The Best Paintball Fill Stations of 2023

50 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector

Dual Heavy Duty 1/4 Turn Valves

Heavy Duty Fill Valve W/On/Off

This fill station will fit any US threaded bulk CO2 tank.

SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.

SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.

45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.

UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.

APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.

Easy to read pressure gauge

Inflation Valve Interface Type:1/2 Quick Insertion

Measuring Range:0-4500(PSI)

Durable brass fittings

Packages: 1 x Refill Charging Adaptor

Universally Fit- Standard CGA-320 adaptor fits most large co2 tanks,another G1/2 adaptor compatible with most standard US co2 paintball tanks,and allows normal operation without any permanent changes.

Stainless Steel Material Support High Pressure- The 36 inch stainless steel braided hose support 6000 psi high pressure with spring protector,and the surface is polished plating, very strong and beautiful.

Save Money on Refill- This system allows you to fill paintball co2 tanks from a larger co2 canister which has a CGA320 outlet valve.

Wide Applications- It can connect a large CO2 tanks, like 5lb, 20lb or 50lb commercial CO2 tanks, can fill 12oz, 16oz, 20oz, co2 paintball tanks.Suitable for CGA-320 of these countries-United States, Canada, Brazil, Colombia, Philippines.

CO2 Dual Valve Paintball Tank Refill Station for 12oz, 16oz, 20oz, 24oz. Tanks etc.

40 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector + Dual 1/4 Turn Valves

Heavy Duty Fill Valve w/ On/Off

Compatible with All Standard US CO2 Paintball Tanks

Standard SCUBA Yoke Adapter Pocket, compatible with standard K-Valve, J-Valve and H-Valve .

8mm standard female quick-disconnect coupling plug, 24 inch stainless steel spring protector hose.

Can also work with PCP air rifles with compressed air from a scuba tank and fill paintball, HPA co2 tanks.

New double o-rings design, longer service life, working pressure up to 4500 psi.

Simply connect each fill adaptor to the male air tool fittings, female quick-disconnect coupling with precision bearing steel ball, high pressure resistance，this is one of the needed items to have in your parts kit.

✅►【Application】: Fill station refill charging adapter for paintball is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.

✅►【Parameter】：With 45mm diameter glycerine filling gauge, 0~ 40mpa, max pressure 6000psi fill station designed for paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.

✅►【Knob type exhaust valve design】：With knob type exhaust valve make the air outlet smoothly, which is safe to use operate and durable to use.

✅►【Easy to read】：CGA347 female thread with valve gauge, paintball charging adapter inflators are easy to read pressure gauge ensure the convenience and reliability.

✅►【Satisfied guarantee】：We provide lifetime money back guarantee, for any reason you're not completely satisfied, you can ask for a replacement or full refund.

Max to 3000psi working pressure.

1/8 inch NPT female side hole threaded with 8mm quick plug and gauge

G1/2-14 ( 0.825-14NGO ) female bottom threaded, screws onto any depressed pin valves

Heavy duty aluminum construction, lightweight and durable design, corrosion resistant.

Paintball UFA fill adapter On/Off, perfect for remote systems or CO2 fill stations, release air from cylinders.

Durable brass fittings.Easy to read pressure gauge

Inflators are designed for convenience and reliability

Outlet Thread:8mm;Interface Type:1/2 Quick Insertion;Measuring Range:0-4500(PSI);60cm Microbore Hose

The 4 5000 PSI Filling Station is designed to fill air rifles,it is very suitable for outdoor use

Our products are shipped from US warehouses.If any problem, please feel free to contact us. We will service you within 24 hours

Dual gauge design:one gauge indicate tank pressure,the other gauge indicate the inline pressure

Max working pressure:4500psi with 6000psi burst disc,

Application:assembled in carbon fiber tank,suitable for pcp air gun or paintball tank refilling

Thread:7/8-14UNF thread,always check your tank thread before purchasingif you do not know,please contact us

It is not a regulator,it is pcp air gun or paintball tank fill station