The Best Pushbutton Switches of 2023

Action Type: Momentary

Poles: SPST

Rating Voltage: AC 250V/ 1A

Terminals: 2 Pins

Diameter of Thread: 6.9mm/ 0.27in; Diameter of Cap: 6mm/ 0.24in; Pin Pitch: 3mm/ 0.11in

12V waterproof push-button on-off switch with 4 "(10cm) wire leads

Single pole switch; Rubber boot unscrews for flush mounting applications (requires drilling 5mm "hole)

Carbhub 12V waterproof push-button on-off switch, ideal for any application requiring a waterproof on-off push button switch

Used for Motorcycle, Auto Car, ATV, or UTV electrical applications like lighting and accessories, works great for most DC electrical projects

Operation: Auto-lock; Operating Current: 3 (A); Rated thermal current: 6 (A); Contact resistance: 50 (Ω); Insulation resistance: 100 (MΩ)

Security systems 44 switch

Pushbutton

Rolling ball contactor

Country of origin: China

Latching maintained pushbutton power switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for auxiliary LED accent lights on truck beds, boat trims, sailboat masts, car underbodies, and motorcycles

This switch is constructed of non-oxidizing, corrosion resistant stainless steel. It has a protection rating of IP67 waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage

The switch and LED are separate. The LED can be on all the time or only when the switch is ON, depending on how you wire it

Installation: Cut mounting hole in the panel using a 5/8" drill bit. Screw the threaded "neck" of the switch into the panel cutout hole and secure it on the reverse side of the panel with the included metal nut. The included rubber O-ring may optionally be used for additional water resistance by placing the ring between the top of the neck (just behind the faceplate) and the front of the panel. Package includes switch, metal nut and rubber O-ring

Operation Type: Latching/Maintained (Push it, ON; Push it again, OFF); Max Switch Rating: 250V AC/DC 3A; LED rating: 12V DC 15mA; Panel Cutout Diameter: 5/8" (16mm)

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Stainless Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

IP65 Waterproof Push button switch with Stainless Brass Shell, can be used in ourdoor, wet or dusty enviroment.

12V Push Button Switch widely used on Car, Boat, Marine, Vehicle, Auto, Truck, Househood, Coffee Machine, industrial equipment, Medical Equipment to Control LEDs and Circuit.

[Brand New Push Button Switch] Rating: 5A 12V DC; Mounting Hole Size: 0.5" (12mm); Operation Type: Latching; Push it, ON; Push it again, OFF. Contact Configuration: 1NO 1NC. IP65 waterproof protection can be used in wet or dusty environments.

[Ring Blue LED Light] Latching pushbutton switch use pole-less lamp beads. Bright and comfortable lights plus a metal appearance make the switch very cool. The work-life of the led light is more than 40,000 hours.

[EASY TO INSTALL] Round latching switch with screw clamp type terminals to make fitting very easy. There is a wiring instruction in Image 3. The switch and LED are separated, LED can be on all the time or only on when the switch is on, depending on how you wire it.

[WIDELY USE RANGE] You can use this push button switch to replace the light switch or other control switches in the cars/ boats/ trucks. It can also be used as a doorbell, entrance guard push button switch in the outdoors, or a replacement switch of household Appliances, such as table lamp switch, PC switch, Audio switch.

[SATISFACTION SERVICE] If you're not COMPLETELY SATISFIED with Linkstyle pushbutton switch, please feel free to contact us without hesitation, we provide a free return, a free replacement, or a full refund.

Waterproof Push Button Boot

12" Wire Leads

Rubber boot unscrews for flush mounting applications (requires drilling 3/8" hole)

Ideal for any 6-14 volt DC application requiring a waterproof on-off push button switch

Operating Current: 6 (A)

Operation : Push-On, Push again-Off, SPST switch

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

Light Switch with Black Rubber Boot (4.5 inch wire leads)

Waterproof switches perfect for Automotive, Motorcycle, ATV, UTV ,RV electrical applications like LED light and accessories,DIY projects,replacement switches.

Latching Push Button Switch: Push it - ON, Push it again - OFF

Stainless Steel Shell High Round Pushbutton Switch: 16mm 1/2" Mounting Hole, durable for a longer lifetime can up to 500,000 cycles.

Blue Push Button Switch- The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it.

Easy to Install - Round latching switch with screw clamp type terminals to make fitting very easy, 4 pins, multi-type wire connection.

Wide Application- This 12V push button switch is suitable for almost any motorized vehicle of motor starting, power starting devices, and can also be an access control button.

12V Waterproof Push-Button On-Off Switch with quick connector for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc

Push Button Switch with waterproof rubber boot

Ideal for any 12 volt DC application requiring a waterproof on-off push button switch.

Works great for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc

with 3M taple on pack and quick connector easy install