The Best Preamp For Turntable of 2023

✓ DESIGNED FOR VINYL – Cambridge Audio’s Alva Solo is a dedicated moving magnet phono preamp designed to give you a superb sonic experience from your favorite record collection using its switch mode power supply and surface mounted circuit board.

✓ ATTENTION TO DETAIL – The Alva Duo's switch mode power supply and surface mount technology delivers short signal paths and a faster response with precision and lower background noise so you don't hear a hum over the vinyl's low-level signals.

✓ SUBSONIC FILTER & BALANCE CONTROL – The Alva Solo will even work if your vinyls are a little worse for wear. The subsonic filter and balance control eliminate low frequency rumbles from imperfections in your vinyl for an accurate soundstage.

✓ GREAT ADDITION TO ANY AMP – The Alva Solo is a perfect for your amp that doesn’t have a phono preamp built in or a great upgrade for your amp with one built in. You will notice more smoothness and warmth with less distortion and background noise.

✓ TECH SPECS - MAX POWER CONSUMPTION 10W, GAIN @ 1KHZ 39dB, NOMINAL OUTPUT 300mV, SENSITIVITY FOR NOMINAL OUTPUT 3.35mV, EQUIVALENT INPUT NOISE ~0.09uV, RIAA CURVE ACCURACY +/- 0.65dB 30Hz-20kHz, DIMENSIONS (H X W X D) 1.9x6.9x5.2”, WEIGHT 1.5lbs

Tonearm and cartridge completely setup at the Factory for simple installation at home

8mm thick bead-blasted glass platter

Premium mechanical parts used throughout for smooth, precise playback of records

Precise, electronic selection of 33 1/3 and 45 RPM playback Speed

Built-in, bypassable phono preamp for connection to any audio system

connector type: RCA

power source type: Corded Electric

connectivity technology: Wired

Dual RCA-type inputs

Dual RCA-type outputs

Ground terminal

Power: 12V DC (Adapter included)

Dimensions: 1.75 H x 4.2 W x 3.5 inches D (44.5 x 107 x 89mm)

【Converts Phono Signals】: Compact ultra-low noise phono turntable preamp that converts phono signals to line level signals. Designed with grounding post to protect your turntable.

【Features Power Switch & 3.5MM Headphone Output】: The unique power switch button design is very convenient to use. You can enjoy high-quality music with headphones through the 3.5 mm headphone output. Note: RCA line output and AUX headphone output can be output simultaneously.

【3.5MM / RCA Output】: BOX X1 supports MM turntable input, 3.5MM headphone output and RCA line output for powered speakers. Note: You can connect a power amplifier through the 3.5MM or RCA output, then connect the passive speakers.

【MM Phono Preamplifier & DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV, Frequency Response: Standard RIAA. Equipped with DC12V high quality power supply.

【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, 18-Month global warranty, and 24-Hour quick customer service.

T3 phono preamp is designed for home MM(moving magnet) turntable record players to convert phono signals to line level signals. It is only a preamp, which needs to be used with amplifiers or active speakers.

With volume control, higher amplification times can make best use of your record player performance.

Adopting pure copper GND and gold-plated RCA terminals, low-noise integrated circuits and high quality components to remove low frequency noise and ensure clear sound quality, bringing HiFi listening experience.

Mini size with attractive appearance, power switch with red indicator makes it fashionable, metal aluminum case can prevent vibrations and electromagnetic interference, very suitable for home and desktop audio system use.

❤Tube MM Phono Preamplifier: Converts phono signals to Line Level Signals with low-noise integrated circuits and high-quality components to remove low-frequency noise ensure clear sound quality. Designed with grounding post to protect your turntable.

❤Three switchable gain modes: 39, 42, 45 dB. Adjustable gain levels to give you customizable control and outstanding compatibility. Entry-Level high-end analog sound and top-notch circuitry for an unbeatable low cost.

❤Tube Preamplifier: It's also a tube preamp with 3.5mm AUX Input. Designed and assembled by Fosi Audio from high-quality components. Great warm, smooth-sounding.

❤Applicable vacuum tube model: 6K4/6J1/6J4/GE5654/6AK5/66*In vacuum tubes, etc. You can replace the vacuum tubes to DIY your stereo system. Different tube with different sound.

❤What You Get: Box X2 phono preamp x1, Vacuum tubes x2, RCA cable x1, power adaptor x1, user manual x1, 18-Month global warranty, and 24-Hour quick customer service.

UNCOMPROMISED PHONO AMPLIFICATION AND EQUALIZATION - Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy frequency response to faithfully reproduce the original recording to the RIAA standard

SOPHISTICATED CIRCUIT DESIGN ENGINEERED WITH PREMIUM COMPONENTS - High accuracy components, low noise power supply, and low impedance output stage achieve greater RIAA specification, gain performance and lower distortion

VIVID STEREO SOUNDSTAGE - Utilizing individual left and right channel OP amps provide optimal channel separation and virtually no crosstalk during signal reproduction and amplification stages

LOW FREQUENCY RUMBLE FILTERING - This selectable high pass filter rolls off the low end frequencies below 20Hz. This slow gentle roll off is helpful to reduce subsonic resonant feedback and noise when listening at loud volumes

PROTECTED FROM ANY ELECTRONIC INTERFERENCE - Internal metal shielding enclosure to block electro-magnetic interference and electronic noise

COMPACT DESIGN fits on your bookshelf, desk, table so you can connect your turntable to your stereo receiver, speakers, or other audio device in any spot | LIGHT INDICATORS FOR SIGNAL AND SIGNAL CLIP

IMPROVED, HIGH-END CIRCUIT now converts turntables phono sound quality to line level for less distortion with better sounding audio and volume

RCA & DIN CONNECTION hooks up to record players for smooth audio with vintage records | PLUG IN YOUR HEADPHONES to the 1/4 connector to the headphone port (use the monitor level knob to adjust volume)

EASY TO SET UP OUT OF THE BOX for a simple hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time | SWITCH OFF THE POWER BUTTON when the pre amp is not in use

RIAA EQUALIZATION boosts the volume signal for balanced, clear audio | FILTER BUTTON rolls off the low end and helps eliminates rumble | BACKED BY 3 YEAR MANUFACTURER'S WARRANTY

✓ DESIGNED FOR VINYL – Cambridge Audio’s Alva Duo was designed to give you a superb sonic experience from your favorite record collection using its state-of-the-art switch mode power supply and a new surface mounted circuit board.

✓ ATTENTION TO DETAIL – The Alva Duo's switch mode power supply and surface mount technology delivers short signal paths and a faster response with precision and lower background noise so you don't hear a hum over the vinyl's low-level signals.

✓ SUBSONIC FILTER & BALANCE CONTROL – The Alva Duo will even work if your vinyls are a little worse for wear. The subsonic filter and balance control eliminate low frequency rumbles from imperfections in your vinyl for an accurate soundstage.

✓ HEADPHONE AMPLIFIER – Cambridge added a unique 6.35mm headphone jack directly into the phono stage so you can listen in private. The integrated headphone output also means no need to turn on your amplifier just to power your headphones.

✓ TECH SPECS - MAX POWER CONSUMPTION 10W, CARTRIDGE SUPPORT Moving Magnet | Moving Coil, GAIN @ 1KHZ MM: 39dB | MC: 60dB, NOMINAL OUTPUT 300mV, SENSITIVITY FOR NOMINAL OUTPUT MM: 3.35mV | MC: 305uV, DIMENSIONS 1.9" x 8.5" x 6.2", WEIGHT 2.1lbs

CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms

LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference

CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more

SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs

1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee