The Best Oil Additives of 2023

Affordable Solutions

Not designed for passenger car use

Exclusive blend of extreme pressure additives

Excellent for flat tappet camshafts or as an additive

Melts ice and lowers pour point in fuel tanks

Controls waxing and jelling

Eliminates water and dissolves sludge

Cleans strainers, filters and nozzles

Reduces soot by 50percent and eliminates bacteria breeding grounds

Motor oil additive - Liqui Moly MoS2 anti-friction (300 ml. Can)

Forms High load-bearing film of lubricant on all friction surfaces

You will be surprised at how much better your engine sounds and how controlled it will be even at very high RPM

Flash point: 181.0 degrees_celsius

Extends oil and engine life

Virtually eliminates dry starts and excessive wear

Raises Oil Pressure

Will not sludge or varnish

Lowers engine temperature

For use in any engine, gasoline or diesel

This premium quality synthetic blend works with all types of motor/engine oil including regular petroleum, high mileage, synthetic blends and fully synthetic formulas

Works in all gasoline and diesel engines including turbocharged, Eco Boost, hybrid and even racing engines, including 3, 4, 5, 6, 8 and 10 cylinder engines in all cars, trucks, vans and SUV's

Can also be used in heavy-duty applications as well as tractors, boats, RV's, motorcycles (including wet clutch), ATV's, lawn equipment

In most cases the oil leak issue will be repaired with a single dosage. However, for best results and to prevent the problems from reoccurring, use with every other oil change, or once per year

Use 1/2 bottle for smaller systems (3. 5 - 4. 4 quarts of oil), in larger systems use 1 bottle for every 6 quarts, in small engines use approximately 3oz to every quart of oil

Two 4 fl. oz. bottles of REV X High Performance Oil Additive in our stiction fix retail box. Will treat up to 12 quarts of oil.

Quiets engine noise while cleaning harmful deposits, varnish and sludge in all engines. Reduces friction by creating a microscopic friction reduction layer on all treated components to reach areas standard oils can not.

Removes stiction, common in HEUI Injectors, without using harmful and dangerous chemical strippers.

Extends the service life of all synthetic, semi-synthetic, and mineral based oils providing a reduction of wear of all treated engine components.

Greatly improves or eliminates cold start issues in all diesel engines.

Prevents camshaft wear

Reduces piston scuffing

Increases engine life

Makes newer oils work in older engines

Boosts Zinc and Phosphorous Levels

Treats 6 Quarts - The most concentrated form of ZINC (ZDDP) Additive available. 3000-3200 parts per million when blended with 6 quarts of oil.

Provides Maximum Protection For Engine Break In.

Protects Flat Tappet Camshafts (Hydraulic or Solid).

Provides increased lubrication of Roller Lifter Bearings (Hydraulic or Solid).

Provides Maximum Metal To Metal Protection.

Chlorine Free, Water-Soluble Oil

All Metals

Non-Chlorinated

16oz AR9100 Friction Modifier - treats one Power Stroke

Fixes 6.0L and 7.3L Power Stroke cold start injector problems

Reduces wear and extends component life

Reduces engine noise, vibration and heat

For all diesel and gasoline engines, gearboxes, hydraulics, differentials and power steering systems