The Best Spout Gas Cans of 2023

Includes 3 X Tall (10") Spout. Made of Superior HDPE Plastic material.

Includes lot of accessories such as Stainless Steel False arrestor/Filter solid particles and prevent any serious damage.

Flexible for Bending (Superior Soft Plastic Material) Allow you Adjust the Angle to Put Gas into tank Simply and Easily

Replacement Gas Can Spout and Vent Kit Let's you Update Old Cans Instead of Buying a New One

3 pack , original quality

Fuel simply and easily - flows out without using any over-engineered anti-spill devices.

Equipped with a filter screen /flame arrestor. The kit includes a vent so that fuel flows out easily and evenly.

End cap screws securely to the end of the nozzle rather than simply push on. Extra cap included.

Comes with 2 different base caps compatible with most plastic gas cans. Otherwise, simply use the original ring. Chilton & No-Spill brand cans require an additional adaptor sold separately.

Includes stopper cap to allow storage in some cans.

Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing.

High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling.

Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.)

Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible.

Update your Old Gas Cans and Water Jugs. This Spout Kit is made with prime HDPE quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction.

3 Gas Spout including Rubber Gasket. Spout Length: Approx. 8.25”. Spout Fits on most of the cans out there. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout is the best way to stop fuel shortcomings.

3 Screw Collar Caps (3 Yellow and 3 Black). The outer diameter including side ribs: 2.75". Please check dimensions of hole of your can. Our Gas Can Spout helps get rid of inconveniences while travelling. Our Universal Gas Can Spout is providing our customers to make their transport safe & comfortable.

3 Multifunctional stopper caps; stopper cap is used as a cap for the spout and also works as a stopper which fits perfectly inside of the screw collar cap when hiding the spout inside of the gas can. 3 Vent Plugs are included as shown in the picture. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action.

GAS CAN IS NOT INCLUDED IN SALE. Push in vent plug and everything is included as shown in the primary image. Install this No Spill Gas Can Spout Replacement on your old gallon or gas containers & use it for backup generators when the power goes out or for other vehicles when they are out of the fuel. Our universal gas can spout never allow the single drop of the spill.

Made of Superior Plastic material with lifetime warranty. No other spout kit in the market can beat this quality. Let's hit the roads & transform your old can with this FLEXIBLE REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction.

Includes 8.70" Flexible long spout which is super flexible unlike other spouts available. Our Gas Can Spout helps get rid of inconveniences while travelling. Our Universal Gas Can Spout is providing our customers to make their transport safe & comfortable.

Includes lot of accessories such as Stainless Steel False arrestor/Filter solid particles and prevent any serious damage. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout is the best way to stop fuel shortcomings.

2 screw collar caps (fine and coarse threads - both collars have an inside dimension of 1 3/4") to use on most of the cans. Please check your container outside thread diameter before you place an order. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products.

For Vent Plug, Please drill a 1/2" Hole Into the Can & Then Push The Vent Into The Hole. This Is The Best Gas Can/Water Jug Spout Kit available in North America. Install this No Spill Gas Can Spout Replacement on your old gallon or gas containers & use it for backup generators when the power goes out or for other vehicles when they are out of the fuel. Our universal gas can spout never allow the single drop of the spill.

Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing.

High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps.

Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads，2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible.

Gas/water easily flows out without the need for other devices

Fits most plastic cans; 2 different styles of base caps included for maximum compatibility. Fits SOME metal cans-those that use a standard-size base cap like some Scepter & Briggs models

Push - in vent cap for faster and safer emptying

Each kit includes: (1) 9" flexible spout, (1) spout cap, (1) "O" ring gasket and filter screen, (2) base caps, (1) push-in vent cap. 2 Kits included.

Improved gasket

TWO (2) - Blitz Spouts / Nozzles / Rings & 2 Caps

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

All orders shipped the same day!

High Quality: The Gas Can Spout Kit are made of high strength ABS plastic, which are bendable and durable.

Easier to Pour: The Gas Can Nozzle flexible design bends up to 90 degrees, You can adjust the angle to pour gas into tank simply and easily

No More Spilling: This Flexible Pour Nozzle with Gasket, When you pouring the liquid, you will never spill gas all over yourself and your equipment again, Save fuel at the same time

All You Need: Package includes: 5* White Spouts with rubber gasket, 5 * Spout Caps, 10 *Screw Collar Cap (5 yellow and 5 Black), 5 * Black Rear Stripe Cap.

USA LOCAL SELLER , Quality Guarantee

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

HIGHLY COMPATIBLE: Our EZ-POUR rigid spout replacement and vent kit is a perfect fit for most water jugs and pre-2009 gas cans such as Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter cans, and many others. Due to its high compatibility, you don't need to change the spout type when using a different gas can every time, your time spent is important to us!

UPDATE YOUR OLD GAS CANS: With the EZ-POUR rigid spout replacement and vent kit, you don't have to go through the trouble of replacing your old can. Instead, you can bring your old gas can back to its new condition with our spout replacement and vent kit for easy storage and transportation of fuel.