The Best Mid-tower Computer Cases of 2023

Streamlined high-airflow design; Two preinstalled Fractal Design Dynamic X2 GP-12 120 mm fans deliver optimum airflow with minimal noise

The performance and capacity of a larger tower in a remarkably compact mATX designed tower

Angular mesh front panel maximizes air intake

Tinted tempered glass side panel for a clean looking exterior with full interior visibility

Distinctive styling with stealthy black-on-black aesthetic

F-LUX Platform: Advanced case structure for excellent airflow + 5 x 120mm fans included

ARGB & PWM Fan Controller

Provide massive airflow to your components with room for up to 9 x 120mm fans

Supports a high-end GPU and provides the best cooling for it

Ready for a radiator up to 360mm in front, 360mm on top & 120mm in rear

With room for 2.5” SSDs: 3 & 3.5” HDDs/2.5” SSDs (convertible): 3/2

I/O panel dust plugs included

Plenty of space for clean cable management

Motherboard Support: Up to ATX

【Outstanding Airflow】 6 pcs 120mm ARGB fans are pre-installed in MUSETEX PC gaming cases to provide lighting and excellent airflow at the same time, keep cooling with the case. Motherboard Compatability: ATX / Micro-ATX / Mini-ITX.

【Multiple ARGB Modes】Remote Control: G05MN6 Case is equipped with a unique music panel, its lighting can be changed with the rhythm of the music, can quickly adjust the ARGB lighting, speed, and mode; Button control has 19 lighting modes; Motherboard control: it connected to the 5V 3PIN header on the motherboard, the motherboard control can be unlimited ARGB fans modes (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only)

【More Space】 MUSETEX G05 series has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install ATX/Micro ATX/ITX motherboard; 120mm water cooling; maximum length 380mm GPU; maximum length 160mm CPU air cooling; maximum length 245mm PSU (removable hard disk holders can be realized)

【Dust-proof design】 The case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case; other is PSU dust filter easy to install and cleaning on the bottom.

【TOP I/O PANEL】Musetex mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power/Reset.Our USB cable is shielded wire so that you can transmit data without interference.

Full-metal front panel with Ultra-fine Performance Mesh that combines high airflow performance and excellent dust filtrations thanks to its ultra-fine perforations of only 1mm.

Integrated D-RGB lighting that is easy to control and software-free.

Perfect chassis size for high-end gaming systems with support for (E)-ATX (up to 280mm) motherboards, front 240/280mm and top 240mm radiator, full-length GPUs and vertical GPU ready with the optional Vertical GPU Bracket.

Expand and synchronize the D-RGB lighting compatible motherboards and D-RGB products.

Easily accessible front I/O featuring 2x USB 3.0, Microphone, Headphone, Power button, and D-RGB Color and Mode buttons.

3 ARGB Fans Included : 2 x 140 mm ARGB fan in front & 1 x 120 mm ARGB fan in rear.

Tempered Glass Side Panel : Tempered Glass Side Panel can enjoy the simple and clean black appearance without losing the gorgeous RGB effect which inside your rig.

High Efficiency Cooling Design : 2 x 140mm ARGB fan which installed in front of the case, effectively drive the air convection to achieve awesome cooling effect for your rig.

Grid Front Panel Design : The staggered grid design improves the overall appearance design sense and achieves the ultimate efficiency and beauty on the basis of keeping the heat dissipation.

MOBO Support : ATX, micro-ATX, ITX, Provide a variety of MOBO size options at 390 mm x 210 mm x 485 mm Case's size.

Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC.

The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.

Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling.

A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height).

Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.

【Outstanding Airflow】6pcs 120mm MUSETEX ARGB fans are pre-installed for the case to provide lighting and excellent airflow at the same time, keep cooling with the case.

【Multiple ARGB Modes】 Button control has 19 lighting modes; Motherboard control: it connected to the 5V 3PIN header on the motherboard, the motherboard control can be unlimited ARGB fans modes (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only)

【More Space】MUSETEX G05 series has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard; 120mm water cooling; maximum length 380mm GPU; maximum length 160mm CPU air cooling; maximum length 245mmPSU (removable hard disk holders can be realized)

【Dust-proof Design】The case is equipped with a 2pcs dust filter, and the top magnetic strip dust filter protects the case; the other is a PSU dust filter easy to install and cleaning on the bottom.

【TOP I/O PANEL】Musetex mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that you can transmit data without interference.

Fully meshed front panel for superior airflow

Supports a 240 mm water cooling radiator or two 120 mm fans on the right side or top of case

Supports up to three SSDs -two on the tool-less 2.5 Inch bracket and one at the bottom of the HDD cage

Supports a 120 mm water cooling radiator at the rear

Includes two Cooler Master XtraFlo 120 mm fans (non-LED) arranged for optimum airflow with support for up to 8 fans total

Three dust filters (top, right side panel, and power supply) for easy maintenance

Two USB 3.0 SuperSpeed ports in front

Package weight : 15.3 Lbs

5mm thickness tempered glass Side window panel

Country of origin : China

Support water-cooling front-240mm top-240mm rear-120mm

Motherboard Support: Up to ATX

3 x 120 mm ARGB fan in rear included

Graphics Card Support: Up to 310 mm

PSU Support: Up to 185 mm(with HDD) Up to 310 mm(without HDD)

Tempered glass Side panel