The Best Studio Subwoofers of 2023

8-inch, front-firing, paper-composite transducer with high-elasticity rubber surround delivers smooth low-frequency transients.

100W Class AB amplifier (50W RMS) gives robust output with minimal distortion.

Now comes included with Studio One Prime and Studio Magic plug-in suite, over $1000 USD worth of music production software.

Input gain control gives -30 dB to +6 dB of continuously variable output.

Continuously variable lowpass filter keeps resonances in the 50 Hz to 130 Hz range.

Defeatable highpass filter removes sub-80Hz frequency content from the full-range signal sent to the main speakers.

Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs ensure easy connectivity.

Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs onboard for connecting satellite speakers.

Polarity invert switch corrects phase-cancellation issues.

Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse.

Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels

Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs

The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure

Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance

The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB

Purchase includes: studio monitor, power cable, and set-up guide

Inputs: balanced XLR (x2) and TRS (x2)

Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz

Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!

CREATES OPTIMAL SOUND: The Pyle Speaker Risers assist in achieving optimal audio performance. It reduces vibration and helps to eliminate unwanted levels of audio resonance while promoting the flow of 'clean' speaker sound projection

UNIVERSAL COMPATIBILITY: Includes 2 sound dampening riser platform pads that are universally compatible and works with virtually all speaker types, brands and models. It works perfectly w/ studio monitor, subwoofer, loudspeakers and shelf speakers

THICK DURABLE FOAM: Made of high density engineered foam that is lab-tested to promote efficient speaker stabilization, noise isolation and sound dampening absorption that gives your audio frequencies free-flow ability with more natural bass clarity

ANTI-SLIP BASE PAD: Features anti-slip rubber base pad which helps keep your speakers secured and stable. Also has a reversible upward/downward firing sound speaker placement w/ ability to mount speakers in 3 angles. Perfect for stage or studio use

33 LB LOAD CAPACITY: Each riser measures 9” W x 12” D x 2” H w/ maximum speaker weight capacity of up to 33lbs. High-density foam construction and universal speaker compatibility effectively stabilizes and reduces recoil for any audio application

CREATES OPTIMAL SOUND: The Pyle Speaker Risers assist in achieving optimal audio performance. It reduces vibration and helps to eliminate unwanted levels of audio resonance while promoting the flow of 'clean' speaker sound projection

UNIVERSAL COMPATIBILITY: Includes 1 sound dampening riser platform pad that is universally compatible and works with virtually all speaker types, brands and models. It works perfectly w/ studio monitor, subwoofer, loudspeakers and shelf speakers

THICK DURABLE FOAM: Made of high density engineered foam that is lab tested to promote efficient speaker stabilization, noise isolation and sound dampening absorption that gives your audio frequencies free flow ability with more natural bass clarity

ANTI SLIP BASE PAD: Features anti slip rubber base pad which helps keep your speakers secured and stable. It is also equipped with an integrated 'CNC' machined thick steel top plate for sturdy placement of speakers. Perfect for stage or studio use

90 LB LOAD CAPACITY: Each riser measures 15” x 15” x 1.8” w/ maximum speaker weight capacity of up to 90 lbs. High density foam construction and universal speaker compatibility effectively stabilizes and reduces recoil for any audio application

8inch bass-reflex powered subwoofer

22Hz - 150Hz frequency response

High-power 150W amplifier 

LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)

PHASE switch 

Studio ready flat frequency response allows mix engineers to truly hear what is being recorded and gives an uncolored representation of your final product. What you hear is what you get.

200 Watt RMS power give you plenty of headroom to hear extremely clean bass reproduction of your mix and is capable of shaking just about any studio environment when the mix is good.

Balanced XLR and ¼” ins and high-pass outs make this sub flexible for any project to professional studio set-up and use an open-latch footswitch (not included) to turn off the sub and run mains full-range

Take control of the sound with -20 to +6 dB gain knob, 0 or 180° polarity switch, and auto on function so your bass mix is exactly where you need it every time for any type of music project.

Buy with confidance with our 30-day money back guarantee and 1-year warranty.

Perfect combination of style and performance

8" polyfiber woofer

100-Watt bottom mounted class D amplifier

Ultra slim cabinet

This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.

The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.

High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.

Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.

The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.

Rockville APM10C 10" 400 Watt Active Studio Subwoofer in Classic Wood Finish. Built-in Class D Amplifier. 200 Watt RMS. Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF!

The enclosure is 0.7" thick while the front board of it is a full 1.34" thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board

Class "D" Amplifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel. Rubber woofer surrounds increases sound quality and eliminates unwanted distortions.

We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded! Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum.

Thick "Wadding" protects inside the subwoofer cabinet - Wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons.

Every subwoofer in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards. We use a "6Sigma" style Quality Assurance of Each Product

Inputs / Outputs / Controls: Volume control. Crossover Frequency Control allows you to adjust low frequency input: 50Hz - 150Hz. 1/4" TRS input jack. Left and Right XLR input/outputs. RCA input/outputs.

Details: Certification: CE and RoHS Compliant. Amplifier: Class D, very efficient amplifier with top components! (ST--STA309, ST--STA516, SMPS).Woofer Impedance: 8 Ohm. Signal to noise ratio: 98 dB (Maximum output with THD+1<1%, A-weight).THD: 0.8%.

Frequency Response: 34Hz - 150 KHz. 400 Watts peak output. 200 Watt RMS output.Input voltage: 120V. 10" woofer with rubber surround and paper cone with painted. Product Dimensions in Inches: (W*H*D): 13.4'' x 14.5'' x 15.7''.

Shipping Dimensions in Inches: (W*H*D)17.3 ''x 19.3'' x 19.7 ''. Net Weight: 28.7 LBS. Shipping Weight: 34.1 LBS.Input Impedance (Ohms): 10 K Ohm Balanced. System Volume: (-30dB to +6dB)

Professional studio-quality sound

1/4” TRS, RCA, and Bluetooth inputs with 1/4” TRS and RCA outputs

Adds Bluetooth streaming to any studio monitors

200 watts of clean, accurate sound with an 8" woofer

Desktop remote volume control included