The Best Rubber Electrical Tape of 2023

RUBBER-BASED ADHESIVE and the self-fusing, ethylene propylene, rubber backing provides UV resistance.

EXCELLENT PHYSICAL AND ELECTRICAL PROPERTIES promote moisture seal and void-free buildups.

DESIGNED FOR USE IN SPLICING and terminating wires and cables. Rated up to 90 degrees C (194 degrees F) continuous operating temperatures and short-term 130 degrees C (266 degrees F) overload service.

PROVIDES EXCELLENT THERMAL DISSIPATION of splice heat.

LINERLESS, SELF-BONDING, PRIMARY insulating tape rated through 69 kV (volts). This product can be used for low and high-voltage (through 69 kV) applications.

Meet ASTM D4388, D4325, and C518. RoHS 2011/65/EU Compliant.

Black Vinyl Synthetic Rubber Electrical Eape 1.5 Inch x 66 Feet per roll. Industrial Grade & Premium Quality. 8 mil (Thickness)

The tapes are rated up to 600 volts and 80 C (176 F)

The electrical tape is UL/CSA/CE Listed with superior resistant to UV, acids, alkalis, oil, moisture and abrasion.

T.R.U. Electrical Tape constructed from high quality Vinyl and easy to use. T.R.U. products are preferred by a wide range of industries that include Contractors, DIYers, Manufacturers, Retailers, Businesses, and personal use. T.R.U. products are preferred by many industry leaders in the Electrical, HVAC, Plumbing, and Automotive-aftermarket industries. Perfect for all of your electrical wiring needs including cable insulation, spliced wires, wire bundling, and all-around household tape.

ADHESIVE: Aggressive Rubber Based (to stainless steel) - MATERIAL TYPE: Plasticized PVC film premium grade in OSHA color - CORE: 1.5" inch in Diameter

Will not melt up to 260°C (500°F)

Remains flexible to -50°C (-60°F)

Tensile strength of 700+PSI

Insulates to 400 volts/mil

Resists weathering

Designed for low voltage electrical insulating and moisture sealing applications

This rubber splicing tape is compatible with solid dielectric cable insulations

Underwriters Laboratories (UL) listed up to 600 volts and temperatures up to 176F (80C)

Used in bolted connections, service drops, lightning and ground rod connections, and motor leads

Liner will not stick to the tape upon unwind and protects tape during application

RoHS 2011/65/EU Compliant

PRIMARY ELECTRICAL INSULATION for all wire and cable splices rated up to 600 volts

PROTECTIVE JACKETING for high-voltage cable splices and repairs

BUNDLE & REPAIR; harness wires and cables

INDOOR AND OUTDOOR USE; above- or below-ground applications

HIGH ADHESION in wide range of temperatures: 0°C (32°F)–80°C (176°F)

EXCELLENT RESISTANCE to abrasion, corrosion, alkalies, acids and weather

HIGH-STRENGTH STRETCH with elongation of 200%

FLAME RETARDANT

MADE IN THE USA

Produces a waterproof finish

Ideal for indoor or outdoor use

Insulates and protects electrical Splices and connections

Seals and protects wire splice connections, this formula is resistant to chemicals, solvents, saltwater and other common fluids

Linerless, self-bonding, insulating tape

Ethylene propylene base

Physical and electrical properties unaffected by degree of stretch

Uniform tape unwind from roll

Stable over wide application temperature range

Highly conformable, rubberresin adhesive and the selffusing, ethylene propylene, rubber backing provides UV resistance

Provides an excellent thermal dissipation of splice heat

Excellent electrical and mechanical properties offer a moisture seal and voidfree buildups

Tape measures 3/4 in x 30 ft x 30 mil

Comes in black color

Withstands temperatures up to 194 degrees F (90 degrees C)

Easily Seal Outdoor Antenna Coaxial Cable & Electrical Connections from Moisture, Dust and Corrosion

Thicker, Wider & Stronger Than Other Self-Fusing Silicone Tapes

Easy to Apply - Easy to Remove - No Messy Adhesive - Sticks Only to Itself - Forms Permanent Bond

Waterproof, UV, Saltwater, Chemical & Temperature Resistant

S-T-R-E-T-C-H this tape up to 3 times its initial length when applying to activate it - Watch the installation video in the photo gallery

Forms an airtight, protective, waterproof, UV resistant, dielectric coating

Prevents corrosion on wires and terminals, protects terminal screws from loosening due to vibration

Adheres to all metal, plastic, vinyl, rubber and composite surfaces and can be built-up with additional layers

Patented, UL-tested, fast drying formula & easy to use, cap has a brush applicator

Made with pride in the United States