The Best Table Saw Accessories of 2023

Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches

Gauge head is CNC machine perfectly square to the bar and table ( no stampings)

Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver

Microadjuster allows additional angle adjustment to 1/100th degree

Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty

Protect hands and prevent kickback like never before

Powerful high-friction durable grip for extreme hold

Precision cutting and control down to 1/4" Ripping

Fully adjustable for easy handling

Work with small stock safely on the table saw, Router table, Jointer, & Band saw

Designed in USA. A true MICROJIG Innovation.

3-Directional Force for total control of the workpiece

Moving-Blade-Guard Hand protection

Precise 1/4" thin rips

Virtually eliminates kickback

Work with small stock safely

Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile stands

Heavy-duty kickstand allows the stand to balance upright for mobility and storage

Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading

Wide stand base and offset rear legs provide stability and support for material feed control

Folding legs with quick release levers collapse under the stand, minimizing overall size for transport.

Dust Collector Bag with Wire Support Frame;

Helps keep work area cleaner; Collects up to 75% of dust and particles;

Replaces Bosch part TS1004; Easy to attach and detach to your tablesaw;

Dimensions: L 31" x W 13.7" head side x W 9.8" end side, D of ring 2.5" up to 2 7/8";

Can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw.

ONE KNOB FOR QUICK ADJUSTMENTS: Our hedgehog spiral featherboard has a simplified design that features only one knob for quick, easy, and seamless adjustments. This single pivot point streamlines woodworking while maximizing your productivity.

PERFECT FOR BEGINNERS: If you are just starting out in woodworking, this single knob featherboard will make it easier than ever before for you control and cut wood accurately, using just one hand at a time.

CLEANER, SMOOTHER CUTS: The precision and accuracy in this premium featherboard ensures that you can hold the wood tight against the fence which results in cleaner, smoother cuts. Dramatically improve the quality of your woodworking production.

REDUCE KICKBACK & OTHER DANGERS: Thanks to the snug fit of this featherboard, reduce wood kickback, which makes it a safer working environment for you.

IMPROVED QUALITY OF WORK: This premium, single pivot point featherboard will guarantee high quality output every single time. It’s perfect for hobbyists and professionals looking to create wooden masterpieces.

If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.

Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!

UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do.

The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.

We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19” long by 3/4” by 3/8” UHMW bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.

Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.

The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.

Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.

The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.

The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.

Build Table Saw Sleds Fast

No Slop, Side-To-Side Play Or Seasonal Warping

Top-Down Installation For Easy And Fast Mounting To Jigs, Fixtures And Sleds

Zeroplay Miter Bars Will Fit Any Standard (3/4” X 3/8”) T-Track Miter Slot That Measures Between 0.73" And 0.79" Wide And At Least 5/16" Deep

This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process

Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.

The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

GRR-RIPPER Accessory for ripping 1/8" thin rips consistently and cleanly on a table saw

Attaches directly to the main body of the GRR-RIPPER or directly to the Side Leg of the GRR-RIPPER

Powerful Green GRR-RIP holds and feeds wood through the cut

Easily cleans with denatured or rubbing alcohol

Perfect for edge bending, veneer, inlays, decorative design, model building and more.

Made in the USA. A true MICROJIG Innovation.

Use for Wood Veneer.

Keep clean with alcohol denatured.