The Best Road-king Powersports Handlebars of 2023

NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model.

Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.

Color Coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. If you have heated grips, you will need to purchase part # 2120-0498 heated grip extensions which are available in our store.

Fits 1996-2006 Harley Road King and Road Glide models without Cruise Control and without ABS brakes. Handlebar Specs are:  Height 18"  Total Width 37"  Center Width 10.5"  Pullback 7.5"

Please read the Special Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #, Does it have Cruise Control? Fuel Injection? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB102 and installing the 1 piece top clamp: 55918-08 Installation kits are also available: 1996-1998 model part #: HC-HIK-01B, 1999-2004 model part #: HC-HIK-02B, 2005-2006 model part #: HC-HIK-03B

Fitment: This part can make your 1" Bar to fit the 1-1/4" Handlebar riser clamps

Length:about 5 inch,Knurled center wide:3.5 inch.

Designed for 2007 and Newer Harley Dyna Wide Glide, Softail Fatboy, Softail Breakout, 2015 and Newer Road Glide, Road King Special and some CVO models with handlebar risers with 1 1/4" diameter mounting holes

Color:Chrome

Includes top and bottom pieces.

➤ FITMENT - The Motorcycle Handlebar Iron Drag Bars Are Perfect For Any Motorcycle With a 22mm Handlebar 7/8" Handlebar.

➤ MATERIAL - The Motorcycle Handlebar Is Made From High Quality Iron ,Which Is Strong And Durable, Not Easy To Wear, Rust And Corrosion, And Has A Long Service Life.

➤ SIZE - 7/8"mm（22mm）

➤ DESIGN-The Handlebar Design Of This Motorcycle is Simple, Classic and Fashionable. It is Definitely a Good Choice For You to Modify Your Motorcycle, Making Your Motorcycle More Stylish and Personal.

➤ PACKAGE INCLUDES - 1 * Motorcycle Drag Bar .Instruction Of Installation Is Not Include.

FITS 2014 AND BELOW ROAD GLIDES

FITS HARLEY SOFTAILS AND SPORTSTERS

HAND MADE IN THE USA

D.O.M TUBING

powdercoated

NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model.

Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.

Color Coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. Harley heated grips will not work with these bars since the heater won't fit inside.

Fits 1996-2006 Harley Road King and Road Glide models without Cruise Control and without ABS brakes. Handlebar Specs are:  Height 14"  Total Width 34"  Center Width 10"  Pullback 7.5"

Please read the Special Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #, Does it have Cruise Control? Fuel Injection? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB102 and installing the 1 piece top clamp: 55918-08 Installation kits are also available: 1996-1998 model part #: HC-HIK-01B, 1999-2004 model part #: HC-HIK-02B, 2005-2006 model part #: HC-HIK-03B

Fits under the stock cover

Includes all necessary installation hardware

CNC machined from 6061 T-6 aluminum with a raw finish Clamp has tapped holes to lock the handlebars in place once installed (setscrews included)

Allow the use of a wide selection of handlebars

Made in the USA

Fitment: 2002-later VRSC (excpet VRSCF and VRSCR) ; 2004-later XL (except XL88N and XL1200N) ; 2008-2013 XR ;

2006-later Dyna: (except FXDB) ; 2000-later Softail ; 2009-later Touring (except FLHTKSE and '15-later FLTRU, FLTRX and FLTRXS) ; 2009-later Trike models. Requires separate purchase of Phone Carrier Mount P/N 76000537

Package Includes: 1 x Handlebar Phone Carrier Mount Set for 76000537+76000549 ; Instructions not included

Holds devices measuring 1.75” to 3.5” wide ; Color: Black

Non-slip pads hold the device in place – in vertical or horizontal orientation ; Device can be removed in seconds when you reach your destination

➤High Quality: Made of high-quality aluminum + rubber lining, the durable material is waterproof, rust-proof, and corrosion-resistant, suitable for most environments, even in rainy, snowy or foggy days.

➤Slip Resistance & Safe: The glue points on the motorcycle grips surface not only decorate it but also enhance friction and prevent slipping. With reducing operating vibration, this hand grip effectively increase the safety factor.

➤Easy Installment: Directly replace the old handlebar grips, easy to install back to the original position without modification, easy to clean.

➤Convenient Throttle Assist: There is a cable throttle control on the right grip. The throttle assist makes it easier to rotate the throttle handle and you can operate the throttle without queezing it.

➤Package Included: A pair of motorcycle hand grips(left and right), instruction manual is not included.(Note: Hole diameter: 7/8" for bar side, 7/8" for throttle side. Please check the handlebar size and detail information carefully before your purchasing.)

【SIMPLE STYLE】:This classic drag bar style has sustain the test of time, it gives your bike a clean simple classic look.

【UNIVERSAL FITMENT】:It will almost fit most 1" application, including Harley Davidson motorcycles and most cruiser motorcycles.

【OPTIMAL MEASUREMENTS】: This handlebar's measurements: Width: 28 & 1/4" , Rise: 0" , Pullback: 4.5" , Center: 7.5"

【HIGH QUALITY】: This handlebar is in made in Taiwan backed with solid manufacturer quality control. They are powder coated, super resistant to scratch.

【YOUR SATISFACTION IS OUR GOAL】: We are confident that this drag bar is the most cost-effective one to get your job done, if you are not 100% satisfied, just contact us, we will work the issue out with you until you are 100% satisfied

Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & Road King Model & 1998-2013 Road Glide, Fit 1994-2021 Road King (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers)

Finish: Triple Chrome Plating(Copper+Nickle+Chrome). Condition: Aftermarket 100% brand new and high q uality.Material: Steel pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance.

Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 10-1/2 inch.Clamp Area Width: 5.4 inch & Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 12 inch. Model: Monkey Bagger Bar. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch. Knurling Inside Width: 2.5". Outside Width: 4.5".

Pretty easy to install, no drilling required. Provide more comfortable driving experience and aggressive appearance.

Package include: 1x Ape Hangers Handlebar.