The Best Wall Mount Kitchen Faucet of 2023

Wall Mount Kitchen Faucet: 8-inch center commercial faucet with 8 inch gooseneck switch spout nozzle easy to be compared with your stainless steel/ceramic/acrylic/crystal stone or prep utility sinks.

Easy DIY Installation: You may install the kitchen sink faucet less than 15 minutes following the manual or install video. (Attention: please install gasket in your female thread during install).

Control on Your Commend: DuraSteel sink faucet features a dual temperature lever handles and a double O-ring 8 inch swing spout which rotates 360 degree. The dual handles can direct hot or cold water to anywhere you desire.

Reinforced double O-Ring valves with hot and cold mark on stem,Color coded red and blue handles with heavy duty double O-ring swivel spout

1/2" NPT female inlets. NSF approved,professional designers and unique design quality kitchen faucet will be a highlight of your kitchen

Adjustable: 8" adjustable center distance (available for hole distance: 7.75"-8.25"). And the swing faucet spout can be rotated 360 degrees, suitable for sinks with compartments. The design of the double handle can adjust the temperature of cold and hot water

Good Quality: This faucet is certified in accordance with CUPC. Compared with ceramic cartridge valves, Brass compressed cartridge with check valve are more durable and avoid fragility

Easy to Install: Standard 1/2 NPSM male outlet and 1/2 NPT male inlet installation kits ( female adjustable), the installation can be adjusted to fit space requirements

Material: The faucet is made of high quality brass with a chrome-plated surface for easy cleaning and corrosion protection

Applicable Scenes: This faucet makes it suitable for many indoor or outdoor places, such as restaurants, gyms, kitchens, garden, farmhouses, backyard, laundry, supermarkets, etc

LUXURY WITH PERFORMANCE - Style with silver series faucets for kitchen sinks, bathrooms, outdoors, etc. It is ergonomically designed to fit almost everywhere and can withstand the most demanding commercial environments. Easy to use and maintain the luxurious look with chrome-plated silver finish.

STANDARD SPECIFICATION - kitchen sink faucet 4” spread center wall mounts are perfect for any commercial kitchen or bar. It has three holes configuration with 10” swing spout flows water in your direction. ¼ turn durable hot and cold ceramic valves and 1/2” NPT male inlet makes it ideal to use.

2 GPM HIGH WATER FLOW RATE - Are you tired of low water flow, irregular or splashes from your faucets? We have the superior sink faucet for you with a 2 GPM high water flow rate in daily use. Just install it once to enjoy washing and rinsing with easy handling, and flawless water flow.

DOUBLE O RING VALVES - Mostly utility sink faucets wear out with time and constant use due to weak internal parts that usually include O ring valves. Krowne kitchen faucets are Internally supported with double O ring valves to provide you a comfortable long-lasting leak-proof experience.

MOUNTING KIT INCLUDED - Wall mount faucets usually need the assistance of plumber for installation and fixing it afterward but we have included a mounting kit so that you could easily install your faucets with or without any assistance of your plumber. Includes 2 Lock Nuts and 2 Ribbed Washers.

【INSTALLATION KIT FOR BACKSLASH MOUNT】This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink

【1/2 IPS STRAIGHT THERAD】it is NOT 1/2 NPT,it's 1/2 IPS which is also called G1/2,fitting wall commerical faucets with G1/2 female end

【LEAK FREE】its one-piece construction for no leaking

【EASY TO INSTAL】Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet

【SOLD IN PAIR】comes with 90 degree angled elbow joint x 2,lock nut x 2,plastic washer x 2 and rubber washer x 2

【Durable Construction】This wall mounted kitchen faucet constructed of 304 stainless steel, Brushed Nickle finish,prevent to be discolored,rusty.Suitable for lifelong use

【Very easy to Install】faucet tow hole distance is 6 inch(15cm), Wall mount type with 2 hole installation.Ship with adjustable adapter to adjust installation hole distance between 2.6 inch to 9 inch,suitable for 4",6",8" and 9" inch center installation.Thread is male to male thread, Please confirm the thread size before purchase.(picture 5).

【SPRAY and STREAM Mode 】 Powerful pre-rinse spray perfects to flush the food debris easily. The splash-free aerated stream function ideals for food washing and water filling.

【Features】Single handle to control hot and cold water, Include all the install mounting hardware

【what you get】2 years gurantee, should you have any problem, please contact our customer service. We will provide you full refund or free replacement during the gurantee time.

EASY INSTALLATION: Designed to fit 2-hole, wall-mounted configurations with 7-9 inches between hole centers

COMPLETE FLEXIBILITY: The high arc, wall-mount design swivels 360 degrees for added convenience during everyday kitchen tasks

2-HANDLE DESIGN: The two-handle design provides total control in finding the perfect water temperature

PURCHASE SUPPLY LINES SEPARATELY: Standard supply lines are required for installation and must be purchased separately to complete the unit

【Healthy Faucet】NSF & CUPC approved, lead-free, use food-grade materials, which is healthy and safe.

【Convenient faucet】 Flexible nozzle, which can rotate 360 degrees, and the flushing distance can reach 35cm. There are spray mode and steam mode, which is more convenient to use.

【Solid Faucet】The faucet is made of sturdy 304 stainless steel. After high-standard processing and strict inspection, there is no leakage. High-grade brushed nickel can well prevent corrosion, discoloration and rust in daily use.

【Easy installation】 The installation hole distance can be adjusted between 7.3 inches and 8.5 inches (18.5cm-21.5cm) through the NPT 1/2 adapter. With Teflon tape and installation instructions, easy to install.

【Reassured Faucet 】Lifetime limited warranty, providing first-class customer service to support your needs. If you have any comments or suggestions, please contact us.

[Every Replacement Part in the Store] We sell all the spare parts for your need: 5",8",14" short spout; 90 degree brass elbow installation kit (Asin:B07RVB6R4J) for this wall mount faucet.

[Casting Brass Faucet Body] Our casting brass faucet body has a longer service life than other brands' machining body. With the chrome-plate brass construction, this faucet provides a polished look. No rust, no cracks, no leaks.

[Chrome-Plated Copper] This faucet features a chrome-plated copper construction that looks great in any setting and is easy to keep clean.

[Packing list] 8” center wall mount faucet body, two flanges with 1/2NPSM female thread, a pair of 1/2 male straight fittings, 12“ spout.

[CWM Offers You Professional Commercial Type Faucet] We also have 21" 25” 35" 43" and 47" commercial faucet with sprayer in our store, and many kinds of wall/deck mount faucet for you to choose. Just search “CWM faucet”

[Material]:Manufactured from solid brass with Lead-Free Waterway for sturdy and heavy-duty.strong tarnish and corrosion resistance.It will not leak.

[Design]:The spray head designs with 360-degree twist which rinses to every corner of the sink.Powerful spray perfects to flush the food debris easily.

[Function]:The hot and cold mixer valves with two cross handles for control the temperature and water flow.

[Installation]:Wall mount kitchen sink faucet.Easy for installation.Come with installation instruction.

[Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use.

7" Swivel Spout

1/4 Turn Ceramic Disc Cartridge

11" Spout Reach from the Wall; 3-5/8" - 8-1/2" Adjustable Spread

Max 1.8 GPM/6.8 LPM Water Flow Rate At 60 PSI (ASME standard)

Compliant with California Energy Commission Title 20