The Best Pressure Switches of 2023

Pressure Switch - Water or Air

Pressure Switch used to control electrically driven motors

Diaphragm Actuated

Low Pressure Cut Off - operates approximately 10 psi below cut-in

Designed for use with Ingersoll Rand reciprocating air compressor models: SS3 and SS5

100 psig cut-in, 135 psig cut-out

NEMA type 1 enclosure

Country Of Origin: United States

Model Number: PSW-340

Item Package Dimensions: 6.0" L x 4.0" W x 4.0" H

Item Package Weight: 3.0 oz

✅ [Size]--6.3 mm unloader valve connection, 1/4 inch NPT Female connection. Cut off pressure 95-125 PSI.With relief valve can avoid the overload operation of the air compressor.

✅ [Part number]--LF10-4H-1-NPT1/4-95-125.This pressure switch is designed for a single stage or two stage air compressor pumping up to 125 PSI.

✅ [More conveient to use]--The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports.

✅ [Intelligent handle design]--The handle can be used to cut off air compressor and 4-port base simply the mountion of exhaust valve and pressure gauge.This switch features a built-in On / Off metal lever and also a unloader located on the side of the switch.

✅ [More safer to use]-- This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi.

1/4-18 NPT Male Thread: Easy connection air tank, train horn pressure switch, air ride pressure switch

Turn on pressure below 70psi, Turn off reach 100psi; 70 psi pressure switch,100psi pressure switch

DC pressure switch:24v pressure switch,12v pressure switch, AC 110V 120V 240V air pressure switch.

Versatile Use air pressure switch: Such as for air horn /train, air tank pressure switch

Service life:100000cycles, long working life, please send email to the seller if any issue.

Square D brand Pumptrol air compressor pressure switch model 9013FHG12J52M1X 95-125 PSI with unloader control valve and On / Off switch.

This pressure switch is designed for a single stage air compressor pumping up to 125 PSI but can be adjusted anywhere from 70-150 PSI.

This switch features a built in On / Off metal lever and also a unloader located on the bottom of the switch.

The unloader is used to unload head pressure off the compressor pump for a load free start up.

Unloader Connection Port: 1/4" Compression Which Accepts 1/4" Outside Diameter Copper Or High Pressure Tubing

Pressure switch with 30-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached

Switch works with a 1. 5 hp or less pump, has an adjustable differential range of 15-30 psi, and has a cut-out range of 20-65 psi

NEMA 1 enclosure has a 1/4" NPSF internal fluid connection

Country of origin: United States

This is a Brand New Gas Furnace Air Switch

Top Quality Furnace Air Switch

Made in the U.S.A!

Fits 1 1/16" Switches Up To 2 5/8" Long, Found on Newer GM and Chrysler Vehicles.

Fits 1 1/16" oil pressure sending unit (gauge type), found on most all '91 and newer GM vehicles.

Also fits '87 and newer Chrysler vehicles with combination light and gauge oil pressure switches.

Use with 3/8" drive or 1 1/8" hex.

1/4-18 NPT Male Thread: Easy connectionair tank /train/air horn, air ride pressure switch(Please verify your current thread size before ordering)

Air Pressure Switch turn on if pressure below 90psi, turn off reach 120psi

DC pressure switch:24v pressure switch,12v pressure switch, AC 110V 120V 240V air pressure switch.

Versatile Use air pressure switch: Such as for air horn /train, air tank pressure switch

Service life:100000cycles, long working life, please send email to the seller if any issue.