The Best Solar Wind Power Inverters of 2023

1.This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.GFCI socket ,low frequency,low Idle Current,BTS cable, remote control

2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function

3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.

4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.

5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)/Back feeding protection

POWERFUL: 12V input, 3000W continuous, 9000W surge for 0.5 seconds, 25 amps pure sine clean power, low frequency, auto transfer switch and 100A smart battery charger for 8 different battery technologies including lithium.

PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.

FEATURES: 6 U.S Standard outlet, AC direct connect terminal block, charge current control dial, auto gen start, conformal coated, power save mode. Only one set of cables needed. Come with remote controller

5 WORK MODES:  Unattended mode,  Mains priority mode, Battery priority mode, Energy saving priority mode, Generator mode

APPLICATIONS: Ideal for applications going back and forth from shore/generator and inverter power automatically. Homes, boats, RVs, solar, mobile business & work trucks. Offgrid & back-up power.

1. This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.GFCI socket ,low frequency,low Idle Current,BTS cable, remote control

2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function

3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input

4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.

5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)
/Back feeding protection

The ORIGINAL SOLAR TRANSFER SWITCH - comes with LCD display which allows the user to define the Cut-Off and Recovery Voltages. USA customer service!

Great for solar or wind off grid systems. Automatically switches over to grid power on those cloudy or windless days and your batteries get low.

50A dual power transfer switch allows for trouble-free operation of inverters and AC mains in the same circuit.

Transfer Time: ≤10ms; 5500 Watts Max.; 12V, 24V or 48VDC; 110-120Vac 60Hz & 220Vac 50Hz all in one unit!

TWO YEAR WARRANTY! Very simple setup, please call us with any questions. Any bad reviews are due to incorrect setups. US based tech support, please use us as a resource.

1. This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.Low frequency,low Idle Current,remote control

2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function

3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.

4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.

5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)
/Back feeding protection

[3000W Pure Sine Wave Inverter]: 3000W power Pure Sine Wave Power, convert 110V/120V direct current to alternating current. Protect appliance life with no electromagnetic pollution.

[All-in-one]: 3000W power inverter and 80A bulit-in controller with LED display. It's very convenient to use and connect.Timely monitoring of the power input and output, able to respond to various unexpected situations at any time

[Two Options]: The UPS includes a function that automatically switches between [Battery Powered] and [Mains Powered].And ability to freely choose [AC priority power supply mode] or [Battery priority power supply mode].Intelligent switching, no longer worry about the weather or the impact of power（The mode can also be switched through the button）

[Multiple protections]: The protection of under voltage, overvoltage, overheat, overload, over current and short-circuit, etc.

[Backup Power]: Keeping Solar Uninterrupted Power Supply from Solar UPS Or Generators. It is the perfect Backup power solution for essential home appliances, emergency power electronics and full size office equipment during a power outage.

[Ideal Output]: The ideal daily power generation of our 800W Solar Wind Power Kit is up to 3KWH. The combination of solar and wind energy make it a good choice for both residential and commercial use.

[Wind Turbine Generator]: 400W wind turbine solve the problem that solar panels could not work during night time or when the sun is not strong enough. It has a low start-up speed, high wind power utilization, lightweight, low vibration with 3 blades and auto windward direction adjustment.

[PWM Hybrid Controller]: The Wind Turbine Generator Power Kit includes a 20A PWM Hybrid Controller for battery protection. It can automatically shut down when the battery is fully charged, protect it from overcharge and short circuit.

[100AH GEL Battery]: ECO-Worthy 100AH GEL Battery is perfect for solar wind off-grid system. It's rechargeable and maintenance-free. You can use it in your house, farm, RVs, boat and trolling motors.

[Package Include]: 2* 195W 18V Mono Solar Panel + 1* 1500W 24V Off-grid Invertor + 1* 16ft Solar Cable + 1* 400W Wind Turbine + 2* 100Ah GEL Battery + 1* 29ft Wind Turbine Cable

1. This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.Low frequency,low Idle Current,remote control

2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function

3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.

4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.

5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)
/Back feeding protection

【Beneficial to Solar or Wind System】: On cloudy or windless days when your battery gets low, it will automatically switch to grid power, protect your battery.

【Works like an opposite direction UPS】: The ATS controller will switch to grid power when batteries votagle are lower than cut off point,it will switch back to battery power when the batteries votagle are higher than recovery point.

【Auto distinguish】: DC 12/24/48V,AC 100-120V 60HZ / 220-240V 50HZ auto distinguish.User can define the Cut-Off and Recovery Voltages.Recovery voltage must be higher than Cut-off voltage. Battery type: Suitable for Sealed,Gel,Lead-acid,Lithium battery and so on. as long as the voltage of your battery are within the voltage ranges in the followings.9-17V at 12V system;18-30V at 24V system; 30-60V at 48V system.

【Big Power】: 5.5kw(110V) or 11KW(220v),Fast Transfer time:Inverter transfer to public power ≤10ms,public power transfer to inverter ≤16ms.

【LCD display】: Battery real-time voltage;working status of public power,inverter and battery.⭐Note: The controller needs to connect the battery, powered by the battery and get battery power data.

【POWERFUL DC-AC】2000W continuous, 4000W peak surge during load start-up, 12V to 120VAC pure sine wave with conversion efficiency >90%, reduces conversion loss.

【SAFE FOR USE】LED indicators for under-voltage and over-voltage protection, over-temperature protection, over-load protection, and short circuit indication. Cooling funs and ground-fault circuit interrupter (GFCI) protection.

【PROTECT YOUR ELECTRONICS】Advanced pure sine wave technology provides quality AC equivalent to grid power which will protect and extend the life of your electronics and appliances. With its quiet and high inductive loads, there are no strange buzzing sounds when your electronics are turned on and allow them to run smoother, cooler, and quieter.

【EASY-TO-USE】 Offers a built-in 5V/2.1A USB port, 3 AC Outlets and 1 AC Terminal Block, along with two 3tf 4AWG Cables and a 19.8ft Wired Remote.

【RELIABLE QUALITY】Etl certified product ensures safety and quality. 1-Year material and workmanship warranty