The Best Northbridge Heatsinks of 2023

20x20x1mm Soft Thermal Conductive Pads

Material: Conduction Silicone,Color: Blue

Thermal Conductivity: 1.2(W/M-K),Tensile Strength: 12Kgf/cm2

Breakdown Voltage: 4.5KV,Soft,good malleability,with a little viscosity.

Package Includes:30PCS x thermal pad

Excellent surface flatness minimizes the interface between heat source and heat sink.

Formed of pure copper to enhance thermal conductivity.

Multiple push pin locations for universal mounting on various board assembly (hole to hole distance: 53mm to 59mm)

Thermal Conductivity: 1.5w/m-K,Material: conductive silica gel, Package include:100pcs 20x20mmx1mm Thermal Pads.

Note:It's sticky thermal pads, the surface of many products is smooth, vertical or inclined, you can choose our sticky thermal pads, it can stick together to ensure that it will not move or fall off.

Because the back of the conductive thermal pads is sticky (we use high viscosity double-sided adhesive tape on the back), it will be a little difficult to take the white paper off. You just need to gently pick it out with your finger from the edge of the pads, to separate the white paper from the double-sided adhesive tape. It takes a little patience and I'm sure you can do it .

These pads are for lower heat producing processors(raspberry pi,ps4 etc), memory chips and IC's. These pads are NOT meant to handle the high heat transfer a standard CPU or GPU needs.you can use this as a cooling pad for chipsets around the cpu.

Use experience: the effect of using on CPU is not very good but the heat dissipation on North/South Bridge is good. Experiment: notebook bare plate power test, when it is not convenient to install heat sink, use the thermal conductive pads attach to the North/South Bridge and CPU, you can turn on for a few minutes. the above tests and suggestions are carried out in the environment of security test, please do not imitate.

3 piece 100x100x1mm Soft Thermal Conductive Pads, Color: blue

Material: Conduction Silicone

Thermal Conductivity: 1.5w/m-K,Tensile Strength: 12Kgf/cm2, in -50 ℃ - 200 ℃ will not melt.

Breakdown Voltage: 4KV,Soft, good malleability, with a little viscosity.

Easy to install, you can select most suitable thickness and cut the required sizes.

Made of durable aluminium to ensure strength and quality

Long service life, High performance, Efficient heat dissipation

The Northbridge chipset can be cooled to an optimal temperat

Wide application for the south and north bridge with screw hole distance of 45mm-85mm

Package Included: 1 x Northbridge Heatsink

Made of high quality Aluminum, good thermal conductivity.

Size: 38mm x 38mm x 10mm (1.49 x 1.49 x 0.39 inch) (L*W*H), please make sure that the size of the heat sink fits that of your component.

When you use the aluminum heat sink,it can reduce the risk of hardware failure due to overheating.more safety for your electronic devices.

Improve the environment (temperature around the device, as well as the flow rate of the air), reduces the power loss and extend the service life for your electronic devices.

Can be applied with other devices for cooling computer, Power Transistor, IC Chips, MOSFET SCR, Southbridge , Northbridge etc.

Work in peace without noise, it provides a quiet environment for you.

2 direct contact heatpipes for high cooling performance and efficient heat dissipation.

Support 8cm fan, you can install it to improve the heat dissipation effect.

Suitable for Northbridge/Southbridge/Motherboard.

Size: 86mm x 34mm x 122mm/3.39" x 1.34" x 4.80" (Approx.)

【40mm fan PRODUCT PARAMETERS】Dimensions: 40x40x10mm | 1.6 x 1.6 x 0.4inch | Voltage: DC 12V | Current: 0.06Amp | Power: 0.7Watt | Speed: 5500RPM | Airflow: 6.6CFM | Noise: 25dBA | Bearing: Sleeve | Long life with 35,000 Hrs

【12v fan WIDELY APPLICATIONS】It is best for cooling the hottest & Narrow spaces | Circulating and exhausting stuffy air | Designed for projects that requires cooling or ventilation | Or as an replacement fan for various products | Allows the fans to be laid flat or stand upright.

【12v dc fan 3-PIN PLUG】RED Wire is Positive(＋) | Black Wire is Negative(﹣) | Yellow Wire is FG Function | The Fan Wire Length is 10inch.

【computer fan TWO WAY INSTALLATION】Blow warm air out of the case | Draw cool air into your case | Push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of the case | Rotation Direction: Counter-clockwise.

【12v computer fan COMPONENTS & WARRANT】It can be easily mounted with the included metal protective grill and hardware. | 12-month warranty and friendly customer service.

88pcs small to medium sizes of heat sink

20pcs 7x7x6mm, 20pcs 9x9x5mm, (L*W*H)

10pcs 8.5x8.5x8mm, 10pcs 10x10x10mm, (L*W*H)

6pcs 11x11x5mm,6pcs 14x14x7mm, 6pcs 15x15x6.5mm , 6pcs 20x20x6mm, (L*W*H)

2pcs 22x22x10mm，2pcs 28X28X8 (L*W*H)