Dual light loop LED Fans pre-installed in this pc gaming case;

【MESH FRONT PANEL】Both of the front panel and the top is made of heavy-duty metal mesh. They allow maximum airflow to provide cooling for your power supply and keep everything stable. Mesh design is not only dust-proof but also shows the fashion style.

【TOP I/O PANEL】2 x USB3.0 Port, 1 x HD Audio, 1 xMicrophone Jack,1 x Power,1 x Reset.

Mesh intakes large mesh intakes span each side of the front panel to provide additional airflow to system

Dual ARGB fans 2 pre-installed 120 millimeter ARGB fans can be managed by the motherboard connected by the included splitter to create a comprehensive ARGB lighting system

Tempered glass hardware custom-loop cooling or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel

Adaptable drive cage: The drive cage is movable able to shift toward the front to accommodate for PSU space backwards to provide additional radiator space or even completely removed

Versatile cooling options support for a total of 6 120 millimeter fans and front top and rear radiator placement ensures that you don’t have to compromise on performance

Mid Tower MATX PC Case C1: Large size 12.33*6.5*16.86 inch and 22L capacity, can be compared with Full Tower computer case

Compatible with ATX PSU: Support ATX/SFX power supply, mATX/dtx/itx motherboard, 2*2.5''HDD+ 2*3.5''HDD, 6 fans max for air and liquid cooling

Unique Bottom I/O interface Design: To keep the desktop clean and tidy, the I/O and wire ports set on the bottom, which is rare among the matx aluminum case

Special Space Dark Grey Color with one side tempered glass transparent design: ZZEW's special full aluminum alloy is oxidized into space gray color, and the whole side transparent design makes all accessories more dazzling and cool during operation, especially RGB fans

Hign efficient heat dissipation: The four side mesh hollow out design makes the heat dissipation effect of micro ATX C1, beautiful and efficiently at the same time. C1 is a rare model in ZZEW series with high cost performance and beautiful appearance

Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX)

Designed for use in either a vertical or horizontal orientation on the motherboard

Chamber concept design with optimized cable management space for small form factor builds

Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation

2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches

Includes 1x 200 millimeter Front Fan Pre installed, Optional Cooling Available

I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal

Edge to edge acrylic transparent side panel offers a full view inside

Body depth height: Can support normal size ATX power supply

Front magnetic design dust filter with open perforated front, top and bottom for high air performance

Extra space behind the motherboard tray for hidden cable management

Micro ATX – Elegant hairline surface and occupying little space. Small but attractive

Big area air circulation panel with two pre-installed fans, outstanding airflow Top panel with magnetic dust-proof net, easy to take on and off

Simple RGB mode - With 7colors, 3 lighting modes of switching RGB strip make the panel delicate Side panel with acrylic make the overall quality remarkable Performance and capacity of a full tower in a compact mid-tower size

With the soft and removable dust-proof net at the PSU, convenient to remove and clean Two 12cm black fans are pre-installed at front and rear Support for a total of 8 fans (Front 12cm*3 or 14cm*2 ,Top 12cm*2 or 240mm Water cooling ,Rear12cm*1,Inside 12cm*2)

2 x 3.5"HDD can be installed in the rear HDD cage SSD plates support up to 2 x 2.5" drives USB 2.0*2 / USB 3.0*1 / HD Audio*1 / mic*1 / Light control button Front Ports Caution: This case only fit with Micro-atx & itx motherboard. It can not fit ATX motherboard.

Minimalistic mesh design: Elegant design elements are applied to mesh for optimal thermal performance

Optimal thermal performance, the full mesh front panel and ventilated top panel provide a high potential for thermal performance

Flush Tempered glass Side panel design:The tempered glass Side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed

Graphics Card support up to 346 millimeter: Generous clearance space is provided to support the latest graphics cards

With/without ODD support, depending on preference, an odd version of the chassis is available; If an odd is not preferred, a cleaner appearance and more cooling options on the top and front panels are supported

Headset jack the single 4 pole headset jack features both Audio and microphone capabilities simultaneously so that separate jacks are not needed

Cable management high quality rubber grommets are paired with 22 millimeter of clearance behind the motherboard TO offer ample room for cable management

Internal dimension - 9.6” X 9.6”

[SLIM AND COMPACT] - Full metal construction around the body with sleek front panel design, demonstrating a slim and compact design style

[4mm THICK TEMPERED GLASS PANEL] - Tool free door lock design, which s durability and style

[BUILT-IN WINDOWED POWER COVER] - Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables

[DUST REDUCTIONS] - A handy magnetic fan filter on the top and on the base of the chassis to help dust filtration and particulate protection

[DRIVE BAY] - 2 x 2. 5"/3. 5" with HDD Rack plus 2 x 2. 5" with HDD Bracket behind MB Tray

One 120mm Rear Fan Pre-installed

Supports Mini ITX, Micro ATX Motherboards

I/O PORT - USB 3. 0 x 1, USB 2. 0 x 2, HD Audio x 1, Reset Button x 1

Max CPU Cooler Height: 165mm / Max VGA Length: 330mm / Max PSU Length: 160mm

Dimension – 16. 18" x 8. 66" x 17. 36" / 13. 45 lbs

【Outstanding Airflow】Large front panel metal mesh and 5pcs 120mm MUSETEX ARGB fans are pre-installed for the case to provide lighting and excellent airflow at the same time,keep cooling with the case.This widest case in all micro cases，the width of this case is 230mm, there is still 38mm distance between GPU and the front glass panel after installing vertical graphics card, which will keep your system cooling.

【Multiple ARGB Modes】 Button control has 19 lighting modes ;Motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only)

【More Space】MUSETEX MK7 series has 4MM Tempered Door Opening Design and Mesh Front Panel,make it easy and free to disassemble and install computer accessories, and allow maximum airflow to provide cooling for your power supply. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；Micro ATX/ITX motherboard; 120mm/240mm/280mm water cooling; maximum length 340mm GPU（installing vertically or horizontally）; maximum length 180mm CPU air cooling; maximum length 200mm PSU.

【Dust-proof Design】The case is equipped with 2pcs dust filter , and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom.

【TOP I/O PANEL】2 x USB3.0 Port, 2 x HD Audio, LED Button, Power,Reset.

Motherboard Compatability: Micro-ATX/ Mini-ITX （Not for ATX motherboard）

Mesh Front Panel with Built in Blue LED Strip

Compact Micro ATX Form Factor Design with Full Length PSU Cover

Ideal for AIO Solutions up to 240/280 millimeter

I/O Port: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1

2 Hidden 2.5 inches plus 2 Hidden 3.5 inches Drive Bays