The Best Portable Drill Guide of 2023

Fits all 1/4-inch or 3/8-inch drills, perfect for horizontal, straight or angled drilling, drilling on the edge of a board or on round stock

Guide-bars themselves have springs for a quick return when doing repetitive drilling

Depth Stop & Large Handle : Adjustable depth stop and spring action control of the head. Drill adapter itself slides up and down on guide-bars, whether it’s on the wall, on the ceiling, at a slant, or in round materials, exact drilling is easy

Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place, to accommodate drilling any round stock up to 3 inches in diameter

Satisfaction guaranteed: 90 Days money back guarantee, so there is no risk for you to try, we value our every customer and we always try our best to improve better customer experience.

17 drill sizes, from 1/8" to 3/8", in 1/64" increments

Use on flat surfaces, round parts, and corners

Special nickel alloyed steel heat treated for durability

Non-plated material with light oil coating to prevent rust

Alignment marks on guide to line up on center

Perfect for straight or angled drilling, drilling on the edge of a board or on round stock

Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key

Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base

Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter

Adjustable depth stop and spring action control of the head

JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig

BORING, IN A GOOD WAY - Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments

STANDARD SIZE - 3/8" shaft and chuck are used for this quick tool conversion while it works smooth with no wobble

PRECISE USE – A reliable depth stop is included to ensure each task goes as expected

ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary

The main body is made of lightweight and durable die-cast aluminum.

The base has scribed lines to make it easy to find the center

The depth of the hole can be freely determined by adjusting the position of the stopper.

Thumbscrews are large in diameter and easy to tighten.

※This product is the successor to the K-801. 【Product Details】 ・Chuck: 10mm drill chuck ・Shank: 10mm/round/three-sided ・Total length: 260mm ・Stroke: 130mm ・Weight: 1,350g

BUILT IN PROTRACTOR- drills accurate right-angled or variable-angled holes with the built-in protractor scale

ADJUSTABLE- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position

POSITIVE STOP- built-in depth stop for accurate drill depth

WORKS WITH DOWELS- v-groove for positioning round stock, pipe or tubing. A slide lock facilitates sanding and buffing

STABLE- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing

21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64".

Covers all tap drill sizes for tap sizes: 10-32 down to 0-80.

The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts!

Heat treated for durability. Side alignment marks allow accurate hole locating.

100% Made in U.S.A.

Drill guide that can be used in horizontal, vertical or angle positions

Guide-bars themselves have springs for a quick return when doing repetitive drilling

Drill adapter itself slides up and down on guide-bars

Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place

Fits all 1/4-inch or 3/8-inch drills

Pocket hole jig 6061 aluminum alloy body,not rust lightweight and strong .With keyed chuck, tapered depth control shaft and limit ring, spring return, reversible chuck bracket, built-in V-groove, alignment and adjustable fence

The chuck carrier has a 1 drill bit capacity, but if you remove it and reverse it, you can fit bits up to 2wide..

A v-groove in the base allows for easy centered drilling of round stock such as wood dowels.Drilling Hole Guide with a clear and precise scale, adjust the scale according to the thickness of the wood, accurate alignment .

Drilling Locator Guide with a quick gripper,fast and firm clamping .With a 1/4 inch hexagonal shaft, it can be used with cordless and corded drills and impact drivers.

Doweling jig with a larger chip evacuation,faster and smooth chip removal, drilling is more labor-saving,improve work efficiency .Woodworking Locator kit used for edge,surface,T-shaped,and L-shaped jointsSuitable for quick connection of furniture, woodworking DIY, etc

JIG IT Drill Guide Ensures perfectly aligned holes every time.

Can be used with a drill press or a hand drill for perfect 90 degree drilling of clean holes.

Interior Diameter: 3-1/2" ; 2-1/2" High

Use with 3/8" Shank Diameter Drill Bits

Drill Guide must be used with Long Shank Forstner Bits and associated 3/8" Stop Collar (each sold separately).