The Best Powersports Tie Rods of 2023

Replaces the smaller weak OEM Tie Rods and Ends with 12mm Ends and 5/8 Inch Tie Rods

Tie Rods Are Constructed Out Of 5/8 Inch 4130 Chromoly Aircraft Grade Steel

Durable and Tough Element Resistant Silver Hammer-Tone Powdercoated

Virtually Eliminates Bending Tie Rods Which Is A Problem On This ATV.

These Tie Rods Have A Lifetime Structural Warranty.

Replaces Weak OEM Female Ends with 12mm Male Tie Rod Ends

Tie Rods Are Constructed Out Of 5/8 Inch 4130 Chromoly Steel

Durable and Tough Element Resistant Silver Hammertone Powdercoating

Virtually Eliminates Bending Tie Rods Which Is A Problem On This ATV.

These Tie Rods Have A Lifetime Structural Warranty.

Specs: Tie Rod End Kit

Meets or Exceeds OEM Specs for Fit and Performance

Compatible With/Replacement For: Arctic Cat Wildcat 1000 2014, Wildcat 1000 Late build 2013, Wildcat 4 2013-2014, Wildcat 4 LTD 2014, Wildcat 4X 2014-2015, Wildcat GT 2012-2013, Wildcat LTD 2013-2014, Wildcat X / LTD 2014-2016, Wildcat X 2013, Wildcat X EPS 2018-2019

1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement.

100% New aftermarket Tie Rod End Kit built to meet OEM specifications

Fits: 2010-2014 Polaris Rush 600, 2011-2014 Polaris Rush 800

Fits: 2011-2015 Polaris Pro RMK 800, 2011-2016 Polaris RMK 800, 2012-2014 Polaris Pro RMK 600, 2012-2016 Polaris RMK 600, 2012-2014 Polaris RMK Assault 800, 2015 Polaris Assault RMK 800

Fits: 2011-2015 Polaris Switchback Assault 800, 2012-2016 Polaris SwitchBack 600, 2012-2016 Polaris SwitchBack 800, 2014 Polaris Swtichback Assault 600

Fits: 2013-2019 Polaris Indy 600, 2014-2016 Polaris Indy 800, 2015-2017 Polaris Indy 550

Fits: 2017 Polaris Voyageur 550

Kit contains all of the components required to properly rebuild the swing arm bearing assembly.

POM composite washer bearings replace thruneedle washers fincreased service life and superiresistance to water and dirt.

All metal bushings are case hardened and plated to prevent wear and corrosion.

Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground.

★【REPLACEMENT FOR】50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Quad 4 Wheeler;

★【SIZE】Length:330mm/13.0",Installation screw diameter:10mm/0.39";(As the picture shows)

★【EASY TO INSTALL】Made of high quality metal,high hardness,firm,corrosion resistant and durable,long service life.

★【NOTE】Please verify model number and size prior to ordering to ensure this is the correct part;

★【WOOSTAR CUSTOMER SERVICE】Always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order;Be happy Online in your time.

Specs: Tie Rod Upgrade Kit

Meets or Exceeds OEM Specs for Fit and Performance

Compatible With/Replacement For: Honda TRX500FA 2001 - 2014, TRX500FE 2005 - 2013, TRX500FGA 2004 - 2008, TRX500FM 2005 - 2013, TRX500FPA 2009 - 2014, TRX500FPE 2007 - 2013, TRX500FPM 2008 - 2013, TRX500TM 2005 - 2006, TRX650 Rincon 2003 - 2005, TRX680 Rincon 2006 - 2019

1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement.

100% New aftermarket Tie Rod Upgrade Kit built to meet OEM specifications

Specs: Tie Rod Upgrade Kit

Meets or Exceeds OEM Specs for Fit and Performance

Compatible With/Replacement For: Can-Am Outlander 1000 DPS 2012-2018, Outlander 1000 EFI 6x6 2015, Outlander 1000 XMR 2013-2017, Outlander 1000 XT 2012-2017, Outlander 1000 XTP 2013-2017, Outlander 1000 XXC 2020, Outlander 500 STD 4x4 2013-2015, Outlander 500 XT 4x4 2013-2014, Outlander 650 6x6 2015, Outlander 650 STD 4x4 2013-2015, Outlander 650 XMR 2013-2015, Outlander 650 XT 4x4 2013-2014

1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement.

100% New aftermarket Tie Rod Upgrade Kit built to meet OEM specifications

100% Fitment Guaranteed ✔️

Complete Tie Rod

Heavy Duty Solid Tubing

Stock Length Replacement